CATALOGUE
1.Summary---------------------------------------------------------------------------------------------------1
1.2FunctionandCharacteristic-------------------------------------------------------------------------1
1.3TechnicalData----------------------------------------------------------------------------------------1
2.KeyboardConnection------------------------------------------------------------------------------------2
2.1.1Rs422andRs485-----------------------------------------------------------------------------2
2.1.2RJ45Interface--------------------------------------------------------------------------------2
3.Keyboardoperationmanual--------------------------------------------------------------------6
3.2LCD----------------------------------6---------------------------------------------------------
3.3Joystickcontrolsdome-------------------------------6--------------------------------------------------
3.4Changeobjectdome------------------------------------7-------------------------------------------------
3.6.1Preset----------------------------7--------------------------------------------------------
3.6.3Pattern------------------------------8-----------------------------------------------------
3.6.2Scan--------------------7--------------------------------------------------------------
2.1KeyboardInterfaceInstruction--------------------------------------------------------------------2
2.4ConnectwithTheDomeDirectly-------------------------------------------------------------------4
3.5Comelens-------------------------------------7ontrold--------------------------------------------------
3.6Setdomefunction-------------------------------7------------------------------------------------------
3.7Calldomemainmenu-----------------------------------8---------------------------------------------
3.8Controlmatrix-------------------------------------8-----------------------------------------------------
3.6.4Tour------------------------------8---------------------------------------------------------
1.1Notice-------------------------------------------------------------------------------------------------1
2.3.1RJ45LocalConnection---------------------------------------------------------------------3
2.3.2RS422RemoteConnection------------------------------------------------------------------3
2.3MatrixConnection-----------------------------------------------------------------------------------3
3.1Current-carryingtokeyboard------------------------------------6-------------------------------------
3.8.1Switchdomeinorder-----------------------------8--------------------------------------------
3.8.3Confirmafterprogram------------------------------8---------------------------------------------
3.8.2Callmatrixmainmenu---------8---------------------------------------------------------------
3.8.4------------------------------8Changeobjectmonitor---------------------------------------------
4.Keyboardcontrol----------------------------------------------------------------------------------------9
4.1keyboardindexsetting-----------------------------------------------------------------------------9
4.1.1SetIDnumber--------------------------------------------------------------------------------9
4.1.2Setthebaudrate-----------------------------------------------------------------------------9
4.1.3Joystickcalibration------------------------------------------------------------------------10
4.2Domesetting----------------------------------------------------------------------------------------10
4.2.1Domepresetsetting------------------------------------------------------------------------11
4.2.3Domepatternsetting------------------------------------------------------------------------12
4.2.4Dometoursetting----------------------------------------------------------------------------12
2.5TheConnectionofTheKeyboardinTheSystem-------------------------------------------------5
4.1.5Keyboardmessagedisplay----------------------------------------------------------------10
4.2.2Domescansetting----------------------------------
-------------------------------------------11
4.3Protocolsetting-------------------------------------------------------------------------------------12
4.3.1Pelcomatrixmodel---------------------------------------------------------------------------13
4.3.2Domecontrollingmode----------------------------------------------------------------------13
4.4Exitkeyboardmenu----------------------------------------------------------------------------------13
5.Appendix--------------------------------------------------------------------------------------------------14
5.1------------------------------------------------------------------------14Rs485BusBasicKnowledge
5.2Keyboardshortcutoperationmanual--------------------------------------------------------------15
6.KeyboardMenuIndex------------------------------------------------------------------------------------16
4.1.4Multikeyboardstate------------------------------------------------------------------------10
1
1.Summary
Summary
1.1Notice
●Pleasereadthemanualcarefullyand heed
instructions contained within
●Pleasedo notplacethekeyboard in a damp
environment.
●Pleasedo not place the keyboard next to sources of
high heat.
1.2FunctionandCharacteristic
●
●
●
●
Rs485BusLine,andakeyboardcanconnectto
31 domes in thedirectcontrol mode.
.YoucancontroltheIrisLocusandZoom.
Youcansetandcallthepreset,runscanpattern
andtour.
●You cancontrol the matrix,
throughwhichwhichcan control thedome
indirectly.
●Ithasbeen
equippedwiththe2D/3Djoystickand alarge LCD
screen.
