Dell Data Guardian User guide
- Category
- Antivirus security software
- Type
- User guide
This manual is also suitable for
Dell Security Management Server
Technical Advisories v11.0.1
June 2021
Rev. A01
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Chapter 1: Dell Security Management Server Technical Advisories................................................ 6
Contact Dell ProSupport....................................................................................................................................................6
New Features and Functionality v11.0.1......................................................................................................................... 6
Technical Advisories v11.0.1...............................................................................................................................................6
Resolved Technical Advisories v11.0.1............................................................................................................................ 6
New Features and Functionality v11.0.0.........................................................................................................................7
Resolved Technical Advisories v11.0.0............................................................................................................................7
Technical Advisories v11.0.0.............................................................................................................................................. 7
New Features and Functionality v10.2.14.......................................................................................................................7
Resolved Technical Advisories v10.2.14..........................................................................................................................7
Technical Advisories v10.2.14............................................................................................................................................8
New Features and Functionality v10.2.13...................................................................................................................... 8
Resolved Technical Advisories v10.2.13......................................................................................................................... 8
Technical Advisories v10.2.13............................................................................................................................................9
New Features and Functionality v10.2.12...................................................................................................................... 9
Technical Advisories v10.2.12............................................................................................................................................9
Resolved Technical Advisories v10.2.12......................................................................................................................... 9
New Features and Functionality v10.2.11..................................................................................................................... 10
Resolved Technical Advisories v10.2.11.........................................................................................................................10
Technical Advisories v10.2.11............................................................................................................................................11
New Features and Functionality v10.2.10.....................................................................................................................12
Resolved Technical Advisories v10.2.10........................................................................................................................13
Technical Advisories v10.2.10..........................................................................................................................................13
New Features and Functionality v10.2.9...................................................................................................................... 14
Resolved Technical Advisories v10.2.9......................................................................................................................... 14
Technical Advisories v10.2.9........................................................................................................................................... 15
New Features and Functionality v10.2.7...................................................................................................................... 15
Resolved Technical Advisories v10.2.7..........................................................................................................................16
Technical Advisories v10.2.7............................................................................................................................................16
New Features and Functionality v10.2.6...................................................................................................................... 16
Resolved Technical Advisories v10.2.6..........................................................................................................................17
Technical Advisories v10.2.6............................................................................................................................................17
New Features and Functionality v10.2.5...................................................................................................................... 17
Resolved Technical Advisories v10.2.5..........................................................................................................................17
Technical Advisories v10.2.5............................................................................................................................................17
New Features and Functionality v10.2.4...................................................................................................................... 18
Resolved Technical Advisories v10.2.4......................................................................................................................... 18
Technical Advisories v10.2.4............................................................................................................................................18
New Features and Functionality v10.2.3...................................................................................................................... 18
Resolved Technical Advisories v10.2.3......................................................................................................................... 19
Technical Advisories v10.2.3............................................................................................................................................19
New Features and Functionality v10.2.2...................................................................................................................... 19
Resolved Technical Advisories v10.2.2......................................................................................................................... 19
Technical Advisories v10.2.2............................................................................................................................................19
New Features and Functionality v10.2.1....................................................................................................................... 19
Contents
Contents 3
Resolved Technical Advisories v10.2.1.......................................................................................................................... 19
Technical Advisories v10.2.1........................................................................................................................................... 20
New Features and Functionality v10.1..........................................................................................................................20
Resolved Technical Advisories v10.1.............................................................................................................................20
Technical Advisories v10.1............................................................................................................................................... 20
New Features and Functionality v10.0..........................................................................................................................21
Resolved Technical Advisories v10.0.............................................................................................................................21
Technical Advisories v10.0...............................................................................................................................................21
New Features and Functionality v9.11...........................................................................................................................21
Resolved Technical Advisories v9.11..............................................................................................................................21
Technical Advisories v9.11............................................................................................................................................... 22
New Features and Functionality v9.10......................................................................................................................... 22
Resolved Technical Advisories v9.10............................................................................................................................ 22
Technical Advisories v9.10.............................................................................................................................................. 22
New Features and Functionality v9.9...........................................................................................................................23
Resolved Technical Advisories v9.9..............................................................................................................................23
Technical Advisories v9.9................................................................................................................................................24
New Features and Functionality v9.8...........................................................................................................................24
Resolved Technical Advisories v9.8..............................................................................................................................24
Technical Advisories v9.8................................................................................................................................................26
New Features and Functionality v9.7........................................................................................................................... 27
Resolved Technical Advisories v9.7.............................................................................................................................. 27
Technical Advisories v9.7................................................................................................................................................ 28
New Features and Functionality v9.6...........................................................................................................................29
Resolved Technical Advisories v9.6..............................................................................................................................29
Technical Advisories v9.6................................................................................................................................................29
New Features and Functionality v9.5.......................................................................................................................... 30
Resolved Technical Advisories v9.5..............................................................................................................................30
Technical Advisories v9.5.................................................................................................................................................31
New Features and Functionality v9.4.1.6..................................................................................................................... 31
New Features and Functionality v9.4.1.........................................................................................................................31
Resolved Technical Advisories v9.4.1............................................................................................................................31
New Features and Functionality v9.4...........................................................................................................................32
Resolved Technical Advisories v9.4..............................................................................................................................32
Technical Advisories v9.4................................................................................................................................................ 33
New Features and Functionality v9.2...........................................................................................................................33
Resolved Technical Advisories v9.2..............................................................................................................................34
Technical Advisories v9.2................................................................................................................................................ 34
New Features and Functionality v9.1.5........................................................................................................................35
Resolved Technical Advisories v9.1.5...........................................................................................................................35
Technical Advisories v9.1.5............................................................................................................................................. 36
New Features and Functionality v9.1........................................................................................................................... 36
Resolved Technical Advisories v9.1.............................................................................................................................. 36
Technical Advisories v9.1.................................................................................................................................................37
New Features and Functionality v9.0...........................................................................................................................37
Resolved Technical Advisories v9.0..............................................................................................................................37
Technical Advisories v9.0................................................................................................................................................38
Resolved Technical Advisories v8.5.1........................................................................................................................... 38
Technical Advisories v8.5.1............................................................................................................................................. 38
New Features and Functionality v8.5...........................................................................................................................39
4
Contents
Resolved Technical Advisories v8.5..............................................................................................................................39
New Features and Functionality v8.3.1........................................................................................................................39
Resolved Technical Advisories v8.3.1........................................................................................................................... 40
New Features and Functionality v8.3...........................................................................................................................40
Resolved Technical Advisories v8.3..............................................................................................................................40
Technical Advisories v8.3.................................................................................................................................................41
New Features and Functionality v8.1............................................................................................................................ 41
Resolved Technical Advisories v8.1............................................................................................................................... 41
Technical Advisories v8.1................................................................................................................................................. 41
New Features and Functionality v8.0........................................................................................................................... 41
Resolved Technical Advisories v8.0..............................................................................................................................42
Resolved Technical Advisories v7.7.2...........................................................................................................................42
Technical Advisories v7.7.2............................................................................................................................................. 42
New Features and Functionality v7.7.1........................................................................................................................ 42
Resolved Technical Advisories v7.7.1............................................................................................................................42
Technical Advisories v7.7.1..............................................................................................................................................42
New Features and Functionality v7.7........................................................................................................................... 43
Technical Advisories v7.2.3.............................................................................................................................................43
Technical Advisories v7.2.1............................................................................................................................................. 43
Technical Advisories v7.2................................................................................................................................................ 43
Technical Advisories v7.0/7.0.1..................................................................................................................................... 43
Chapter 2: Default Policy Changes.............................................................................................. 44
Contents
5
Dell Security Management Server Technical
Advisories
Contact Dell ProSupport
Call 877-459-7304, extension 4310039 for 24x7 phone support for your Dell product.
