4. When the peak temperature is reached, the degrees
sign will stop flashing and an audible alarm will sound.
Note: A normal temperature will sound as steady beeps
“Bi-Bi-Bi-Bi”; alarm sounds more rapidly when temperatures
of 37.8°C (100°F) are detected “Bi-Bi-Bi-----Bi-Bi-Bi---”.
5. To prolong battery life, press the On/Off to turn the
device off after testing. If no action is taken, the device will
automatically shut off after ten minutes of inactivity.
6. Wipe the probe with isopropyl alcohol to disinfect and
store in provided protective case.
BATTERY REPLACEMENT
1. Replace battery when the “ ” appears in the lower right
corner of the LCD display.
2. Using a thin board, such as a coin, turn the fillister
counter-clockwise until the battery cover is off.
(See figure below)
3. Use a non-metal instrument to remove the old battery
from the battery holder. Dispose of the old battery,
according to local law.
4. Place a new 3.0V DC button battery type CR2032 into the
thermometer with the positive side facing up.
Replace battery cover and turn clockwise to firmly lock the
cover into position.
CLEANING AND DISINFECTING
For general cleaning, wipe the thermometer down with
a damp cloth and mild detergent. Dry immediately with a
soft, dry cloth. Disinfect the thermometer probe by wiping or
dipping the tip in a solution of isopropyl alcohol.
PRODUCT DISPOSAL
Please ensure environmental protection. Batteries do
not belong in domestic waste but should be treated as
hazardous waste. Please dispose of them at a designated
collection point or recycling center according to local law.
LEGAL REQUIREMENTS AND GUIDELINES
This thermometer is manufactured according to the
system of EN12470-3:2000+A1:2009, ASTME1112-00. This
thermometer complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this thermometer may not cause harmful interference,
and (2) this thermometer must accept any interference
received including interference that may cause undesired
operation. And the manufacturer is ISO 9001: 2008 and
ISO 13485:2003 + AC: 2007 certified.
SPECIFICATIONS
GUARANTEE REGISTRATION
You are protected by Vive Health’s industry leading
guarantees and customer service:
If you did not purchase through vivehealth.com, please
register at vivehealth.com/register to validate
your guarantee.
Product Code: DMD1026GRY
© Copyright and Distributed by Vive Health
8955 Fontana Del Sol Way, Naples, FL 34109
All Rights Reserved. Made in China.
Type: Digital Thermometer (Not Predictive)
Range: 32.0°C ~ 42.9°C (90.0°F ~ 109.9°F) (°C/°F chosen
by manufacturer)
Accuracy: ±0.2°C under 35.5°C or over 42.0°C
(±0.4°F under 95.9°F or over 107.6°F)
at ambient temperature of 18°C to 28°C
(64.4°F to 82.4°F)
Display: Liquid crystal display, 3 1/2 digits
Memory: Last 10 memory
Battery: One 3.0V DC button battery type CR2032
Battery Life: Approx 200 hours
Dimension: 13.5cm x 3.4cm x 1.8cm (LxWxH)
Weight: Approx 21 grams including battery
Using Environment: Temperature: 5°C ~ 40°C (41°F ~ 104°F)
Relative humidity: 15% ~ 95%RH
Storage and
Transportation
Condition:
Temperature: -20°C ~ 55°C (-4°F ~ 131°F)
Relative humidity: 15% ~ 95%RH
Ingress Protection
Rating: IP27
Classication: Type BF
Figure 3 Figure 4 Figure 5 Figure 6 Figure 7
VIVE GUARANTEE