Christie HD10K-M Installation Information

Product Safety Guide

020-102690-02

M Series and Mirage M Series

Important Safety

Information

Read this document carefully before installing or operating the M

Series and Mir

age M Series products. Store the document in a

location close to the product for future reference.

Product documentation

For installation, setup, and user information, see the product

documentation available on the Christie website. Read all

instructions before using or servicing this product.

M Series

1. Access the documentation from the Christie website:

• Go to this URL:http://bit.ly/2OsZQ2I or https://

www.christiedigital.com/en-us/business/products/

projectors/3-chip-dlp/m-series.

•

Scan the QR code using a QR code reader app on a

smartphone or tablet.

2. On the product page, select the model and switch to the

Downloads tab.

Mirage M Series

1. Access the documentation from the Christie website:

•

Go to this URL:bit.ly/2C6H4HZ.

•

Scan the QR code using a QR code reader app on a

smartphone or tablet.

2. On the product page, select the model and switch to the

Downloads tab.

Related documentation

Additional information on the projector is available in the

following documents.

• M Series Installation and Setup Guide (P/N: 020-101941-

XX)

• Mirage M Series Installation and Setup Guide (P/N:

020-101944-XX)

• M Series User Guide (P/N: 020-101948-XX)

• M Series Service Guide (P/N: 020-100551-XX)

• M Series Serial API Commands Technical Reference (P/N:

020-100224-XX)

Notation

Learn the hazard and information symbols used in the product

documentation.

Danger messages indicate a hazardous situation

which, if not avoided, results in death or serious

injury.

Warning messages indicate a hazardous situation

which, if not avoided, could result in death or

serious injury.

Caution messages indicate a hazardous situation

which, if not avoided, could result in minor or

moderate injury

.

Notice messages indicate a hazardous situation

which, if not avoided, may result in equipment or

propert

y damage.

Information messages provide additional

information, emphasiz

e or pro

vide a useful tip

.

Product labels

Learn about the labels that ma

y be used on the product. Labels

on your product may be y

ellow or black and white.

General hazards

Hazard warnings also apply to accessories once they are

installed in a Christie product that is connected to power.

Fire and Shock Hazard

To prevent fire or shock hazards, do not expose this

product to rain or moisture.

Do not alter the power plug, overload the power

outlet, or use it with extension cords.

Do not remo

ve the product enclosure.

Only Christie qualified technicians are authorized to

service the product.

Electrical Hazard

Risk of electric shock.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to

service the product.

M Series and Mirage M Series Product Safety Guide 2

020-102690-02 Rev. 1 (02

-2020)

Copyright

©

Electric shock hazard. To avoid personal injury,

disconnect all power sources before performing

maintenance or service.

Hot surface hazard. To avoid personal injury, allow

the product to cool for the recommended cool down

time before performing maintenance or service.

Fan hazard. To avoid personal injury, keep hands

clear and loose clothing tied back. Always

disconnect all power sources before performing

maintenance or service procedures.

Mandatory action

Disconnect all power sources before performing

maintenance or service procedures.

Consult the service manual.

Additional hazard labels

Indicates a light hazard. Do not look directly into the lens. The

extreme high brightness can cause permanent eye damage.

RG2 IEC 62471-5:2015

Indicates an electrical shock hazard. Disconnect the projector

from AC before servicing.

Indicates the lens must be secured to the projector with a

screw.

Indicates that the lamps are under high pressure and may

explode if not handled properly. Allow lamps to cool before

servicing.

Important safeguards

To prevent personal injury and to protect the device from

damage, read and follow these safety precautions.

General safety warnings

Warning! If not avoided, the following could result in

death or serious injury.

•

This product must be oper

ated in an environment that

meets the operating r

ange as specified in this document.

•

FIRE HAZARD! Keep hands, clothes, and all combustible

material away from the concentrated light beam of the

projector.

• TRIP OR FIRE HAZARD! Position all cables where they

cannot contact hot surfaces, be pulled, be tripped over,

or damaged by persons walking on or objects rolling over

the cables.

• All procedures must be performed by Christie qualified

technicians.

• A minimum of two people or appropriately rated lift

equipment is required to safely lift, install, or move the

product.

•

Do not operate the product without all of its covers in

place.

• SHOCK or FIRE HAZARD! Do not operate the product

with any internal part removed.

Important Safety Information

M Series and Mirage M Series Product Safety Guide 3

020-102690-02 Rev. 1 (02

-2020)

Copyright

©

• Observe all electrostatic precautions. Use a grounded

wrist strap and insulated tools when handling, servicing,

or cleaning electronic assemblies.

• TIP HAZARD! Stacked fr

ames must be secured together

using all locking pins.

• UV EXPOSURE! Protective UV safety glasses with side

shields and Christie approved protective safety clothing

must be worn when performing optical adjustments or

servicing the product.

• FIRE AND SHOCK HAZARD! Use only the attachments,

accessories, tools, and replacement parts specified by

Christie.

• Always provide proper ventilation for the product to

prevent overheating.

Caution! If not avoided, the following could result in

minor or moderate injury

.

• Do not operate the product without a lens installed.