Itcanbecompatiblewithallkindsofprotocols
、
、
1.3TechnicalData
Electrical
Inputvoltage9V-12VAC/DC
Ratedpower2.5W
◆
：
：
◆
：
×， ×
：
、
：
（）
◆
～
℃
：
◆
（）
：（）
Communication
Communicationinterface
RS4851RS4221,RJ45
Communicationfrequency
2400,4800,960019200Bps
Communicationdistance
1.2kmRS485andRs422canachieveit
50
Relativehumiditylessthan90%
Physicalproperties
L*W*H=218*180*55mm
Weight630gNetWeight
Operationalenvironment
Operatingtemperature0：
℃
This keyboard can be unversally used to control PTZ
cameras within a wide variety of security control room
environments. The keyboard has been equipped with a 2D
& 3D joystick, which can control the movement of the
camera and the zoom magnification lens. It also
incorporates an LCD screen with backlight enabling you to
read the screen details in a variety of locations with
varying light levels. The screen displays the current
operation order, the control protocol's name, the current
PTZ camera's ID, the current monitor's ID, and also what
the current state the joysticks are in. Controlling the your
CCTV with the joystick will make security processes quick
and efficient.
RJ45
2
Picture2-1.1
Picture2-1.2
2.KeyboardConnection
2.1KeyboardInterfaceInstruction
There isaninterfaceonthe backofthekeyboard,
which allows you to either have a direct
connection to the PTZ cameras or a connection
via a network.
Connection
2.1.1RS422andRS485interface
Rs422andRs485interfaceareonthe6bit
ribboncableconnectionofthekeyboard.RS485
(A+B-)canconnectwiththedomewhenthekey-
boardcontrolsthedomedirectly;RS485A+B-
canconnectwithDVRorotherkeyboardswhen
thekeyboardcontrolsthedomebymatrix;Rs422
(T,T)issendingthesignal,RS422(R,R)
isreceivingthesignal,bothofwhichcanconnect
withmatrix,DVRandsoon.
（，）
＋－＋－
2.1.2RJ45Interface
6BitRibbon
Cable PowerSupply
Port
This is the standard network interface, which is mainly
used for connecting the keyboard with the control matrix
over short distances (less than 7.6m). For more details
please see "2.3 matrix connection".
3
ALARMS
(1-9)
ALARMS
(1-18)
COM1(1-6)
COM2(7-12)
CONTROL
OUTPUTS
RJ45
RJ45
A+B-T+T-R+R-
RS422RS485 T
+
T
-
R
-
R
+
RemoteKeybard(S)
Pin1
Pin8
T+R+
T-R-
R+T+
R-T-
LocalKeyboard
PleaseinsertoneendofRJ45connection
lineintotheRj45interfaceofthekeyboard,and
inserttheotheroneintothe RJ45interface
(“
LOCALKEYBOARD
”）
ofCM6700matrix
2.2MatrixConnection
2.2.1RJ45LocalConnection
Rs422connectionline,oneendconnectswith
Rs422interfaceREMOTEKEYBOARD(s))of
CM6700backplate,theotherend connectswith
Rs422interface of thekeyboard,thekeyboardint-
erfaceRs422R+R-correspondswithmatrixin-
erfaceRs422T+T-,thekeyboardinterfaceRs
422T+T-correspondswithmatrixinterfaceRs
422R+R-.
（
（）
（）
（）
（）
2.2.2Rs422remoteconnection
1RJ45localconnection,thedistancebetween
thekeyboardandthematrixislessthan7.6m.
2、RJ45interfacehas12VAC, no other power
is needed when the keyboard connects to the
CM6700 matrix.
、
NOTICE
NOTICE
Rs422remoteconnection,themaximum
distancebetweenthekeyboardandthe
matrixis1200m.
Pin1
2
3
4
T+
T-
Pin5
6
7
8
NC
NC
R-
R+
RJ-45Limb
Powerinput
AC/DC9V-12V
CM6700Matrix
Keyboard2
Keyboard1
Picture2-2.1
Keyboard Matrix
9V-12VAC/DC
NONPOLAR
Connection
The keyboard can control the PELCO protocols
CM6700 & CM6800. For example the keyboard
connects with the PELCO CM6700 matrix in order to
introduce the connection between the keyboard and
the matrix.
There are two kinds of keyboard connection
interface on the CM6700 matrix back plate. One is
the local keyboard connection interface RJ45
("LOCAL KEYBOARD"), which can control the single
keyboard within the distance of 7.6m. The other is
the remote interface RS422 ("REMOTE
KEYBOARD(s)"), which can connect with the
keyboard's RS422 Iinterface. The maximum distance
is 1200m.