Additionally, online support for Dell products is available at dell.com/support. Online support includes drivers, manuals, technical
advisories, FAQs, and emerging issues.
Be sure to help us quickly connect you to the right technical expert by having your Service Tag or Express Service Code
available when you call.
For phone numbers outside of the United States, see Dell ProSupport International Phone Numbers.
New Features and Functionality v11.0.1
● For Passwordless Authentication and information about configuring Dell Encryption Enterprise to authenticate with Windows
Hello, see KB article 188216.
Management Console
● In Populations > User Groups, after clicking a group name and selecting the Members tab, the administrator can now
click an Export File button to export the list of members within a User Group. This option allows the administrator to
cross-compare and then leverage that to build a list for an admin-defined user group. This export option provides details
under User, Distinguished Name, and Common Name columns.
● In Populations > Endpoint Groups, after clicking a group name and selecting the Members tab, the administrator can now
click an Export File button to export the list of endpoints within that endpoint group. This option allows the administrator
to cross-compare against other utilities, build additional admin-defined user groups, and export lists of endpoints to a
third-party systems management utility like SCCM. The export provides data in the Category (OS Type), Hostname, and
OS/Version columns.
● In the Dashboard > Endpoint Protection Status screen, to facilitate identifying protection gaps, the administrator can
now select an option and click an Export File button. This option exports the list of endpoints that are present within
the Protected, Not Protected, or Total listing of endpoints. Data displays in the Platform, Endpoint ID, Protected Status
(Yes/No), Shield Inventory Received, Shield Inventory Processed, Agent Inventory Received, and Agent Inventory Processed
columns.
Technical Advisories v11.0.1
● No technical advisories exist.
Resolved Technical Advisories v11.0.1
● No resolved technical advisories exist.
Resolved Security Advisories v11.0.1
● The PostgreSQL version has been updated to 11.12, resolving several security vulnerabilities, including CVE-2019-10164.
[DDPS-10148]
1
6 Dell Security Management Server Technical Advisories
New Features and Functionality v11.0.0
● New Passwordless authentication for the users who are using Windows Hello Authentication. In the Management Console >
Domains > Domain Settings, additional fields provide configuration for ADFS or Microsoft Azure. [DDPS-9969, 10067]
● Server code migration to Visual Studio 2019.
Resolved Technical Advisories v11.0.0
● An issue is resolved with an HTTP option method not being properly set, that had resulted in false-positives within
vulnerability scanners when the Server was scanned. [DDPSUS-2944]
● The Portuguese documentation now displays properly in the Help menu. [DDPS-9960]
● Modified language to move to a more inclusive syntax. [DDPS-10031]
● Copyrights have been properly updated to 2021 for the Server. [DDPS-10060]
● IPv6 address approvals are now being properly retained for the Denial-of-Service filter. [DDPS-10133]
● Management Console:
○ The Device Detail report export was failing due to DoS filter thresholds. This issue has been resolved. [DDPS-10050]
○ Several performance improvements have been implemented for Searches within the Management Console.
[DDPS-10065]
○ BitLocker keys are now properly populating by default. [DDPS-10085]
○ In Services Management > Events Management tab, an Enable Threat Events checkbox ensures that the Threat Events
tab displays in Populations > Enterprise or Populations > Endpoints > Details & Actions tab > Endpoint Detail. Under the
Threat Events tab, Web Protection and Client Firewall are listed under the Threat Prevention group. [DDPS-10095]
○ An issue is resolved so that when attempting to load an existing domain within the Dell Security Management Server
running 11.0.0, the existing domain no longer fails to load. [DDPS-10114]
○ The Domain Settings page now properly reflects the appropriate LDAP connection URL when Secure LDAP (LDAPs) is in
use. [DDPS-10117]
Resolved Security Advisories v11.0.0
● No security advisories exist.
Technical Advisories v11.0.0
● No technical advisories exist.
New Features and Functionality v10.2.14
● With a global shift to inclusive language, several terms and expressions have been updated.
● Lengthy lists of policies within policy groups have been restructured to improve readability and access. [DDPS-9667]
● For the Dell Data Security - Self-Service Recovery Portal tool's Recovery ID field, a dialog displays with Invalid Recovery Id if
an administrator enters a space or any special characters apart from underscore or hyphen.
Resolved Technical Advisories v10.2.14
● For the Recovery Portal, an issue is resolved where the portal automatically logs out when an administrator enters a space
or any special characters apart from underscore or hyphen in the Recovery ID field and then clicks Get Recovery Password.
