1
Installation Guide
Applicable Models: TS 1000/2000 Pro series tripod turnstile
Version: 2.0 Date: March. 2020
1
Chapter 1 Installation
1.1 Installation conditions
As shown in Figure 1-1.
Figure 1-1
1.2 Cabling
1.3 Drilling holes
1.4 Fix the device
2
Chapter 2 Installation Notes
Figure 2-1
Figure 2-2
Note: If the arm can not be lift, please push the arm to close to cabinet direction first,
then lift the arm manually.
3
Passing
indicator
Right
indicator
Left
indicator
Counter 1
Counter 2
Chapter 3 Control Board Introduction
Turnstile control board’s diagram as shown in Figure3-1
Drop arm
Opening
signal input
DC12V output
(12V 3A)
Proximity
switch
DC24V input
Right solenoid
Left solenoid
Drop arm
solenoid
4
5
Chapter 4 Maintenance
6
Chapter 5 Troubleshooting
-
1
-
2
-
3
-
4
-
5
-
6
-
7
ZKTeco TS2000 Pro Series Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Hikvision DS-K3H4410-120 User manual
-
Heute Neptun HCS 1 Original Operating Instructions
-
CAME XVia STAND-ALONE Installation guide
-
-
-
-
-
Hikvision DS-K3Y501 Quick start guide
-
-