A+B-T+T-R+R-
RS422
RS485
A+B-
RS485
AC24V
4
2.3ConnectwithTheDomeDirectly
Dome
Keyboard
PowerAC/DC9V-12V
Picture2-3.1
Connection
You can connect to the PTZ camera/dome via the RS485
interface on the keyboard if you want to control it directly.
The RS485 interface of the PTZ camera/dome is on the
switchboard of the pendant hanger found on the upper
cover of the PTZ camera/dome. You will also find the 4
Pin control/power socket and also the RS485 A+ & B-
when you turn the metal button inside the hanger and
opened the switchboard.
There are different ways to connect to the PTZ camera/
domes depending on the make of them. Please see the
PTZ camera/dome's user manual for more information.
5
2.4TheConnectionofTheKeyboardin
TheSystem
Thekeyboardcontrolsthematrixandthencontrol
thedomesindirectlybythematrixseestothepicture
2.4-1Whenunconnectwiththematrix,thekeyboard
controlsthedomedirectly.
（
）
Keyboard Picture2.4-1 Dome1 Dome2
Picture2.4-2
Keyboard1
Keyboard3
Keyboard4
Keyboard2
Dome1 Dome2 Dome3 Dome4
Dome5 Dome6 Dome7 Dome8
Matrix
NOTICE
1.AlineofRs485maycontrolupto32main
controllingandundercontrollingequipments,
soakeyboardwhichcontrolsthedomedirectly
mayconnectupto31domes.
2.Thesystemmayconnectupto4keyboardsat
thesametime,andthefourkeyboardsIDare
different.
Connection
The keyboard and camera connects in parallel with the
RS485 Bus and each keyboard can control each dome. This
way is required because you need to have the keyboard's
(the main keyboard ID is set to '1') Baud rate set to 9600bps
(see picture 2-4-2).
6
CamID:001MonID:001
Protocol:Factory
Baudrate:9600bps
3.KeyboardOperationManual
LensControlling
LCD
Function
Numericzone
Joystick
3.1Electrifytokeyboard
NOTICE
1.whenthekeyboardisinitializing,thejoystick
musttoreturn0,cannottopullorrotatethe
joystick.
3.2LCD
Picture3-1.2
Picture3-1.1
Connection
This section of the manual explains how to operate the
actual keyboard. It needs to be noted that the
systematic platform of the keyboard compared to the
PTZ camera/dome may differ. Please refer to the PTZ
camera/dome's users guide to make sure that both
devices work together successfully.
The LCD display is used to list the keyboard's basic
operational information, which includes camera control,
monitor ID, baud rate, etc. In the last line it shows the
keyboard input commands and joystick operation. As the
image in Picture 3-1-1 shows, when you operate the
keyboard the LCD's backlight will turn on so you are able to
view the screen's information more clearly. The backlight
will switch off after 15 seconds of non use.
When power is provided to the keyboard, the keyboard
will auto-test the baud rate, protocol and the PTZ
cameras/domes (object monitor will be set as '1'). This
information will show on the LCD screen.
7
3Joystickcontrols the dome
●
●
3.Focuscontrol：
PressFARmanuallyfarfocus,tomakethe
farobjectmorelegible,leavetostop.
PressNEARmanuallynearfocus,tomake
thenearobjectmorelegible,leavetostop.
【】
●
【】
3.4Changeobjectdome
【】【】
【】，
，【】
N+Cam
Nmeansnumerickey
InputthedomeIDPressCam to changeobject
dome.
3.5Domelenscontrol
3.6.1Preset
SetpresetSET+N+Preset
CallpresetN+Preset
Nmeanspresetnumber.
：【】
：
●
●
【】【】
【】【】
【】
●Iriscontrol：
【】
【】
PressOPENmanualIrisincrease,Irisis
at the maximum,the screen will show white,leave
tostop.
PressCLOSEmanualIrisreduction,Irisis
at the minimum,thescreen willshowblack,leaveto
stop.
3.6Domefunctionoperation
3.6.3Pattern
Setpatternpath
Runpattern
：【】【】【】
【】【】【】
【】（）
【】
【】【】【
】
：【】【】
（）【】
SET+N+PATTERN
+Path+SET+0+PATTERN
PressSET,inputpatternNO.1-4,
PressPATTERNtoentertoursetup,the
dome recordsa seriesofmotions, whencomplete
pressSET,thenpress0,thenpressPAT-
TERN,thepatternsetupfinish.
N+PATTERNInputpattern
number1-4,pressPATTERN,runpattern.
●
●
●
【
【
Press TELE】
PressWIDE】
Zoomcontrol：
3.6.2Scan
Setleftlimit++
Setrightlimit+2+Scan
+Scan
Usershouldenterintomenusetuptochange
the speedofscan.
：【】【】【】
：【】【】【】
：【】【】
●
●
●
SET1Scan
SET
Runscan1
Connection
The Joystick has two functions, one is to manually
control the PTZ camera/dome's rotation, and the other
is to help control the set up of the object menu.
Rotate the joystick in any direction, the camera will
rotate in correspondence with the direction of the
joystick at the same time. The LCD will display the
information in the lower right corner as directional
arrows. They respectively show tilt up, tilt down, tilt right,
tilt left. If the joystick tilts to the upper right hand corner,
the image will display the relevant directional arrows.
When the joystick returns to the primary location, the
camera will stop rotating.
●
You can tilt the joystick up or down to scroll through
the system menu options. When you tilt it to the right
you will select that menu option or reserve the setting
after it has been set. Tilting it left will exit menu or stop
reserving the settings.
By moving the joystick more quickly the more the PTZ
camera/dome pan/tilts in parallel with the speed of
movement.
, the camera's lens will zoom in
to increase the image size by multiple amounts.
, the camera's lens will zoom
out to decrease the image size by multiple
amounts.
The standard setting for the camera is for it to be in
constant auto focus. The user must manually focus
and run other operations by the two keys, once this is
done the camera will automatically resume to auto
focus.
3.6.4Tour
RuntourN+TOUR/TOUR
PresstournumberpressTOURruntour.
Ifsystemhasonlyatour,pressTOURdirectly.
A settourmust be entered into the
setupmenu.
：【】【】【】
，【】，
【】
3.8.2Callmainmenuofmatrix
3.8.3Confirmafterprogram
ENTERafterthematrixprogrammed,
pressENTER,meansconfirmafterprogram,
foradetailed explanation,please
refertothematrix operation manual.
【】：
【】
3.7Callthedomemainmenu
9+5+Presetinput95,thenpress
Presettocallthemain menu ofobjectdome.
The menu isdisplayedintheobjectmonitor.
How to setthedomemenubykeyboard,
PleaserefertothedomeOperationmanual.
【】【】【】：
【】
3.8Controlthematrix
3.8.1Switchthedomesinorder
Thematrixconnectssixteendomes,andswitches
thedometopreviousandthenext dome.TheLCD
willdisplaynumber,dateand time.
PREV:switchtopreviousdome.Press
PressPREVtoholditfor2s,andjumpsixteen
domesoftheconnectionmatrixinpreviousorder.
PressStoptostoptoswitch.
NEXT:switchtonextdome.PressNEXT
toswitchthenextdomeinsinglestep;pressNEXT
toholditfor2s,andjumpthesixteendomesofthe
connectionmatrix.
Stop:switchcontinuously,pressStopto
stoptoswitch.
【】
【】
PREV,switchtopreviousdome in asinglestep；
【】
【】
【】【】
【】
【】【】
3.8.4Changeobjectmonitor
N+MON
InputthemonitorID,then pressM【ON】，the
imageandthemenuofthe dome thatyou control
bykeyboard willdisplayinthe objectmonitor.
【】【】
8
Connection
Calls the main menu. The
main menu will be displayed in the object monitor. If
you are unsure how to change settings in the matrix
menu please refer to the matrix's operation manual.
【Shift】+【Set】：
9
1Keyboardsetup
2Domesetup
3Protocolselect
4Exitmenu
、
、
、
、
1SetKBParameter
2Aboutkeyboard
、
、
Success！
Error!
1Keyboardsetup
2Domesetup
3Protocolselect
4Exitmenu
、
、
、
、
1SetKBID
2Setballdrate
3Joy_calibrate
、
、
、
InputKBID:
1-64（）
4TheKeyboardMenuControls
Press the numericalkey ormovethe
joystickupand downtotheoptionthatyou need
and thenmove it rightafterentering themain
menu,which can enter therelevantmenusetting.
Picture4.1-1
*
*
【】
SavingSetting
PressPrev,ormovethejoystickleftwards,
then retur n to the previousmenu.
ReturntoPreviousmenu
4.1KeyboardParameterSetting
4.1.1SetkeyboardID
1.Entermain menu,LCD display( See
picture4.1.1-1)
Picture4.1.1-1
5.
2.Press【1】thenchoosekeyboard
setting. LCD will display the following
(See the picture 4.1.1-2)
3.Press【1】tochoosekeyboard
Specification. LCD will display the following (See
picture 4.1.1-3)
Picture4.1.1-2
Picture4.1.1-3
NOTICE
ThefactorydefaultIDofthekeyboardis1;
TheIDNumbermustbe1ifthesinglekeyboard
works;Itcanconnectupto4keyboardwhen
workingonline,butmakesurethereisonlya
keyboardIDsetas1,otherwisealltheonline
keyboardscannotworknormally.
4.Press【1】tochoosekeyboardIDsetting.
LCD will display the following (See picture
4.1.1-4)
Picture4.1.1-4
Picture4.1.1-5
Picture4.1.1-6
KeyboardParameterSetting
, hold for 2 seconds. Go to the main
menu, the LCD will show the following in Picture 4.1-1.
Press【SET】
Choose the relevant numerical keys according to the
menu hint. You can the enter the relevant function
settings. Press【ENTER】to save settings; the LCD
will display "Success" after the set up is successfully
complete.
Press the relative numerical key (1-64); press
【ENTER】to confirm. The screen will display the
following (See picture 4.1.1-5). This means that the
operation has been completed successfully.
Press the 【PREV】button or move the joystick to
the left to go back through the menu stages
gradually.
The screen will show 'Error' if the inputted numerical
key is in excess of the ID scope (1-64). See picture
4.1.1-6.
10
Joystickisfreethen
PressEnter
Success！
Usercan enterintotheJoystickcalibration menu
andcalibratethejoystickwhenitcannotbecontrolled.
Thejoystickmustbe in its unmoved state
whenyoudoit.
2400bps
4800bps
9600bps
19200bps
Enterthemainmenu
Press2tocheckthekeyboardmessage
LCDdisplay(see picture4.1.4-1)
【】
Version:1.00
KBID:001
Protocol:Factory
Balldrate:9600bps
4.1.5Keyboardmessagedisplay
KeyboardParameterSetting
4.1.2Thekeyboardbaudratesetting
Entermenu(LCDdisplay - see picture
4.1.1-1)
Press【1】tosetthekeyboard
LCDdisplay(seespicture 4.1.1-2)
Press2tosetthekeyboard's baudrate.【】
LCDdisplay(See picture4.1.2-1)
Must use 9600BPSwhenconnectingwiththe
matrix;andmustuse 9600BPSor19200bps
whenconnectingthekeyboard online.
Thebaudrateisdividedinto2400bps,4800bps,
9600bpsand19200bps,usercanchoosebaudrate
accordingtotheapplicationandthenpressEnter
tosave.ThescreendisplayItmeansthe
operationis.ThenPressPrevormove
thejoystick to the left togoback.
success
success
【】
【】
Picture4.1.2-1
NOTICE
4.1.3JoystickCalibration
Picture4.1.3-1
Enterthemainmenu.
LCDdisplay. (see picture4.1.1-1)
Press
【1】
tochoosethekeyboardsetting.
LCDdisplay.(see picture4.1.1-3)
Press
【3】
toenterJoystickCalibration.
LCDdisplay(see picture4.1.3-1)
Picture4.1.3-2
Press
【】
vormove
Picture4.1.4-1
Thejoystickmustbeuntouched during
joystick calibration.
NOTICE
EnterintotheOSDmenu,LCDwilldisplayasPicture
4.1.1-1shows.
Press1tosetthekeyboard.
LCDwilldisplayasPicture4.1.1-2shows.
Press4tosetmulti-keyboardconnection
statesetting.AfteryouselectMultikeyboard
state,tiltup/downthejoysticktosetthestate
asorthedefaultsettingofkeyboard
【】
【】
【
】
“ON”“OFF”,
Inmulti-keyboardstatethebaudrate ofeach
keyboardshouldbesetas9600bps.
4.1.4Multi-keyboardConnectionstatesetting
NOTICE
Press 【ENTER】to finish the operation. The screen will
display the following (see picture 4.1.3-2)
is OFF. When it is set to ON, it can support multi-
keyboard operation, there will be no interference or
confusion between them. One group can support up to 4
keyboards when the Multi-keyboard setting is set. When
there is only one keyboard being used, the address
much be set as 1, or you will not be able to control the
keyboard.
Press 【PREV】or move the joystick to the left to
return. The keyboard message menu will display the
keyboard's parameter setting,the keyboard model, ID
address, the Keyboard protocol and the keyboard baud
rate.
11
Success！
1Setleftlimit
2Setrightlimit
3Runscan
、
、
、
Presetnum:
1-255（）
Presetnum:
1-255（）
Presetnum:
1-255
Pressprevtoback
（）
The first item is to save the setting dome
preset; the second item calls dome preset; the
third item clears the dome preset.
Choose 【1】 to enter preset setting,
this item requires inputting the preset
number that you want to save, the LCD will
display what is shown in Picture4.2.1-3
Afterentering thesettingdomepresetmenu,the
joystick willcontrolthedomedirectly. Input the
correspondingpresetnumber,thenpressEnter
tosave,LCDwillshow().Aspicture4.2.1-4
shows.
【】
Success
NOTICE
Afterenteringthecamera's presetmenu,the
joystickw illcontrolthecameradirectly,
atthis time the keys in the lens control
area also can control the camera lens,
the operation of the joystick andthe
keys are invalidforthedomeunder the
general menumode.
Inputcorrespondingpresetnumber,press
Entertocallpreset,LCDwillshow()
tiltthejoystickleftorpresstobacktothe
formermenu.
【】
【】
Success
Prev
Press3toentertheclearingpresetmenu,
AsLCDshows(Picture4.2.1-6)
【】
Inputthepresetnumberthatyouwanttoclear,
) and go backto theformermenu.
press【ENTER】 clearpreset,LCD willshow
(Success
Picture4.2.1-6
Picture4.2.1-5
Picture4.2.1-4
4.2.2Domescansetting
Enterthemenu,asLCDshows(picture4.1.1-1)
Presstoenterthedomesettingmenu,as
LCDshows(picture4.2.1-1)
Pressagaintoenterthedomescansetting
menu,asLCDshows(picture4.2.2-1)
【】
【】
2
2
Domescansetting includessettingdomeleftli-
mit,rightlimit andrunning scan.
Choose【1】to set dome left limit, as LCD
shows (Picture 4.2.2-2)
Picture4.2.1-3
Picture4.2.2-1
KeyboardParameterSetting
4.2Domesetting
1Setdomepreset
2Setdomescan
3Setdomepattern
4Setdometour
、
、
、
、
1Savepreset
2Showpreset
3Clearpreset
、
、
、
4.2.1Domepresetsetting
Enterthemainmenu,asLCDshows the
following (Picture 4.1.1-1)
Press
【2】
toenterdo mesettingmenu,as
LCD shows the following (Picture4.2.1-1);
move joystick up and down to separately set
the dome preset, scan, pattern and tour.
Press
【1】
to enter dome preset setting,
as LCD shows in (Picture4.2.1-1).
Picture4.2.1-1
Picture4.2.1-2
You will need to refer to the matrix and PTZ
camera/dome manuals to help complete the
setup using the keyboard. Some parameters to
be set my differ depending on the camera/dome
used.
Press 【PREV】to go back to the former menu.
Press '2' to enter the calling preset menu, the LCD will
display the following as shown in Picture 4.2.1-5.
12
1Tournum:
2Insertpreset
3Runtour
、＿
、
、
Picture4.2.3-2
Press1tostart
Pressprevtoback
Press0tostop
Afterenteringthe menu,the system requires you
toinput the pattern tourthatyousetin the first
item,the inputrangeis1-4,press 【Enter】 to
confirm,thecursorwillauto-jump to the second
item. To start setting a pattern (if user has
finishedtosetpattern already you can jump over this
item) choose 【3】to run pattern directly.
Patternsetting:afterentering thepatternmenu,
tomove thedome in anappropriateposition,press
tostarttorecordpatterntour.LCDwillshow
()aspicture4.2.3-2shows.Start......
【】1
Press(0)tostoprecordingpattern,LCDwillshow
()and will go backtotheformermenu,
it means the operation was successful.
Success
NOTICE
Afterenteringthesettingcamerapattern
menu, the joystick will control the dome
directly,at thistime the keys in lens
controllingareaalso cancontrolthedome
lens,theoperationofthe joystickandthekey
isinvalidforthedomeundergeneralmenu
mode.
Presstoenterdomesettingmenu,asLCD
shows(picture4.2.1-1)
ThenPress4toenterthemenuoftour,as
LCDshows(picture 4.2.4-1)
【】
【】
2
4.2.4Toursetting
Afterenteringthemenu,thesystemrequires you
toinput the tourthatyouwillsetin the first item ,the
input rangeis 1-6, press【Enter】 to confirm, the
cursorwill auto-jumptothesecondrow tostarttour
setting,if userhasfinishedto settour already, you
can jump overthe seconditem torunthe tour
directly, the LCD will show'Success' andbackto
the formermenu, itmeanstheoperation is
successful.
Choose the second item (as picture 4.2.4-2
shows) to inputpresetsthatyouneedtoinsertin
atour. Inputting apreset speed inthesecond item:
Input range is between 1-127. Input the preset
park timeinthe thirditem:input range between 1-255
Press 【Enter】 to confirm,LCD willshow
Success and will go back to the former
menu, it means the operation of adding preset is
successful.
Picture4.2.4-1
1Presetnum:
2speed:
3dwell:
、＿
、
、
Press3toruntour.【】
Picture4.2.4-2
KeyboardParameterSetting
NOTICE
Itisvalidtoinsertthepresetsintourunder
theVIDO-B02protocolbutitisinvalid
under otherprotocols.
Pressentersure
Pressprevtoback
1Patternnum:
2Setpattern
3Runpattern
、＿
、
、
Afterenteringthe settingdomelimitmenu,to
movethe dome in anappropriateposition,then
pressEntertosave,LCDwillshow()
and will go back to the former menu.
【】 Success
Choose the second item (Setrightlimit), it is
the same operationwhen setting leftlimit.
Backtoscanmenu,thenpress3torunscan.【】
Afterenteringthecameralimit setup
menu,the joystick willcontrol the camera
directly, atthis time the keys in the
lens control area can alsocontrol the
camera lens, the operation of the
joystick and the keys are invalid for
the cameraunder the general menu.
NOTICE
4.2.3Patternsetting
Enterthemenu,asLCDshows(picture4.1.1-1)
Press2toenterthedomesettingmenu,as
LCDshows(Picture4.2.1-1)
ThenPress3toenterthepatternsetting
menu,asLCDshows(picture4.2.3-1)
【】
【】
Picture4.2.2-2
Picture4.2.3-1
4.3Protocolsetting
Enterthemenu,LCD displays as shown in
picture 4.1.1-1.
Press【3】toenterprotocolsetting,asLCD
showsin picture4.3-1.
4.3.1Pelcomatrixmode
Press1toenterPELCOmatrixmode
As LCD shows in picture4.3.1-1)
Presstochooseprotocoland go backto
theformermenu.
【】
【】Enter
4.3.2Domecontrollingmode
Choose2toenter thePTZ camera/dome
direct control mode, as LCD shows in picture
4.3.2-1.
Choosecorrespondingprotocolaccording to what
the camera uses,thesystemwill go backtothe
former menu automatically after deciding the
protocol.
【】
4.4Exittokeyboardmenu
Enterthemenu,asLCDshowsin picture
4.2.1-1) Press 【4】toexitthemenu
directly.
1Matrix
2Dome
、
、
Picture4.3-1
1Pelcomatrix、
Picture4.3.1-1
1Factoryprotocol
2Pelco-pprotocol
3Pelco-dprotocol
4VIDO-B02
、
、
、
、
Picture4.3.2-1
KeyboardParameterSetting
13
*Connectionandterminalresistance
TheRS485standardsrequireadaisychain
connectionbetweentheequipment.There must
beterminationresistance with120
Ω
atboth
endsoftheconnection (refertopicture 4-1.1).
Please refertopicture 4-1.2 forsimple
connection. And
“D”
shouldnot
exceed7m.
