SIGMA SPORT SC 6.12 User manual

1

SC 6.12

www.sigmasport.com

STOPWATCH

TOP BUTTON - MEMORY - ALARM

STOPWATCH

DEPL US/GBCZ FRSI ITPT ESNO NLRU

Page is loading ...

10 11

LI =

Lithium Ionen

LI

US/GB

2

1

Contents

1 Activating the SC 6.12 11

2 Starting and stopping the SC 6.12 11

3 Accessing the menu level 12

4 Accessing the training sessions 12

5 Conﬁguring settings (time/date/alarm) 14

6 Display overview 15

7 Button functions 16

Further information

Warranty conditions

For further information and to view our frequently asked questions (FAQs),

please visit www.sigmasport.com.

The warranty does not cover the battery, changes due to normal wear and tear,

damage caused by improper handling/use or damage caused by a lack of care,

commercial use or accidents.

You can find the CE declaration under: www.sigmasport.com

Batteries must not be disposed of in household

waste (Battery Law)! Please take the batteries

to an official collection point for disposal.

Starting and stopping

the SC 6.12

Activating the SC 6.12

To train with your SC 6.12, press and hold any button for

two seconds.

You will receive your SC 6.12 in transport mode to

conserve the battery. You must therefore wake it up

before its first use. This can be done as follows:

Your SC 6.12 is now in training mode.

Press the top button to start training.

Press the stop button to end the training session.

The stopwatch stops. If you wish to exit the training menu,

press and hold the bottom left button.

Press and hold the START/LAP button for five seconds.

The watch is now in time mode.

12 13

US/GB

4

3

Accessing the training

sessions

To access the menu level, press and hold the bottom right

button for two seconds.

You are now in the menu level and can select between MEM

and SET. By selecting MEM, you can view your last seven

training sessions.

To set the clock, select SET. To exit the menu level, press

and hold the bottom right button for two seconds.

To access your training sessions on your SC 6.12,

press and hold any button for two seconds.

Your SC 6.12 is now in training mode.

To access the menu level, press and hold the bottom right

button for two seconds.

Press the top button to select the menu option MEM.

You are now in the training memory in which you can use

the Toggle/+ and Toggle/- buttons to scroll back and forth

through the individual training sessions. The date on which

the training session took place is displayed. This makes it

easy for you to select the desired session by pressing the

top button.

You can view the following data, starting with training

session’s start time:

 Start time

 Average lap time

 All laps including an indication of the best lap

(best lap symbol)

Press the Toggle/+ or Toggle/- button to switch between

the laps.

Accessing the menu level

To access your SC 6.12’s menu level, press and hold any

button for two seconds.

Your SC 6.12 is now in training mode.

14 15

5

6

US/GB

Conﬁguring settings

(time/date/alarm)

To conﬁgure settings, such as the time, on your SC 6.12,

you should proceed as follows: Press and hold any button

for two seconds.

Your SC 6.12 is now in training mode.

To access the menu level, press and hold the bottom right

button for two seconds.

To conﬁgure a setting, select SET by pressing the top button.

CLOCK appears. Press the Toggle/+ or Toggle/- button to

go to one of the setting options CLOCK/DATE/ALARM/

TONE. Conﬁrm your selection by pressing the top button.

Press the Toggle/+ or Toggle/- button to increase or

decrease the value. Press the top button to conﬁrm the

value. To cancel the setting process, press the STOP button.

You can use this procedure for all four menu options.

Display overview

 Accessing the memory:

Training session

number

The most recent

training session is

number 1

Date of the training

session

 Training mode:

Number of laps

Light mode is enabled

Lap time

Stopwatch

Stopwatch iconAlarm icon

Best lap icon

 Sleep mode:

Time

Date

Alarm (on)

16 17

7

US/GB

STOP button:

Press:

In training mode:

Stop the stopwatch.

In setting mode:

Go back to the

previous view

Press and hold:

In training mode:

Reset training session –

the data is saved.

In setting mode:

No function

Toggle/- :

Press:

In training mode:

Change the view

from stopwatch to time.

In setting mode:

Navigate between the

menu options and

decrease values.

Press and hold:

In training mode:

End the training session.

The training session is

saved and can be accessed

in the memory (MEM).

In setting mode:

Rapidly decrease values.

START/Lap :

Press:

In training mode:

Start training or

record lap.

In setting mode:

No function.

Press and hold:

In training mode:

Open the Easy LapView function

to view previous laps.

In setting mode:

No function.

Toggle/+ :

Press:

In training mode:

Change the view

from stopwatch to time.

In setting mode:

Navigate between the menu

options and increase values.

Press and hold:

In training mode:

Open the menu level.

In setting mode:

Close the menu level or

rapidly decrease values.

Button functions

You can operate your sport computer by either

pressing or pressing and holding the buttons

(for two seconds).

Page is loading ...

100

www.sigmasport.com

STOPWATCH

SIGMA-ELEKTRO GmbH

Dr.-Julius-Leber-Straße 15

D-67433 Neustadt/Weinstraße

Tel. + 49 (0) 63 21-9120-0

Fax. + 49 (0) 63 21-9120-34

E-mail: [email protected]

SIGMA SPORT ASIA

Asia, Australia, South America, Africa

4F, No.192, Zhonggong 2

nd

Rd.,

Xitun Dist., Taichung City 407, Taiwan

Tel. +886-4- 2358 3070

Fax. +886-4- 2358 7830

SIGMA SPORT USA

North America

3487 Swenson Ave.

St. Charles, IL 60174, U.S.A.

Tel. +1 630-761-1106

Fax. +1 630-761-1107

Service-Tel. 888-744-6277

286120/3

SC 6.12

SIGMA SPORT SC 6.12 User manual

SIGMA SPORT SC 6.12 User manual

in other languages

Related papers

Other documents