[DDPS-9968]
● Management Console:
○ Administrators can now enter custom ports with Client Firewall policies. [DDPS-9779]
○ Importing devices into an Admin-Defined Endpoint Group is no longer case sensitive. [DDPS-9967]
○ A display issue has been resolved so that the LDAPs notation now properly updates the Directory URL in the Domain
Settings tab to display LDAPS when a Secure LDAP connection is being leveraged. [DDPS-9984]
Dell Security Management Server Technical Advisories
7
○ For Managed Reports, users no longer receive duplicate scheduled report emails when multiple recipients are defined.
[DDPS-10015]
● Recovery Portal
○ The Log Analyzer now displays logins through the Recovery Portal separately from logins to the Management Console.
[DDPS-9941]
Resolved Security Advisories v10.2.14
● No security advisories exist.
Technical Advisories v10.2.14
● When logging in to the Self-Service Recovery Portal with a SAM-Account name (domain\user), an error displays. The
workaround is to log in with the UPN (user@domain.com). [DDPS-9974]
● Currently, when a BitLocker Recovery is performed in the Management Console, braces are automatically set in the
Recovery ID field. A dialog states Invalid Recovery ID. The workaround is to remove the braces from the GUID in the
Recovery ID field. [DDPS-10085]
New Features and Functionality v10.2.13
● A web-based portal, the Dell Data Security - Self-Service Recovery Portal tool that is hosted by the Dell Security
Management Server, allows administrators with specific roles to recover devices that are managed by BitLocker. Roles
include Self-Service Recovery, System, Security, and Help Desk administrators.
Resolved Technical Advisories v10.2.13
● In the Security Server, SSOS activation is no longer failing for v 10.2.11 and later. [DDPS-9843]
● An issue has been resolved so that the Server Configuration Tool is now updating service configuration files and the files are
properly signed. [DDPS-9904]
● Management Console:
○ Null Pointer Exception handling has resolved an issue where a blank search or search for a specific device returns NaN
for the number of endpoints. Now, information displays. [DDPS-9769, DDPS-9910]
○ An issue has been resolved for a user in a User Group with the role of Report Administrator, Report Owner, and Report
User. After logging in, the user with those roles can now view the Dashboard. [DDPS-9773]
○ On an Endpoint Detail page > Users tab, the User, Last Successful Login, and Last Unsuccessful Login columns can now
be sorted. [DDPS-9819]
○ On the Recover Data page in the TPM > Hostname field, an issue is resolved. If an administrator enters a space only, the
buttons are not enabled. [DDPS-9829]
○ For email configuration, support was added for Anonymous Auth and an issue was resolved related to TLS-enabled
authentication. Now, sending email, notifications, and periodic reports works as expected. [DDPS-9832]
○ In Populations > Users, the sorting arrow in the Last Reconciled column now displays. [DDPS-9833]
○ An issue has been resolved so that Notification Summary email messages now link to the Management Console.
[DDPS-9908]
○ An issue has been resolved so that, after an upgrade, the Endpoints page now lists the endpoints. [DDPS-9910]
○ On the Domain Settings tab, an issue has been resolved so that if the administrator selects the Secure LDAP check box
and saves changes to the domain settings, no internal error displays. [DDPS-9911]
○ An issue has been resolved so that the Shield Detail page in Manage Reports can filter and data is returned. [DDPS-9915]
○ An issue has been resolved so that the Device Detail report can be exported. [DDPS-9983]
Resolved Security Advisories v10.2.13
● No security advisories exist.
8
Dell Security Management Server Technical Advisories
Technical Advisories v10.2.13
● Management Console:
○ Currently, when the administrator performs a mass import to an administrator-defined Endpoint Group and case does not
match exactly, the import fails. [DDPS-9967, DDPSUS-2891]
● Recovery Portal:
○ Currently, if an administrator copies the logged-in URL of the Recovery Portal and pastes it in another browser, the
administrator is not prompted to log in again. [DDPS-9961]
○ Currently, if logging in on same the browser as superadmin to the Management Console and then on a separate tab
to the Recovery Portal, an Access Denied dialog displays. The work around is to log out and then log in on separate
browsers or to log in first to the Recovery Portal. [DDPS-9965]
New Features and Functionality v10.2.12
● Cryptographic Next Generation certificates are now supported.
● For customers who have purchased VMware Carbon Black and Dell Encryption per-device from Dell, support is now available
for on-the-box entitlements.
● This functionality applies to the Management Console:
○ The legacy management console has been deprecated. The legacy login and corresponding URLs are no longer available.
○ Microsoft Edge (Chromium) is supported.
○ For newly deployed Security Management Servers, the Sync Users at PBA Activation policy in the Pre-Boot
Authentication policy group is now enabled by default to sync all active user accounts to the PBA during activation.
This helps to ensure that users can log in after PBA activation and reduces occurrences where users must perform a
manual recovery.
○ In Windows Encryption > BitLocker Encryption, the Disable BitLocker on Self-Encrypting Drives policy has been renamed
to Block BitLocker when other Dell Encryption technologies are present, and the hover text has been clarified.
○ The Device Detail report in Reporting > Manage Reports > Create New Report > Device Detail, contains a new column
titled Enabled Technologies.
Technical Advisories v10.2.12
● Currently, Server Encryption devices may fail to activate after a Server is upgraded to 10.2.11 or later. Existing devices
remain encrypted. [DDPSUS-2839, DDPS-9843, DDPC-12115]
Resolved Technical Advisories v10.2.12
● Management Console:
○ On the Endpoint Detail page > Details & Actions tab, the States section now displays only the disks present in the
last inventory that is received from the endpoint. Historical data regarding disks is retained but no longer displays.
[DDPS-4239]
○
○ On the Endpoint Detail page > Details & Action tab > Plugins & Agent section > Endpoints Plugin column, a hover text
description has been added for each Plugins & Agents column value. [DDPS-5580]
○ In Endpoint Detail > Details & Action > Plugins & Agent, only those plugins from the last check-in on the endpoint display.
The plugins displayed change when the plugin's state is changed from any State (Active, Available) to Not Present or
the reverse. [DDPS-7421]
○ In Management > Services Management > Events Management, when enabling the Export to Local File check box under
Export Events to a SIEM System, the administrator must now enter an absolute path in the File Location field in order to
save preferences. [DDPS-9616]
○ With SQL authentication, when modifying the database settings in the Server Configuration Tool, the database password
is now written to disk in encrypted form rather than in cleartext. Previously the database password was encrypted once
the services started. [DDPS-9627]
○ The Security administrator now has access to the Log Analyzer. [DDPS-9701]
Dell Security Management Server Technical Advisories
9
○ An issue has been resolved where, after an update, notification email messages would not properly send if ALL was
selected for the TYPE and PRIORITY, resulting in an incorrectly NULL filter field. This field is now be properly handled,
and the notification is sent. [DDPS-9725]
○ An issue where the Manage Report's Shield Detail report would time out with a large number of endpoints and when
pulling during peak hours has been resolved. [DDPS-9727]
○ An issue has been resolved so that if a Server is encrypted and a sweep has completed, the Protected Status and Date
display in the Management Console. [DDPS-9757]
○ An issue has been resolved where administrators in roles with insufficient access to see the Management > Recover
Endpoint page will no longer be able to click the link then get logged out. The link only displays to administrators whose
roles include recovering endpoints. [DDPS-9772]
○ On the Endpoint Details > Details & Actions page, sorting is now working in the Server Device Control section of
applicable endpoints. [DDPS-9800]
○ In Populations > User Groups > Edit Priority > Modify User Groups Priority Page, sorting the priority column is now
disabled, which is the previous behavior. [DDPS-9802]
○ An issue has been resolved where, in rare situations, Threat Protection licenses were consumed when Advanced Threat
Prevention was also installed. [DDPS-9808, DDPSUS-2816, DDPSUS-2590]
Resolved Security Advisories v10.2.12
● No security advisories exist.
New Features and Functionality v10.2.11
● SQL Server 2019 is now supported.
● Microsoft Edge is now supported.
● The Security Management Server may have issues with UI elements for Internet Explorer 11. Due to the lack of support for
modern web engines, Internet Explorer 11 will no longer be supported.
● The Security Management Server is compatible with the Microsoft requirement for LDAP channel binding and LDAP signing
when Active Directory is in use.
To enable this requirement on the Security Management Server, you must have the root issuing certificate for the domain
controller certificates that are imported into the "Trusted Root" store within the Microsoft Certificate Key Store.
● Licenses purchased on-the-box can now be bulk-inserted with a .csv file. To obtain this file, contact your Dell Security sales
representative or Dell Security support.
● The Security Server service now automatically adds the Server local IP addresses to ipWhitelist on service startup.
● Management Console:
○ For Management > Commit Policies, the embedded help now also includes content for View Pending Commit(s).
○ On the Endpoints page, the PBE and Manager columns are no longer included as part of the endpoint information. An
Enabled Technologies column now displays all the plugins that are enabled on the endpoint.
○ The EMS Device Whitelist field now accepts a maximum of 150 characters per line and 500 lines.
Resolved Technical Advisories v10.2.11
● The Encryption recovery file that is downloaded from the Security Management Server is no longer wrapped inside an
executable file and does not require running a command to extract it. [DDPS-5054]
● The APNS (Apple Push Notification Server) database tables, which are used for iOS device support, have been removed.
[DDPS-9453]
● The MDM (mobile device support) database tables have been removed. [DDPS-9454]
● When sending an email through JavaMail in the Management Console > Notification Management page, the Console
sends the email as anonymous. Updating to the latest version of JavaMail resolved the issue. [DDPS-9494]
● The password used when downloading an endpoint recovery bundle is no longer written in cleartext in output.log file from
the Security Server logs when in debug mode. [DDPS-9541]
● In the Management Console > Notification Management page, the Send Test Email dialog now displays the correct
information. [DDPS-9542]
● Due to product deprecation, the cloud-profile-updater. properties file has been removed from '/opt/dell/
server/security-server/conf' and '/opt/dell/server/security-server/bin'. [DDPS-9544]
10
Dell Security Management Server Technical Advisories
● In the Management Console > User Groups, when an administrator tries to grant to a group a higher administrator role
than the administrator account itself possesses, an Access Denied message displays rather than an Internal Error message.
[DDPS-9548]
● When updating a Security Management Server's certificate using the Advanced Configuration > Server Certificates
> Create and Install Self-Signed Certificate option, the system updates the signingcertificate table as expected.
[DDPS-9549]
● If the Management Console times out and cannot connect to the Security Management Server, a more descriptive
Connection Refused dialog now displays. Clicking OK redirects the user to the login page. [DDPS-9557]
● In the Security Management Server > DMZ Server Support field, the Host Name field now accepts any valid FQDN or
hostname including those that begin with a number. [DDPS-9561, DDPS-9561]
● Threat Events are now sortable within an individual Endpoint. [DDPS-9568]
● Selecting the option to Bypass for an Endpoint Group now appropriately displays a confirmation dialog. [DDPS-9596]
● An issue where the Effective Policy for an Endpoint or a User would not properly update has been resolved. [DDPS-9621]
● An issue where the Encryption Failure View was not loading within the Security Management Server has been resolved.
[DDPS-9622]
● Administrators with the Security Administrator role can now properly Remove and Add Endpoints to Groups within the
Security Management Server. [DDPS-9626]
● The Threat Protection Status widget on the Dashboard now properly displays the color indicator per Threat Category.
[DDPS-9634]
● The Device ID now links to the endpoint within the Threat Events tab. [DDPS-9640]
● When connecting to the Cylance server in the Management Console > Advanced Threats tab, a wait message no longer
displays. [DDPS-9650]
● In the Management Console > Management > Services Management > Events Management, an issue has been
resolved where the Security Server logs displayed recent events but would not export events when an unexpectedly older
event was discovered. [DDPS-9662]
● Administrators with the Help Desk role can no longer remove endpoints that are presented within an endpoint's Details and
Actions tab. [DDPS-9698]
● Advanced Threat Events once again can search by hostname or SHA256 hash. [DDPS-9710]
Resolved Security Advisories v10.2.11
● Several Java-based vulnerabilities have been resolved. [DDPS-9101, DDPS-9332]
Updates are to these versions:
○ Java Version: 1.8.0.241
○ Jetty Version: 9.4.25
●
Technical Advisories v10.2.11
● In the Management Console, if endpoints display without Serial Number, the administrator must set the following:
○ UseBiosSerialNumber entries within the InventoryObjects.config (in Core Server for Encryption Enterprise; in Core
Server and Inventory Server for Virtual Edition)
○ DeviceInventoryQueueProcessor
○ AgentInventoryQueueProcess
The client and the agent must then update to use the AssetTag field instead of the Serial field that is stored in
DeviceData:UseBiosSerialNumber entries. [DDPS-9619]
● Log Analyzer does not have the ability to filter using a start and end time. [DDPS-9637]
● Report emails scheduled through the Management Console > Reporting > Manage Reports feature do not localize the
email subject properly for Japanese and Korean languages. [DDPS-9643]
● Currently, the Uncommitted Policy Changes notification displays to administrators whose roles do not have permission
to commit policy. If they try to commit the outstanding policies, these administrators are logged out of the Management
Console. [DDPS-9702]
● In the Management Console, MDM databases have been removed. Therefore, the Endpoints page lists an error: Exception
thrown in webservice controller java.lang.RuntimeException: NOT IMPLEMENTED: MDM_DEVICE.
Currently, this issue will not be fixed. [DDPS-9729]
Dell Security Management Server Technical Advisories
11
New Features and Functionality v10.2.10
● The Security Management Server is improved through various security fixes and enhancements. See Resolved Security
Advisories v10.2.10 for additional information.
● LDAP query responses are hardened in the Security Management Server.
● The Security Management Server is now signed by a SHA256 signing certificate as the SHA1 signing certificate is
deprecated
● The Sync Users at PBA Activation policy is now enabled by default.
● The Security Management Server is now built with InstallShield 2019.
● The Security Management Server v10.2.10 now supports VMware ESXi 6.7
● First Seen in System and Last Seen in System columns have been added to Populations > Endpoints > Details and
Actions for each disk in the selected endpoint.
● When communicating to the Cylance SaaS, delays in communication are presented with the following message:
Attempting to connect to Cylance at this time. Please Check back in a bit.
● On upgrade, all users are reconciled by the Security Management Server to ensure all groups and users are accurately
reflected in the Management Console.
● The now attempts to clean up the audit database by default and adheres to 80% of the 10 GB assigned database size. This
cleaning action prevents critical errors displaying in the Dashboard Notifications pane, which previously detailed that the
Audit Database exceeded its 95% size limitation.
The auditdb.size.NotificationPercentage property is now included inApplication.properties of the Security Server to
manage the size of the Advanced Threat Prevention Audit database.
The auditdb.size.percentage property is the cleanup threshold. When this percentage of the database is exceeded, after
the auditdb.clear.cron is activated, the percentage of total space is calculated. The auditdb.clear.cron default value is
every two hours.
If the auditdb.size.NotificationPercentage value is exceeded, a notification of the cleanup displays the Security
Management Server and the duration defined in auditdb.cleanup.delete.hours is used to clean up the data in the
ddp_audit database below the auditdb.size.percentage threshold.
● After upgrading the Security Management Server, the following fields display the current date rather than Null:
○ Shield Activation
○ PBA Authentication
○ WebUI Login
○ User Creation in WebUI
○ Policy Proxy Sync
● When moving from one page to another, the following prompt displays if policy changes have not been saved.
12
Dell Security Management Server Technical Advisories
Resolved Technical Advisories v10.2.10
● All instances of Data Guardian are removed from the License Management page. [DDPS-9367]
● The Management Console's About page now properly displays Disconnected Mode when Disconnected Mode is in use.
[DDPS-9369]
● PBA Device Control commands now function as expected. [DDPS-9373]
● The Management Console now times out as expected after 30 minutes of inactivity. [DDPS-9387]
● Windows Port Control now properly displays a green check mark on the Security Policy tab when enabled. [DDPS-9397]
● User privileges are now properly evaluated after any modification to membership in Active Directory. [DDPS-9401,
DDPSUS-2689, DDPSUS-2702]
● The sorting function on the Dashboard Notifications now behaves as expected. [DDPS-9405]
● Notifications can now be dismissed as expected. [DDPS-9406]
● Removing a device from an Endpoint Group no longer results in a javascript:null webpage. [DDPS-9421]
● When the Dell PostgresSQL service is inaccessible, the following message displays:
Cannot reach the database, please ensure the Dell PostgresSQL Service is started. [DDPS-9462]
● The Third Party page now properly displays all third party information. [DDPS-9476]
● BitLocker Manager's Details Report now correctly displays drive letters. [DDPS-9496, DDPSUS-2714]
● Policy Logs in the Commit page now return valid date and time information in Log Analyzer when using a non-English
browser language. [DDPS-9514]
● Users with Administrator privileges can now create Endpoint Groups and devices can be added or removed in the Members
pane in the Management Console as expected. [DDPS-9515]
● The Security Management Server can now be configured to allow non-domain activations. If your environment requires this
activation workflow, see KB article SLN306341. [DDPS-9531, DDPSUS-2578]
● Added 12/2020 - Microsoft Edge is supported. [DDPS-9814]
Resolved Security Advisories v10.2.10
● An issue allowing remote deserialization of data through an RMI interface is resolved. For more information, see KB article
SLN320536. [DDPS-9446]
● An issue resulting in users with the Account Administrator role in the Security Management Server elevating their
permissions inappropriately is resolved. [DDPS-9516]
● An issue resulting in blank headers incorrectly displaying during a security scan is resolved. [DDPS-9519]
Technical Advisories v10.2.10
● In rare circumstances, unaccepted policies do not display an error. As a work around, check the Security Server logs for
Invalid Values. [DDPS-9501, DDPS-9534]
● If the common name of a user is changed at the Domain Controller level, the Management Console does not reflect the new
name. [DDPS-9510]
● If an existing email notification is modified then saved, the next new email notification inherits the previous notification's
modifications. [DDPS-9527]
● Non-domain activations using the same hostname and username previously activated against a Security
Management Server fail to activate and log the following failure in the Compatibility Server.
[DDPS-9531, DDPSUS-2578]
● The Refresh button is not available in the Management Console on the following pages:
○ Domains
○ User Groups
○ User
○ Endpoint Groups
○ Endpoint Details and Actions
As a work around, refresh the browser. [DDPS-9532]
● After the initial activation of Advanced Threat Prevention in the Management Console, the Advanced Threat Details page
does not properly display. As a work around, log out and back into the Management Console. [DDPS-9533]
Dell Security Management Server Technical Advisories
13
● When recreating the self-signed certificates for the Security Management Server Virtual, the Dell Manager policy signing
certificate is not recreated. As a work around, import a certificate based on a previously created certificate (see KB article
SLN302996 for more information). Alternatively, select import an existing certificate and choose server.p12 for the
Certificate then server.key for the private key. The default password for this key is changeit. [DDPS-9549]
● The Threat Events tab within Enterprise and per Endpoint can not currently be sorted. [DDPS-9568]
● When modifying the priority list for either Endpoint Groups or User Groups, attempting to sort by Priority in the edit phase
results in an internal error message displayeding and the sort does not aupdate. Cancel the operation or refresh the page to
return to the Group page. As a work around, do not sort while editing the priority list. [DDPS-9567]
● The Uncommitted Policies banner may persist after committing existing policy changes in the Management Console if using
Internet Explorer 11 or earlier. [DDPS-9571]
Technical Security Advisories v10.2.10
● No security advisories exist.
New Features and Functionality v10.2.9
● Data Guardian is removed from the Management Console in the Security Management Server. To reference the latest
documentation and Technical Advisories for Data Guardian, see dell.com/support or contact Dell ProSupport.
● Policy changes can now be viewed In Management > Commit by selecting View Logs. View Logs displays an overview of
policy changes associated with the selected commit.
● New installs of the Security Management Server now listen on TLS 1.2 by default for all Java-based services, including Dell
Security Server, Dell Device Server, and Dell Compliance Reporter Server. Note that the Dell Core Server is not configured
by default to use TLS 1.2 on new installs to avoid introducing compatibility issues with other applications that may exist on
the same server.
Upgrading the Security Management Server does not change these by default to avoid any compatibility issues with
currently connecting devices. For information on modifying the SSL/TLS accepted protocols for existing Security
Management Server installs, and for information on securing the Dell Core server, a Microsoft .NET based service, see
KB article SLN313386.
Resolved Technical Advisories v10.2.9
● Removing override prompts for pending policy changes now displays the correct number of changes under Uncommitted
Policies. [DDPS-3974]
● The correct error message now displays when adding a domain with an invalid port number. [DDPS-6263]
● In License Management, the correct tooltip now displays when the license pool is exceeded. [DDPS-7176]
● All text now displays properly when adding or modifying Endpoint Groups or User Groups. [DDPS-7177]
● The German and French Event Managements page now properly displays. [DDPS-7249]
● Editing administrator roles in the Management Console now yields an accurate warning message. [DDPS-7300,
DDPSUS-2311]
● Threat Protection licenses are now properly consumed when products are installed and deactivated. [DDPS-8925,
DDPSUS-2590]
● An issue resulting in a column in Endpoint Groups not displaying is resolved. [DDPS-8832]
● Password validation no longer fails with an error if an administrator's password contains double quotations. [DDPS-8936]
● When installing the Security Management Server on Windows, the ACL service starts as expected if the administrator's
password contains a backslash. [DDPS-8938]
● An issue resulting in failed certificate imports to the Security Server is resolved. [DDPS-8939]
● An issue resulting in truncated databases after an upgrade failure is resolved. [DDPS-8940]
● The Management Console now displays the correct number of protected endpoints on the Dashboard page and Endpoints
page. [DDPS-8868]
● The Security Management Server installer now calculates the space required for the Postgres Audit database on the system
drive. [DDPS-9059]
● An issue resulting in Digicert root not being imported after upgrading the Security Management Server is resolved.
[DDPS-9246]
● In Manage Reports > Email Report Schedules, the page title now displays properly. [DDPS-9275]
14
Dell Security Management Server Technical Advisories
● An issue caused by an incorrectly defined syslog/SIEM server in Events Management in the Management console which
resulted in a loop in the Audit Event export job and excessive CPU usage is resolved. [DDPS-9307]
● An issue resulting in the Bypass Login command being incorrectly defined as the Unlock command for devices with a
Pre-boot Authentication environment is resolved. [DDPS-9308]
● Encryption Technology now properly displays in the Device Detail pane when a specific endpoint is selected. [DDPS-9310]
● Modifications to syslog configuration in Services Management > Event Management is now logged in Security Server logs
and Administrator Action logs as expected. [DDPS-9329]
● Advanced Threat Event Data now exports at the Endpoint level as expected. [DDPS-9327, DDPSUS-2658]
Technical Advisories v10.2.9
● No technical advisories exist.
New Features and Functionality v10.2.7
● In Populations > Endpoint Groups, groups now display by policy priority.
● Endpoint groups have a new option to build groups based on a TPM being Present or a TPM being Active on a device with
Dell Encryption installed.
● Test emails can now be sent in the Management Console to validate email workflows.
To test the email workflow:
1. Navigate to Management > Notification Management.
2. Select Send Test Email.
3. Specify the email to test and select Send Email.
If the email passes through the Dell Server successfully, the following results screen displays.
The following is an example of successful test email.
Dell Security Management Server Technical Advisories
15
● The Data Guardian web portal can now be activated through a Security Management Server front end server. See Data
Guardian Windows, Mac, Mobile, and Web Administrator Guide for requirements of activating the Data Guardian web portal
against a Security Management Server.
Resolved Technical Advisories v10.2.7
● An issue resulting in the inability to log into the Data Guardian web portal is resolved. [DDPS-7310, DDPSUS-2557]
● The Server Configuration Tool now updates all required elements when importing SSL and TLS certificates. [DDPS-8450]
● Authentication processes around the Dell Server's message broker is improved. [DDPS-8456]
● Services are hardened to improve security posture. [DDPS-8487, DDPS-8689, DDPS-8740]
● An issue resulting in an inaccurate number of policy overrides displaying is resolved. [DDPS-8492]
● When changing priority values for Content Based Protection, all values populate and remain as expected. [DDPS-8531]
● Data Guardian users in an Access Group can now open swept files as expected when the Allow Access for Swept Files policy
is enabled in the Dell Server. [DDPS-8556]
● Selected mobile devices can be removed from Populations > Endpoints as expected. [DDPS-8853]
● In Populations > Endpoints, Export File as an Excel document now functions as expected. [DDPS-8857]
● New email notifications no longer inherit modifications to existing email notifications. [DDPS-8881]
● Scheduled reporting emails now send at their scheduled time. [DDPS-8888]
● Manage Reports now only accepts emails distinguished by comma separated values. [DDPS-8955]
Technical Advisories v10.2.7
● Dell Data Guardian's Data Classification policy is rebranded to Content Based Protection. [DDPS-8855, DDPS-8861]
● The Postgres Audit database is now installed in C:\ProgramData. The Security Management Server installer currently does
not calculate the space required for the Postgres Audit database on the system drive. [DDPS-9059]
New Features and Functionality v10.2.6
● The Dell ACL service is rebranded to Del Access Group service.
