Cisco Telepresence Integrator C Series User guide

Type
User guide
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 1
Camera guide
APRIL 2017
PrecisionHD 1080p12x PrecisionHD 720pPrecision 40
(PrecisionHD 1080p4x S2)
PrecisionHD 1080p2.5x
Cisco TelePresence PrecisionHD Camera
Camera Guide
PrecisionHD 1080p4x
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 2
Camera guide
Whats in this guide?
The top menu bar and the entries in the Table of
Contents are all hyperlinks, just click on them to go
to the topic.
We recommend you visit our web site regularly for
updated versions of the user documentation. Go
to: http://www.cisco.com/go/telepresence/docs
Table of Contents
Introduction .......................................................................3
About this guide ..................................................................4
User documentation ...........................................................4
Software .............................................................................4
Physical interface ..............................................................5
PrecisionHD Camera 1080p12x .........................................6
PrecisionHD Camera 1080p4x ........................................... 7
Precision 40 Camera* ........................................................8
PrecisionHD Camera 1080p2.5x ........................................9
PrecisionHD Camera 720p ...............................................10
Connecting to a codec .................................................... 11
SX20 Codec configurations .............................................12
SX80 Codec configurations .............................................12
Codec C20 configurations ...............................................12
Codec C40 configurations ...............................................13
Codec C60 configurations ...............................................13
Codec C90 configurations ...............................................13
Cable options for Precision 40* and
PrecisionHD 1080p2.5x ....................................................14
Cable options for PrecisionHD Camera 1080p4x and
1080p4x * .......................................................................... 15
Cable options for PrecisionHD Camera 1080p12x ..........16
Camera cables ................................................................. 17
HDMI cable ................................................................... 17
HD–SDI cable ................................................................ 17
HDMI to DVI–D adapter .................................................17
Daisy chain camera cable .............................................17
Camera cable ...............................................................17
Pin-out for cables ......................................................... 17
Pin out — Custom plug camera cable ...........................18
Pin out — Custom to HDMI and RJ45 camera cable .....19
Pin out — Custom to HDMI female and RJ45 female
camera cable ............................................................... 20
Daisy chaining ................................................................. 21
Daisy chaining PrecisionHD Camera 1080p12x ...............22
Daisy chaining PrecisionHD Camera 1080p4x ................ 23
Daisy chaining PrecisionHD Camera 720p .......................24
Video output formats .......................................................25
PrecisionHD Camera 1080p12x ...................................... 26
Video output formats ................................................... 26
Line voltage frequency ................................................ 26
DIP switch table ........................................................... 26
Appendices...................................................................... 27
Camera control with VISCA™ protocol ............................ 28
RS232 Parameters ..................................................... 28
RS–232 commands and inquiries ................................ 28
VISCA/RS–232 control protocol .................................... 29
VISCA message format ................................................ 29
Network and interface commands .............................. 30
Push messages ........................................................... 30
Camera commands ..................................................... 30
Camera commands, continued... ..................................31
PTZF - movement commands .....................................31
PTZF - movement commands, continued... ................. 32
Inquiries ....................................................................... 33
Software upload commands ........................................ 34
Debug commands for Cisco cameras ......................... 34
Other commands ......................................................... 34
Video mode selection .................................................. 35
DIP Switch settings ...................................................... 35
DIP switch table ........................................................... 35
Technical specifications ................................................... 36
PrecisionHD 1080p2.5x Camera ................................. 36
Precision 40 Camera** ................................................ 36
PrecisionHD Camera 1080p4x .................................... 36
PrecisionHD Camera 1080p4x* ..................................37
PrecisionHD Camera 1080p12x ...................................37
PrecisionHD Camera 720p ...........................................37
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Contents
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 3
Camera guide
Chapter 1
Introduction
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Introduction
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 4
Camera guide
About this guide
This user guide describes the information needed to install and
use the PrecisionHD 1080p cameras. Some information about
the PrecisionHD 720p camera is also included.
Applies to the products listed below:
PrecisionHD Camera 1080p12x
Precision 40 Camera (PrecisionHD Camera 1080p4x S2)
PrecisionHD Camera 1080p4x
PrecisionHD Camera 1080p2.5x
PrecisionHD Camera 720p
User documentation
The user documentation for the Cisco TelePresence systems,
running the TC and CE software, have several guides aimed at
various user groups.