5.1RS485BusBasicKnowledge
2400bps
4800bps
9600bps
1800m
1200m
800m
BaudRate
MaximumDistance
19200bps
600m
Picture4-1.1
120Ω
1#2#3#4#32#
120Ω
Picture4-1.2
120Ω
1#2#3#4#32#
D
A+
B-
A+ B-
120Ω
Picture4-1.3
1#
32#
15#
6#
MainControllor
120Ω
120Ω
Appendix
*Problemsinpracticaluse
If the user adopts astarconfiguration during
practical connection the termination resistors must be
connected tothe two bits of equipment that are
the farthest awayfrom each other, such as
equipment 1# and 15# (refertopicture4-1.3).
Otherwise you may experience signal
reflection and loss of signal transmission the
further away the equipment are. Thisconnection
way not be in accordance with the
requirements of RS485 standards in this
installation method. If you have the
equipment too far away you will not be
able to controlthedome or continuously operate
byitself.
ThefactorywillrecommendtheRS485distributor.The
distributorcantransferthestarconfiguration
connection tothe mode ofconnection accordance
withtheRS485standards.Thenewconnection
achieves reliable data transmission and avoids the
problem.(referto picture4-1.4)
Rs485Distributor
B-
1#
2#
3#
120Ω
120Ω
120Ω
A+
Picture4-1.4
*CharacteristicofRS485Busline
Accordingto RS485standards, RS485 Bus
consists of half-duplexeddata transmission
cableswith characteristic impedance of
120Ω.The maximum load capacity is32unit
loads (includingmain controller andcontroller
equipment)
*Transmission distanceofRS485 Busline
Whenuserselectsthe0.56mm (24AWG) twisted
pair as data transmission cable, the maximum
theoretical transmitting distances are shown
below according to different baud rate:
Ifuserselectsthinnercables, orinstallsthecamera
inanenvironmentwith a strong electromagnetic
interference, orconnectslots ofequipmenttothe
RS485 Bus, themaximum transmitting distance
will bedecreased.To increasethe maximum
transmitting distance , dothe contrary.
14
Shortcut
【】【】N+Cam
【】【】N+MON
【】eleT
【】Wide
【】Far
【】Near
【】Close
【】Open
【】Set+N+Preset【】【】
【】【】N+Preset
【】【】【】SET+1+Scan
【】【】【】2SET++Scan
【】】Set+N+Pattern【】【
【】【N+Pattern】
【】【】【】N+Tour/Tour
【】【】【】9+5+Preset
Operationobject
Highspeeddome
Monitor
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Highspeeddome
Function
InputDomeID,pressCamtoselectobjectdome.【】
PressWide,reducethemultipleoflens【】
PressFar,farfocus【】
PressNear,nearfocus【】
PressClose,reducttheIris【】
PressOpen,increasethIris【】
Adjusttheimagetoobjectposition,pressSettoinput
presetNumber,thenpressPresettosetpreset.
【】
【】
Inputpreset,presstocallthepreset.【】Number Preset
Inputtournumber,pressTourordirectlypressTour
toruncruise. 【】【】
Input95tocallmainmenuofdome
PressTele,increasethemultipleoflens【】
【】
Shift+Set
【】 Matrix
Highspeeddome
InputmonitorNumber,pressCamtoselectobjectmonitor.【】
【】【】1+Scan
Adjusttheimagetoobjectposition,pressSettoinput1,
thenpressScantosetscanleftlimit. 【】
【】
Adjusttheimagetoobjectposition,pressSettoinput2,
thenpressScantosetscanrightlimit.【】
【】
Input1,pressScantorunscan.【】
PressSettoinputpatternnumber,pressPatternto
recordpatternpath.
【】 【】
PressSet,input0,thenpressPatterntosavepattern【】 【】
Inputpatternnumber(1-4),pressPatterntorunpattern.【】
【】Next Matrix Switchtonextdome.PressNexttojumpthenextdome,
pressNexttoholditfor2s
【】
【】，continuouslyswitchthe
sixteendomesofconnectionmatrixbackwards.
【】Prev Matrix Switchtopreviousdome.PressPrevtojumpthe
previousdome,pressPrevtoholditfor2scon-
tinuouslyswitchthesixteendomesofconnection
matrixforwards.
【】
【】，
PressShiftandSettocallmainmenuofmatrix【】【】
【】Stop Matrix Stoptoswitch.
【】Enter Matrix Afterprogram,pressEntertoconfirm.【】
Working
Mode
DirectControl
Modeand
PELCOMatrix
Mode
PELCOMatrix
Mode
5.2Keyboardshortcutoperationmanual
【】】Set+0+Pattern【】【
Appendix
/