•

Do not oper

ate the product without the filter installed.

•

Use only high efficiency

Christie approved filters.

• The American Conference of Governmental Industrial

Hygienists (ACGIH) recommends occupational UV

exposure for an 8-hour day to be less than 0.1

microwatts per square centimeters of effective UV

radiation. A workplace evaluation is advised to assure

employees are not exposed to cumulative radiation levels

exceeding the government guidelines for your area. Be

aware that some medications are known to increase

sensitivity to UV radiation.

AC/Power precautions

Warning! If not avoided, the following could result in

death or serious injury.

•

FIRE AND SHOCK HAZARD! Do not attempt operation

unless the power cord, power socket, and power plug

meet the appropriate local rating standards.

•

SHOCK HAZARD! Disconnect the product from AC before

installing, moving, servicing, cleaning, remo

ving

components, or opening any enclosure.

• SHOCK HAZARD! Power supply uses double pole/neutral

fusing. Disconnect all power sources before opening the

product.

• SHOCK HAZARD! Only use the AC power cord provided

with the product or recommended by Christie.

• SHOCK HAZARD! Do not attempt operation if the AC

supply is not within the specified voltage and current, as

specified on the license label.

• Never compromise the ground or earth connection of the

product.

• FIRE HAZARD! Do not use a power cord, harness, or

cable that appears damaged.

•

SHOCK HAZARD! The AC power cord must be inserted

into an outlet with grounding.

Lamp precautions

Warning! If not avoided, the following could result in

death or serious injury.

•

EXPLOSION HAZARD! Allow sufficient time for the lamp

to cool down before powering down the product,

disconnecting it from AC, and opening the lamp door.

• Do not open the lamp door while the lamp is on.

• Improper installation of the lamp can damage the

projector

.

•

Do not look directly into the lens when the light source is

on. The extremely high brightness can cause permanent

eye damage.

•

Dispose of bare bulb with packaging according to local

area regulations.

Power specifications

Item Description

Rated voltage 100 VAC – 240 VAC

Rated current (dual lamp operation)

450W 1080p / SXGA+ /

WUXGA

15 A @ 100 VAC

370W 1080p / SXGA+ /

WUX

GA

12 A @ 100 VAC

Line frequency 50/60 Hz

AC input coupler 15 A, 250 VAC

Type of connector IEC 320-C14 with wire cable clamp

Line cord 14AWG type FT1 with plug, NEMA

5-15P, 15A

Inrush current 60 A maximum

Maximum power

consumption

Dual lamp

1080p / SXGA+ /

WUXGA

1500W (dual lamp) / 750W (single

lamp)

1320W (dual lamp) / 831W (single

lamp)

1267W (dual lamp) / 805W (single

lamp)

1135W (dual lamp) / 739W (single

lamp)

871W (dual lamp) / 607W (single

lamp)

Important Safety Information

M Series and Mirage M Series Product Safety Guide 4

020-102690-02 Rev. 1 (02

-2020)

Copyright

©

Item Description

739W (dual lamp) / 541W (single

lamp)

Technical support

• North and South America: +1-800-221-8025 or

[email protected]

• Europe, Middle East, and Africa: +44 (0) 1189 778111 or

[email protected]

• Asia Pacific: +65 6877-8737 or

[email protected]

Important Safety Information

M Series and Mirage M Series Product Safety Guide 5

020-102690-02 Rev. 1 (02

-2020)

Copyright

©

Page is loading ...

•

アジア太平洋：+65 6877-8737 または

[email protected]

重要な安全性情報

M Series and Mirage M Series 製品安全ガイド 20

020-102690-02 Rev. 1 (02-2020)

©

Page is loading ...

For the most current technical documentation, visit www.christiedigital.com.

Christie Digital Systems Canada Inc.

ph: 519 744 8005

Christie Digital Systems USA, Inc.

ph: 714 236 8610

Corporate ofﬁ ces

United Kingdom

ph: +44 (0) 118 977 8000

Middle East

ph: +971 (0) 503 6800

Spain

ph: +34 91 633 9990

Singapore

ph: +65 6877 8737

Africa

ph: +27 (0)11 510 0094

Korea (Seoul)

ph: +82 2 702 1601

Japan (Tokyo)

ph: 81 3 3599 7481

India

ph: +91 (080) 6708 9999

Germany

ph: +49 (0) 221 99512 0

France

ph: +33 (0) 1 41 21 44 04

Russia

ph: +36 (0) 1 47 48 100

China (Shanghai)

ph: +86 21 6030 0500

China (Beijing)

ph: +86 10 6561 0240

Brazil

ph: +55 (11) 2548 4753

Australia

ph: +61 (0) 7 3624 4888

Worldwide ofﬁ ces

Italy

ph: +39 (0) 2 9902 1161

Independant sales

consultant ofﬁ ces

Mexico

ph: +52 55 4744 1790

United States (Arizona)

ph: 602 943 5700

Columbia

ph: +57 (318) 447 3179

Page is loading ...

Christie HD10K-M Installation Information

Christie HD10K-M Installation Information

in other languages

Related papers

Other documents