Video conference room primer
Video conference room acoustics guidelines
Getting started guide for the TelePresence systems
User guide for the TelePresence systems
Administrator guides for the TelePresence systems
Camera guide for the PrecisionHD cameras
API reference guides
TC Console user guide
Physical interfaces guides
Regulatory compliance and safety information guides
Legal and licensing information for products using TC and
CE software
Download the user documentation
Go to:http://www.cisco.com/go/telepresence/docs and
select your product to see the user documentation for your
product.
Software
The camera software is automatically upgraded through the
codec.
NOTE: The Cisco TelePresence Precision 40 and PrecisionHD
1080p2.5x cameras are not supported by the C series codecs,
and are only updated when connected to a SX20 codec. We
do not recommend using the Precision 40 and PrecisionHD
1080p2.5x cameras with C series codecs.
The Cisco TelePresence PrecisionHD Camera 1080p4x is not
supported by the SX20 codec.
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Introduction
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 5
Camera guide
Chapter 2
Physical interface
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 6
Camera guide
PrecisionHD Camera 1080p12x
Part number: CTS-PHD-1080P12XG=
Spare PID: CTS-PHD-1080P12XS2=
HDMI and HD-SDI
HDMI is the main video source. The maximum resolution
is 1080p60.
HD-SDI* is the secondary video source. The maximum
resolution is 1080p30.
The HDMI and HD-SDI* can be used simultaneously. The
maximum resolution is 1080p30, if you want both to run
with the same resolution.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
When the camera is used with a Cisco codec, power is
supplied through the Camera control cable.
When the camera is used with non-Cisco codecs, you
may have to connect the power separately.
Extra camera
For multi-camera setup, e.g. when you connect cameras in a
daisy chain**:
The first camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
Use an extra camera cable between the Extra camera
sockets.
Ethernet
For software upgrades on daisy chained cameras. Requires
software version TC3.0 or higher on the Codec C series.
Kensington lock
The Kensington lock may be used to prevent the camera from
being moved from its place or to prevent theft.
The lens hood is detachable.
We recommend that you mount it to
prevent stray light from disturbing your
video experience. Snap it on gently.
The orange LED lit during a call.
The green LED is continuously lit when
power is On, but it flickers when receiving
signals from the remote control.
When mounted upside down on the
Profile 65” and the Profile 65” Dual, the
LED is not visible.
Power supply
Extra camera out and
for daisy chaining**
Camera control
and power
HDMI Video
out
Ethernet
RJ45
HD-SDI
out*
Kensington lock
* Not supported with Codec SX20, C20, C40 and C60.
** Not supported with Codec C20.
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 7
Camera guide
PrecisionHD Camera 1080p4x
Part number (for C series): CTS-PHD-1080P4XS=
HDMI and camera control
HDMI video out
HDMI is the video out source.
The maximum resolution is 1080p30/720p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Daisy chain control is not supported. The camera can be used
in a chain of multiple cameras, but only as the last camera in
the chain.
Power
When the camera is used with a Cisco codec, power is
supplied through the Camera control cable.
When the camera is used with non-Cisco codecs, you
may have to connect the power separately.
USB
For future use.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
CAUTION! Do not pan or tilt the PrecisionHD 1080p4x camera
by hand.
NOTE: The early shipments of the Quick Set C20 came with
an interim version of the PrecisionHD Camera 1080p4x (the
PrecisionHD Camera 1080p4x*).
* Available for a limited period of time.
See the Technical specifications” on page 36 section for details
The orange LED is lit during a call.
The green LED is continuously lit when
power is On, but it flickers when receiving
signals from the remote control.
USB HDMI Video
out
Power supply Camera control and
power
Kensington lock
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 8
Camera guide
Precision 40 Camera*
Only available as a part of th Cisco TelePresence SX20 Quick
Set.
Spare PID: CTS-PHD1080P4XS2=
HDMI and camera control
Video Out
HDMI is the video out source.
The maximum resolution is 1080p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Daisy chain control is not supported. The camera can be used
in a chain of multiple cameras, but only as the last camera in
the chain.
Power
When the camera is used with a Cisco codec, power is
supplied through the Camera control cable.
When the camera is used with non-Cisco codecs, you
may have to connect the power separately.
USB
For future use.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
*Formerly PrecisionHD Camera 1080p4x S2
The LED is lit during a call.
The LED is continuously lit when the
system is in use. It flickers when the
system receives signals from the remote
control and blinks when rebooting. The
LED pulsates when the system is in
Standby mode.
USB
HDMI Video out,
camera control and
power
Power
supply Kensington lock
Pulsating –——– ——– ——–
Blinking — — — — — — — —
Flickering •••••••••••••••••••••••••
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 9
Camera guide
PrecisionHD Camera 1080p2.5x
Only available as a part of the Cisco TelePresence SX20 Quick
Set.
Spare PID: CTS-PHD-2.5X=
The camera can be mounted on a screen with the camera
bracket that is part of the SX20 Quick Set bundle, or it can
stand on an even surface. The image flips automatically.
HDMI and camera control
Video out
HDMI is the video out source.
The maximum resolution is 1080p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
For future use.
USB
For future use.
The LED is lit during a call.
The LED is continuously lit when the
system is in use. It flickers when the
system receives signals from the remote
control and blinks when rebooting. The
LED pulsates when the system is in
Standby mode.
USB
HDMI Video out,
camera control and
power
Power supply
Pulsating –——– ——– ——–
Blinking — — — — — — — —
Flickering •••••••••••••••••••••••••
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 10
Camera guide
The orange LED is lit during a call.
PrecisionHD Camera 720p
HDMI
HDMI is the main video source.
The maximum resolution is 720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
When the camera is used with a Cisco codec, power is
supplied through Camera control cable.
When the camera is used with non-Cisco codecs, you
may have to connect power separately.
Extra camera
If you want to connect cameras in a daisy chain*:
The first camera in the chain is powered by the camera
control cable. The other cameras must use the 12V DC
Power in.
Use an extra camera cable between the Extra camera
sockets.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
HDMI video out Camera control
and power
Kensington lockVISCA Daisy chain
Power in 12V DC
* Not supported with Codec C20.
The green LED is continuously lit when
power is On, and flickers when receiving
signals from the remote control.
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 11
Camera guide
Chapter 3
Connecting to a codec
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 12
Camera guide
SX20 Codec configurations
Connecting to the Precision 40* and PrecisionHD
1080p2.5x cameras
Connect the combined custom HDMI and camera control
cable:
From the HD VIDEO OUT connector on the camera.
To the CAMERA connector on the SX20. Visca™ proto-
col is supported.
Connecting to PrecisionHD Camera 1080p12x
Connect the combined custom HDMI and camera control
split cable:
From the HD VIDEO OUT (HDMI) connector on the
camera.
From the CODEC CONTROL IN (RJ45) connector on the
camera.
To the CAMERA connector on the SX20. Visca™ proto-
col is supported.
*Formerly PrecisionHD Camera 1080p4x S
SX80 Codec configurations
Connecting to the Precision 40 Camera*
Connect the combined custom to HDMI and camera control
split cable:
From the HD VIDEO OUT connector on the camera.
To the CAMERA (HDMI) connector on the codec SX80.
We recommend using the 1st camera input for the main
camera.
To the 2nd or 3rd ETHERNET PORT (RJ45) on the SX80.
Codec C20 configurations
Connecting to the PrecisionHD Cameras 1080p12x and
1080p4x
Connect the HDMI cable:
From the HD VIDEO OUT (HDMI) connector on the
camera.
To the CAMERA (HDMI) connector on the Codec C20.
Connect the camera control cable:
From the CODEC CONTROL IN (RJ45) connector on the
camera.
To the CAMERA CONTROL (RS–232) connector on the
Codec C20. Visca™ protocol is supported.
Camera
control
Camera
HDMI
Camera HDMI and
camera contol
1
1
Output connector
Input connector
Codec connectors
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 13
Camera guide
Codec C40 configurations
Connecting to the PrecisionHD Cameras 1080p12x and
1080p4x*
Connect the HDMI cable:
From the HD VIDEO OUT (HDMI) connector on the
camera.
To the HDMI 1 IN (HDMI) connector on the Codec C40.
Connect the camera control cable:
From the CODEC CONTROL IN (RJ45) connector on the
camera.
To the CAMERA CONTROL (RS–232) connector on the
Codec C40. Visca™ protocol is supported.
Codec C60 configurations
Connecting to the PrecisionHD Cameras 1080p12x and
1080p4x*
Connect the HDMI cable:
From the HD VIDEO OUT (HDMI) connector on the
camera.
To the HDMI 1 IN (HDMI) connector on the Codec C60.
Connect the camera control cable:
From the CODEC CONTROL IN (RJ45) connector on the
camera.
To the CAMERA CONTROL (RS–232) connector on the
Codec C60. Visca™ protocol is supported.
Codec C90 configurations
Connecting to the PrecisionHD Cameras 1080p12x and
1080p4x*
Basic setup
Connect the HDMI cable:
From the HD VIDEO OUT (HDMI) connector on the
camera.
To the HDMI 1 (HDMI ) connector on the Codec C90.
Connect the camera control cable:
From the CODEC CONTROL IN (RJ45) connector on the
camera.
To the CAMERA CONTROL (RS–232) connector on the
Codec C90. Visca™ protocol is supported.
Other configuration for 1080p12x
The HDMI <1..4> and HD-SDI <1..4> connectors can be
used for the camera. The HDMI and HD-SDI can be used
simultanously.
Connect the HD-SDI cable:
From the HD-VIDEO OUT (HD-SDI) connector on the
camera.
To the HD-SDI <1..4> connector on the Codec C90.
1
1
Output connector
Input connector
Codec connectors
Camera
control
HDMI 1HD-SDI
Camera
control
HDMI 1
Camera
control
HDMI 1
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 14
Camera guide
Sheet size:
Scale:
Unit:
European
projection
Cisco TelePresence SX80 A3
mm (in.)
1:2
D15122.01 | JUNE 2014 | © 2014 Cisco Systems, Inc. All rights reserved.
437
(172.05)
293
(115.35)
18.33
(7.22)
44
(17.32)
Cable options for Precision 40* and PrecisionHD 1080p2.5x
SX20 Codec
PrecisionHD Camera 1080p2.5x
Custom plug camera cable
Precision 40 Camera
Custom plug camera cable
SX20 Codec SX80 Codec
Precision 40 Camera
Custom to HDMI and RJ45 female split cable
*Formerly PrecisionHD Camera 1080p4x S2
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 15
Camera guide
C series codecs (C40 codec)C20 codec
Cable options for PrecisionHD Camera 1080p4x and 1080p4x *
PrecisionHD Camera 1080p4x
HDMI and RJ45 to RS 232 cables
PrecisionHD Camera 1080p4x*
HDMI and RJ45 to RS 232 cables
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 16
Camera guide
Sheet size:
Scale:
Unit:
European
projection
Cisco TelePresence SX80 A3
mm (in.)
1:2
D15122.01 | JUNE 2014 | © 2014 Cisco Systems, Inc. All rights reserved.
437
(172.05)
293
(115.35)
18.33
(7.22)
44
(17.32)
SX20 codecC series codecs (C40 codec) SX80 codec
Cable options for PrecisionHD Camera 1080p12x
Custom to HDMI and
RJ45 splilt cable
HDMI and
RJ45 to RS 232 cables
HDMI and
RJ45 to RS 232 cables
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 17
Camera guide
Pin-out for cables
If you must assemble your own cables, the tables show the pin-out required.
Camera cables
HDMI cable
The HDMI cable delivered with the camera is 5 meters.
Maximum length is 15 meter with a category 2 certified good
quality HDMI cable. This cable can be used with the C20, C40,
C60 and C90 Codecs.
Part number: CAB-2HDMI-5M=
HD–SDI cable
The HD-SDI cable must be purchased separately. The
maximum recommended length of HD–SDI cable is 100
meters. This cable can be used with the C90 Codec.
HDMI to DVI–D adapter
A HDMI to DVI–D adapter is used when connecting a camera to
a MXP Codec or a Video Switch.