16
Dell Security Management Server Technical Advisories
Resolved Technical Advisories v10.2.6
● The Security Management Server's built-in help file is now appropriate automatically translated for all supported languages
based on browser locale. [DDPS-8566]
● Logs are now properly updated on the Log Analyzer page after adding a Web Portal URL on the Data Guardian Management
page. [DDPS-8706]
● The Security Management Server's applications and resource files are now signed by Dell's SHA-1 and SHA-256 code-signing
certificates. [DDPS-8711, DDPS-8712, DDPS-8722, DDPS-8723]
● User Groups and Endpoint Groups no longer accept special characters in the Priority field when using Internet Explorer.
[DDPS-8735]
● Fields can be searched as expected in Managed Reports. [DDPS-8737]
● Type and Priority values are now retained after updating the Email field in Edit Notifications. [DDPS-8755]
● In Dashboard > Endpoint Protection Status > Protection Status, the Data Guardian column now displays as expected.
[DDPS-8772]
Technical Advisories v10.2.6
● Selected mobile devices cannot currently be removed from Populations > Endpoints. As a work around, select the mobile
device's hostname then select Remove on the Endpoint Details page. [DDPS-8853]
● In Populations > Endpoints, Export File as an Excel document fails with a 404 error. [DDPS-8857]
● In Dashboard > Endpoint Protection Status > Protection Status, the Shield column is rebranded to PBE. [DDPS-8771]
● Cloud Device Control commands do not currently generate logs. [DDPS-8866]
● If an existing email notification is modified then saved, the next new email notification inherits the previous notification's
modifications. [DDPS-8881]
● Scheduled reporting emails send 30 minutes later than their scheduled time. [DDPS-8888]
● If an administrator's password contains double quotations, password validation fails and the following message displays:
Credentials are invalid. Please verify the logon and password. [DDPS-8936]
● When installing the Security Management Server on Windows, if the administrator's password contains a backslash, the ACL
service fails to start resulting in a timeout. [DDPS-8938]
New Features and Functionality v10.2.5
● No new features or functionality exist.
Resolved Technical Advisories v10.2.5
● Search performance for Advanced Threat Events and Audit Event data has been improved. [DDPS-8342, DDPS-8373]
● The default version of PostgreSQL has been updated to resolve third-party vulnerabilities. The PostgreSQL service
leveraged by the Security Management Server is rebranded to Dell PostgreSQL 10.7. [DDPS-8480, DDPS-8985]
● An error is no longer returned to an external user when attempting to pre-share key access to another external user.
[DDPS-8664]
Technical Advisories v10.2.5
● Logs are not properly updated on the Log Analyzer page after adding a Web Portal URL on the Data Guardian Management
page. [DDPS-8706]
● When using Internet Explorer and editing priority, User Groups and Endpoint Groups incorrectly accepts special characters in
the Priority field. [DDPS-8735]
● Type and Priority values are not retained after updating the Email field in Edit Notifications. [DDPS-8755]
Dell Security Management Server Technical Advisories
17
New Features and Functionality v10.2.4
● A new policy can now be committed after changing the Portal URL.
To update the portal URL:
1. In the left pane, navigate to Management > Data Guardian Management.
2. Select the Web Portal tab.
3. Enter the updated URL and click Save.
NOTE: The Commit Policies badge updates after the user navigates away from this page.
● Windows Server 2019 (Standard/Datacenter) is now supported.
● Circles of Trust is rebranded to Access Groups.
Resolved Technical Advisories v10.2.4
● Updated 6/2019 - Report Administrator, Report Owner, and Report User roles can now log in to the Management Console as
expected. [DDPS-6101, DDPS-8625]
● An issue resulting in the Type and Priority fields persisting after creating multiple notifications in the Management Console is
resolved. [DDPS-6779]
● Resolved an issue with malformed dates causing SIEM/Syslog events to improperly output to their network or local
destinations. [DDPS-7570, DDPSUS-2325]
● An issue resulting in Managed Reports not displaying EMS events is resolved. [DDPS-8561, DDPSUS- 2532]
● An issue resulting in users with appropriate file rights not displaying in the Pre-Share UI is resolved. [DDPS-8567]
● Resolved an issue where the Security Management Server's Core Server, ACL Service, and Key Server would not start after
a reboot. For more information, see https://www.dell.com/support/article/us/en/04/sln316840. [DDPS-8522]
Technical Advisories v10.2.4
● No technical advisories exist.
New Features and Functionality v10.2.3
● Administrators can now manage keys in the Management Console.
To find/change the owner for a key:
1. In the left pane, navigate to Management > Data Guardian Management.
2. Select the Key Management tab.
3. Enter the keyid and click Find Owner. The owner displays in the Current Owner field.
4. In the New Owner field, enter the email address of the new owner and click Change Owner.
To change ownership for all keys:
1. In the left pane, navigate to Management > Data Guardian Management.
2. Select the Key Management tab.
3. Select Change Ownership for ALL keys.
4. Enter the email address of the current owner.
5. Enter the email address of the new owner.
6. Click Change Owner.
During the transfer, a table displays at the bottom, Key Changes in Progress. When complete, this content is removed. The
Log Analyzer displays a log of the keys that have changed ownership.
● Access Groups is now available the Management Console. To enable Access Groups:
1. In the left pane, navigate to Management > Services Management.
2. Select the Data Guardian tab.
3. For Access Groups, click On.
18
Dell Security Management Server Technical Advisories
For more information on Access Groups, refer to AdminHelp, available in the Management Console.
Resolved Technical Advisories v10.2.3
● An issue resulting in the PostGRESQL database not properly cleaning data during default configured cleanup jobs is resolved.
