Gamber-Johnson 7160-0419 Installation guide

Type
Installation guide

This manual is also suitable for

Gamber-Johnson 7160-0419 is a versatile clevis designed for mounting equipment in various applications. Its adjustable swivel tension allows for customized positioning, ensuring optimal viewing angles or device orientation. Whether you need to install it on equipment with a Gamber Johnson swivel pattern cutout or a rigid flat surface, this clevis provides a secure and stable mounting solution.

Gamber-Johnson 7160-0419 is a versatile clevis designed for mounting equipment in various applications. Its adjustable swivel tension allows for customized positioning, ensuring optimal viewing angles or device orientation. Whether you need to install it on equipment with a Gamber Johnson swivel pattern cutout or a rigid flat surface, this clevis provides a secure and stable mounting solution.

Rev.C
INST-585
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
7160-0419
INSTALLATION INSTRUCTIONS
PS-001
Product Form Revision
CLEVIS
INSTALL ON RIGID FLAT SURFACE
Drill two 0.261(G drill) inch diameter holes spaced 2 inches apart in desired 1.
location. Pay attention to orient holes such that Clevis is mounted in required
position.
2. Remove 1/4-20 Lock Nuts (item 1) and Washers (item 2) from Clevis.
3. Place Clevis on surface with Studs (item 3) going through holes.
4. Install Washers (item 2) and 1/4-20 Lock Nuts (item 1) on Studs (item 3) and
tighten to secure Clevis.
Position Clevis as desired and tighten 1/4-20 Lock Nuts (item 1) securly locking
2
Clevis into position.
4.
1
loosely tighten.
FOR DESIRED SWIVEL TENSION
INSTALL ON EQUIPMENT WITH GAMBER JOHNSON SWIVEL PATTERN CUTOUT
Remove 1/4-20 Lock Nuts (item 1) and Washers (item 2) from Clevis.1.
Place Clevis on equipment with Studs (item 3) going through curved slots.2.
Install Washers (item 2) and 1/4-20 Lock Nuts (item 1) on Studs (item 3) and 3.
TIGHTEN OR LOOSEN NUT
3
© Copyright 2012 Gamber-Johnson, LLC
  • Page 1 1

Gamber-Johnson 7160-0419 Installation guide

Type
Installation guide
This manual is also suitable for

Gamber-Johnson 7160-0419 is a versatile clevis designed for mounting equipment in various applications. Its adjustable swivel tension allows for customized positioning, ensuring optimal viewing angles or device orientation. Whether you need to install it on equipment with a Gamber Johnson swivel pattern cutout or a rigid flat surface, this clevis provides a secure and stable mounting solution.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI