Hagerco 2950 Series - Magnetic Locks Installation guide

Brand: Hagerco

Model: 2950 Series - Magnetic Locks

Type: Installation guide

Glass Door Bracket

Installation Instructions

I-EA00068

Rev 1, Rev Date: 12/12/13

Always visit www.hagerco.com for the latest Installation Instructions

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995

DEVICES COVERED IN THIS DOCUMENT:

2-679-0160 - ALM Glass Door Kit for use with 2951 and 2953 (order 2 for use with 2952 and 2954)

2-679-0161 - DBZ Glass Door Kit for use with 2951 and 2953 (order 2 for use with 2952 and 2954)

INSTALL BRACKET AND BAR

TO GLASS DOOR

BRACKET

BAR

STEP 1

STEP 2

SET

SCREW

SECURE SET SCREWS

WITH ALLEN WRENCH

PROVIDED

RUBBER

PADS

SHIM

GLASS DOOR

FRAME HEADER

PLACE DOOR IN CLOSED

POSITION, FOLD TEMPLATE AS

INDICATED BY DOTTED LINE AND PLACE

TEMPLATE AGAINST FRAME HEADER AND

BRACKET THEN MARK AND DRILL AS

INDICATED.

STEP 3

SIDE VIEW

GLASS DOOR

CLOSED

POSITION

TEMPLATE

FOR 1/2” GLASS DOORS:

PLACE RUBBER PAD &

10GA. SHIM BOTH SIDES.

FOR 5/8” GLASS DOORS:

PLACE RUBBER PAD BOTH

SIDES & 10 GA. SHIM ONE

SIDE ONLY.

FOR 3/8” GLASS DOORS:

PLACE RUBBER PAD BOTH

SIDES & 18 GA. SHIM ONE

SIDE ONLY.

STEP 4

INSTALL ARMATURE

PLATE TO BRACKET

STEP 5

USING BAR (SEE STEP 1)

ADJUST ARMATURE PLATE

AS NEEDED FOR PROPER

ALIGNMENT BETWEEN

ARMATURE PLATE AND

EMLOCK SURFACE.

FRAME HEADER

GLASS DOOR

SIDE VIEW

GLASS DOOR

CLOSED

POSITION

Page 1 of 1

Hagerco 2950 Series - Magnetic Locks Installation guide

Hagerco 2950 Series - Magnetic Locks Installation guide

Hagerco 2950 Series - Magnetic Locks Installation guide

Related papers

Other documents