After installation, on subsequent cleanup jobs, all previous jobs are reconciled. [DDPS-8397]
● An issue with data exported to a Syslog or SIEM server through Event Management in the Management Console is resolved.
[DDPS-8398]
Technical Advisories v10.2.3
● In rare circumstances, pre-sharing a protected document with an embargo set may not in all cases pre-share the key. To
work around this issue, manually share the key through the right-click menu from an internal user or an internal file owner.
[DDPS-8567]
New Features and Functionality v10.2.2
● No new features or functionality exist.
Resolved Technical Advisories v10.2.2
● The Security Management Server now validates the version of Microsoft Visual C++ 2013 version 12.0.40660. If this version
is not found, the installer exits. Please validate this version is installed before installing the Security Management Server.
[DDPS-8010, DDPSUS-2437]
● Translation consistency is improved. [DDPS-8064]
● An issue resulting in service account names being rejected when starting with an escape character such as u and some
special characters is resolved. [DDPS-8109]
● Clean installs of the Security Management Server no longer result in ACL service error messages. [DDPS-8149, DDPS-8270]
● Sorting by Classification Path in Audit Events no longer results in an error. [DDPS-8151]
● An issue that resulted in internal errors when transitioning between screens in the Management Console is resolved.
[DDPS-8279]
Technical Advisories v10.2.2
● No technical advisories exist.
New Features and Functionality v10.2.1
● Audit data for blocked print screen events, blocked processes events, and blocked prints events are now displayed in the
Management Console.
Resolved Technical Advisories v10.2.1
● Threat Events tab is now visible when at least one Threat Prevention or Advanced Threat Prevention license is consumed.
[DDPS-5728]
● Manage Reports work as expected when special characters are added to the Report Name . [DDPS-6362]
● The default setting exclusions for weak ciphers are now preserved when upgrading from v9.10 to the latest Dell Security
Management Server. [DDPS-7301]
● Time stamps used for "Commit" date/times are stored as UTC and will be converted to the current time-zone based on the
time-zone setting of the system viewing the WebUI. [DDPS-7855]
Dell Security Management Server Technical Advisories
19
● Resolved mismatching information for the Unique ID for endpoints on the "Endpoint" page, and on the "Device Detail" page.
[DDPS-7928]
● Resolved an issue with dependency management, resulting in failures to update the Dell Security Management Server Virtual.
[DDPS-7980]
● Resolved an issue with innocuous error messages within the Dell Beacon Service by removing unnecessary dependencies.
[DDPS-7981]
● Resolved an incorrect symbolic link that resulted in additional storage overhead for logging. [DDPS-7991]
● Resolved an issue where the Windows Application for Dell Security Management Server may timeout or take an extremely
long time to download key data. [DDPS-8121, DDPSUS-1796]
Technical Advisories v10.2.1
● No technical advisories exist.
New Features and Functionality v10.1
● A Downloads page has been added to Management Console for downloading Dell Data Security endpoint software.
● Scheduling report emails is now supported. A report must be created under Reporting > Manage Reports in the Management
Console before the scheduling option is available.
○ The Email field is limited to 1024 characters.
○ Day of Month drop down will provide 1 - 31 and Last options to choose.
○ Time, will schedule the time based upon your current location.
○ Schedule Details page shows the date sent, schedule, next send, etc.
Resolved Technical Advisories v10.1
● A forensic key bundle download using the Administrative Download Utility (CMGAd) now succeed for endpoints with large
key sets based on a high number of activations. [DDPS-6920, DDPSUS-2361]
● An issue resulting with a customer unable to run Advanced Threat Prevention reports while using the compliance reporter
due to low memory has been resolved. [DDPS-7386, DDPSUS-2341]
● Dell Enterprise Server v10.1 includes a security update addressing a Jetty Security Bypass vulnerability (CVE-2017-7658).
Customers and field teams should take v10.1 and all Dell Enterprise Server updates or sustaining releases as a best practice.
[DDPS-7387, DDPSUS-2344]
● Selections made in the Audit Events page are now saved after a user navigates away from the page. [DDPS-7445]
● Servers with large amount of events from Advanced Threat Prevention may experience high memory usage on the Dell
Security Management Server or Dell Security Management Server Virtual. This may result in services crashing on the server.
Maximum heap space and physical memory can be increased to work-around this issue. [DDPS-7469]
● Compliance Reporter is hidden by default on the Management Console. [DDPS-7717]
● The email audit event under Data Guardian's Advanced Details for open events correctly shows the sender email in From.
[DDPCE-9846]
Technical Advisories v10.1
● By default the Dell Security Management Server and Dell Security Center consoles will export
data in UTF-8 format. In some cases, this data does not display properly if the file is
opened and displayed in Unicode, which is done by default for Microsoft Excel. For information
on opening files with UTF-8 encoding, see: https://support.office.com/en-us/article/choose-text-encoding-when-
you-open-and-save-files-60d59c21-88b5-4006-831c-d536d42fd861?ocmsassetID=HA010121249&CorrelationId=050891fd-
c54e-4e23-9e74-c8c75962d07f&ui=en-US&rs=en-US&ad=US. [DDPS-7613]
● When the Security Management Server is configured within an IPv6 environment with no IPv4 support, notification
registration fails due to a communications error. To work around this issue, enable IPv4 support in this environment.
[DDPS-7655]
● Navigating to the Enterprise > Advanced Threat Events tab and selecting the Host Name from the list results in being
directed to Endpoint Details & Actions, instead of the Advanced Threat Events tab. To work around this issue, click
Advanced Threat Events from Details & Actions. [DDPS-7739]
20
Dell Security Management Server Technical Advisories
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
Dell Data Guardian User guide
- Category
- Antivirus security software
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dell Data Guardian User guide
-
-
-
-
-
-
-
-
-
Other documents
-
Symantec Server Security Expressions Server User manual
-
HP Samsung SCX-4655 Laser Multifunction Printer series User guide
-
Eddyfi Technologies SIMS PRO 1.2R4 Release Notes Operating instructions
-
McAfee FWEC2050UPGR Datasheet
-
-
F-SECURE POLICY MANAGER 9.0 Administrator's Manual
-
Sharp MX-3071 Operating instructions
-
-
HP Elite Slice for Meeting Rooms User guide
-
DSC REPORTER User manual