Daisy chain camera cable
CAB-VCDC-6.5M= PrecisionHD Camera Daisy-Chain cable for
Visca Control-6.5 m
CAB-VCDC-20M= PrecisionHD Camera Daisy-Chain cable for
Visca Control-20 m
Camera cable
Control cable for use with C90, C60, C40:
CAB-VC-5M= Visca Control Cable 5 m - DB9 to RJ45
CAB-VS-6.5M= Visca Control Cable 6.5 m - DB9 to RJ45 -
requires PSU-CAM-V=
CAB-VS-20M= Visca Control Cable 20 m - DB9 to RJ45 -
requires PSU-CAM-V=
Pin-out—Daisy chain camera cable
RJ11 to RJ45 (8 pin shielded)
Signal name R J11
pin
RJ45
pin
Signal name
GND 1 2 GND
Presence
+12Vd c
2 1 Presence
+12 Vd c
TX 3 3 RX
RX 4 6 TX
GND 5 7 GND
NC 6 8 NC
NA NA 4NC
NA NA 5NC
Pin-out—camera cable
RJ45 (8 pin shielded) to D-SUB
Signal name RJ45
pin
D-SUB
pin
+12Vd c 1 4
GND 2 5
RX 3 2
TX 6 3
NC 4 1
NC 5 6
GND 7 5
+12 Vd c 8 4
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 18
Camera guide
Pin out — Custom plug camera cable
The custom cable is used when connecting a SX20 codec to a PrecisionHD Camera
1080p2.5x or Precision 40 Camera (Formerly PrecisionHD Camera 1080p4x S2).
Part number: CAB-HDMI-PHD4XS2
Custom plug
Custom plug
Custom plug Custom plug
Pin# Pin# Signal name
1 1 TMDS Data2+
3 3 TMDS Data2-
2 2 TMDS Data2 Shield
4 4 TMDS Data1+
6 6 TMDS Data1-
5 5 TMDS Data1 Shield
7 7 TMDS Data0+
9 9 TMDS Data0-
8 8 TMDS Data0 Shield
10 10 TMDS Clock+
12 12 TMDS Clock-
11 11 TMDS Clock Shield
14 14 Utility
19 19 Hot Plug Detect
17 17 DDC /CEC Ground
13 13 CEC
15 15 SCL
16 16 SDA
18 18 +5V Power
20 20 +12V P o w e r
21 21 GND
23 23 GND
22 22 RS232 level (output)
24 24 RS232 level (input)
Shell Shell Shell
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 19
Camera guide
Pin out — Custom to HDMI and RJ45 camera cable
The custom plug to HDMI and RJ45 plugs cable is used when connecting a SX20
codec to PrecisionHD 1080p4x and 1080p12x cameras.
Part number: CAB-HDMI-PHD12XS
Custom plug
RJ45
HDMI type A plug
Custom plug HDMI type A plug
Pin# Pin# Signal name
1 1 TMDS Data2+
3 3 TMDS Data2-
2 2 TMDS Data2 Shield
4 4 TMDS Data1+
6 6 TMDS Data1-
5 5 TMDS Data1 Shield
7 7 TMDS Data0+
9 9 TMDS Data0-
8 8 TMDS Data0 Shield
10 10 TMDS Clock+
12 12 TMDS Clock-
11 11 TMDS Clock Shield
14 14 Utility (Reserved N.C. on device)
19 19 Hot Plug Detect
17 17 DDC /CEC Ground
13 13 CEC
15 15 SCL
16 16 SDA
18 18 +5V Power
RJ45
20 1 +12V P o w e r
8+12V P o w e r
21 2GND
23 7GND
22 6RS232 level (output)
24 3 RS232 level (input)
Shell SHELL Shell Shell
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 20
Camera guide
Pin out — Custom to HDMI female and RJ45 female camera cable
The custom plug to HDMI female and RJ45 female plugs cable is used as
an extension when connecting a SX20 codec to PrecisionHD 1080p4x and
1080p12x cameras.
Part number: CAB-PHD4XS2-SPLIT
Custom plug HDMI A type female plug
Pin# Pin# Signal name
1 1 TMDS Data2+
3 3 TMDS Data2-
2 2 TMDS Data2 Shield
4 4 TMDS Data1+
6 6 TMDS Data1-
5 5 TMDS Data1 Shield
7 7 TMDS Data0+
9 9 TMDS Data0-
8 8 TMDS Data0 Shield
10 10 TMDS Clock+
12 12 TMDS Clock-
11 11 TMDS Clock Shield
14 14 Utility (Reserved N.C. on device)
19 19 Hot Plug Detect
17 17 DDC /CEC Ground
13 13 CEC
15 15 SCL
16 16 SDA
18 18 +5V Power
RJ45 female plug
20 1 +12V P o w e r
8+12V P o w e r
21 2GND
23 7GND
22 6RS232 level (output)
24 3 RS232 level (input)
Shell SHELL Shell Shell
Custom plug
HDMI A type female
RJ45 female
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

Cisco Telepresence Integrator C Series User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI