Bella Rocket Extract Pro Plus Multifunctional Blender Owner's manual

Category
Blenders
Type
Owner's manual

This manual is also suitable for

ROCKET EXTRACT PRO PLUS
BLENDER • MÉLANGEUR • LICUADORA
Instruction Manual
Manuel d’instructions
Manual de instrucciones
Register your product and get support at:
Pour vous inscrire et obtenir l’aide de votre produit:
Para registrar y obtener asistencia de su producto ir:
www.bellahousewares.com/welcome
SO-311573_14285 BELLA REPP Blender IM R1.indd 1 2014-05-14 12:42 PM
Table of Contents
Important Safeguards ........................................................................................................................................ 3
Additional Important Safeguards .....................................................................................................................4
Notes On The Plug.............................................................................................................................................. 4
Notes On The Cord ............................................................................................................................................4
Plasticizer Warning ............................................................................................................................................. 4
Electric Power......................................................................................................................................................4
Getting To Know Your Rocket Extract Pro Plus Blender Set ........................................................................5
Control Panel ................................................................................................................................................... 5-6
Processing Capacity Chart ................................................................................................................................ 7
Before Using for the First Time ........................................................................................................................7
Operating Instructions ....................................................................................................................................... 7
Blender Jar Assembly ........................................................................................................................................7
Blending/Chopping in the Blender Jar ............................................................................................................8
Blending/Chopping in the Tall or Short Tumble ............................................................................................. 8
User Maintenance Instructions .........................................................................................................................9
Care & Cleaning Instructions ............................................................................................................................ 9
Storing Instructions ............................................................................................................................................9
Troubleshooting ..................................................................................................................................................9
Recipes ............................................................................................................................................................... 10
Warranty ............................................................................................................................................................ 11
SO-311573_14285 BELLA REPP Blender IM R1.indd 1 2014-05-14 12:42 PM
3
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. READ ALL INSTRUCTIONS.
2. To protect against risk of electrical shock do not put cord, plugs, or appliance
in water or other liquid.
3. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
4. Close supervision is necessary when any appliance is used by or near children.
5. This Rocket Extract Pro Plus Blender Set is not a toy. Children should be supervised
to ensure they do not play with the appliance.
6. Unplug from outlet when not in use, before putting on or taking off attachments
or accessories, and before cleaning.
CAUTION: AVOID CONTACT WITH MOVING PARTS.
7. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or it is dropped, or has been damaged in any manner.
Contact Consumer Service for examination, repair or adjustment.
8. The use of attachments, including canning jars, not recommended by the
manufacturer may cause a risk of injury to persons.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surfaces, including the stove.
12. Blades are sharp. Handle carefully. Use the blade’s collar to handle.
13. Do not blend hot liquids.
14. Always completely assemble any of the 2 blade attachments: blending blade or
chopping blade, to the blender jar before adding food to be processed.
15. Always completely assemble any of the 2 blade attachments: blending blade or
chopping blade blade to the blender jar or to any tumbler before placing on the
motor base.
16. Never use the blender jar to process food without the lid and measuring cap
properly locked in place.
17. Never place any Rocket Extract Pro Plus Blender Set attachments or accessories
into a microwave oven.
18. Keep Hands and utensils out of container while blending to reduce the risk of
severe injury to persons or damange to the unit. A scraper may be used only
when the blender is not turned on.
19. Blades are sharp. Handle carefully.
20. Always Operate blender with cover in place.
21. Do not blend hot liquids
22. Never add to container while appliance is operating.
23. Container must be properly in place before operating appliance.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
SO-311573_14285 BELLA REPP Blender IM R1.indd 3 2014-05-14 12:42 PM
4
ADDITIONAL IMPORTANT
SAFEGUARDS
1. All users of this appliance must read and understand this Instruction Manual
before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC electrical outlet only.
3. If this appliance begins to malfunction during use, immediately press the STOP,
POWER, or active button (indicator light is illuminated).
4. If this appliance falls or accidentally becomes immersed in water, unplug it
immediately. Do not reach into the water!
5. Do not use this appliance after it has fallen into or becomes immersed in water.
6. To reduce the risk of injury to persons or property, never use this appliance in an
unstable position
7. Do not use this appliance for other than its intended use.
8. Do not use if the blender jar or tumbler is cracked or chipped.
IMPORTANT: Do not overll. Never ll beyond the Max Line on the blender jar
or any tumbler.
WARNING: Failure to add enough liquid before processing may cause the
Body Reset Blending Set blender jar or tumbler to break or chip.
WARNING: To avoid spills, make sure the lid is locked securely before pressing
any PRE-PROGRAMMED/SPEED buttons.
NOTES ON THE PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug will t in a polarized outlet only one way. If the
plug does not t fully into the outlet, reverse the plug. If it still does not t, contact a
qualied electrician. Do not modify the plug in any way.
NOTES ON THE CORD
The provided short power-supply cord should be used to reduce the risk resulting from
becoming entangled in or tripping over a longer cord. Do not use an extension cord
with this product.
PLASTICIZER WARNING
CAUTION: To prevent Plasticizers from migrating to the nish of the counter top or
table top or other furniture, place NON-PLASTIC coasters or place mats between the
appliance and the nish of the counter top or table top. Failure to do so may cause the
nish to darken; permanent blemishes may occur or stains can appear.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your appliance may not
operate properly. It should be operated on a separate electrical circuit from
other appliances.
SO-311573_14285 BELLA REPP Blender IM R1.indd 4 2014-05-14 12:42 PM
5
Getting To Know Your Rocket Extract Pro Plus Blender Set
Product may vary slightly from illustrations.
Control Panel
The control panel consists of the ON / OFF button, 2 SPEED buttons (LOW or HIGH) plus 8 PRE-PROGRAMMED
buttons. All buttons have indicator lights that illuminate when active.
1. ON / OFF
2. SMOOTHIE
3. PUREE
4. LIQUEFY
5. GRIND
6. HIGH
7. CHOP
8. PULSE
9. LOW
10. FROZEN DRINKS
11. ICE CRUSH
On / Off
Press to turn the blender ON.
Firmly press this button to power OFF the blender.
Tips: To stop midway through any blending operation, press the button with the illuminated light. To start
the blender again press any button and the program will re-start.
Polarized Plug
(not shown)
Non-skid Feet
FROZEN
DRINKS
PUREE
HIGH
LOW
GRIND
CHOP
LIQUEFY
PULSE
ICE
CRUSH
SMOOTHIE
Removable
Measuring Cap
Blender Jar Lid
Large (32 oz.)
Blender Jar
with Handle
Seal Ring
Blade Collar
Motor Base
Control Panel
2Tall (24 oz.) Tumblers 1 Short
(12 oz.) Tumbler
Tumbler Ring Travel Lid
w/ Sealed Spout
Storage Lids
Stainless Steel
Blending (Cross)
Blade
Stainless Steel
Chopping (Flat)
Blade
PUREE HIGH LOW
LIQUEFY
CHOP
FROZEN
DRINKS
GRIND PULSE
ICE
CRUSH
SMOOTHIE
Figure 2
SO-311573_14285 BELLA REPP Blender IM R1.indd 5 2014-05-14 12:42 PM
6
Smoothie
Pre-Programmed setting for smoothies, uniformly emulsies fruits & vegetables
for perfect consistency.
Press the SMOOTHIE button to begin. To be used with Blending Blade
Puree
Use this speed to puree fruits and vegetables into smooth and creamy foods. Prepare smooth soups,
avored hummus, pâs, as well as fresh and healthy baby food.
Press the PUREE button to begin. To be used with the Blending Blade.
Tips: When processing food, liquid is essential. Add small amounts of stock, yogurt, milk or water until
the desired consistency is reached.
Fruits containing high water content will need less or no liquids added.
Liquefy
Ideal speed for quickly blending fruits and vegetables.
When the LIQUEFY button is pressed, the blender will begin to blend with a lower speed, then
progressively increase speed to HIGH. To be used with the Blending Blade.
Grind
Use this for grinding harder, single ingredient items such as: coffee beans, nuts, cinnamon sticks.
Press GRIND button to begin. To be used with the Chopping Blade.
High
Use this speed to uniformly ne blend or chop thick fruits and vegetables.
Press the High button to begin processing. To be used with the Blending or Chopping Blade.
Chop
Use this speed to coarse or nely chop fruits, vegetables, cereals or cheese. Ideal for preparing fresh salsa
and guacamole.
When the CHOP button is pressed, the blender will CHOP 6 times, and then shut itself OFF. To be used
with the Chopping Blade.
Pulse
Use this button for short bursts of power or for coarse chopping and blending any food.
Press the PULSE button to begin the blending action. PULSE is activated as long as the button is held.
PULSE action will cease once the button is released. To be used with the Blending or Chopping Blade.
Time the pulses so that blades come to a complete stop before pulsing.
Low
Use this speed for lighter mixtures and creamy toppings. Ideal for mayonnaise or sauces.
Press LOW button to begin processing. To be used with the Blending or Chopping Blade.
Frozen Drinks
Use this speed to create frozen drinks or slushes
When the FROZEN DRINKS button is pressed it will PULSE to start then give a burst of high power
for several seconds and repeat this sequence three times before shutting off. Check contents and if
necessary, restart the function to reach the desired consistency.
Ice Crush
Use this speed to chop or crush ice.
When the ICE CRUSH button is pressed, the blender will PULSE 6 times, then blend continuously and
shuts itself OFF. Check contents. If necessary, to add more liquid and continue to process until all cubes
are reduced to the desired consistency. To be used with the Blending Blade
Tips:Remove ice cubes from freezer for 5 to 10 minutes before crushing.
Please consult the Processing Capacity Chart for suggested ice cubes and liquid to be added to the
blending jar, tall and short tumbler.
Add 1/2 cup water or other liquid.
WARNING: To avoid spills, make sure the lid is closed securely before pressing any PRE-PROGRAMMED/SPEED
buttons. Do not ll blending jar or any tumbler beyond the Max Line.
SO-311573_14285 BELLA REPP Blender IM R1.indd 6 2014-05-14 12:42 PM
7
Processing Capacity Chart
Description Size Capacity MAX Process Ice Cubes
Blender Jar Large 40 oz. 4 cups (32 oz.) 10 (2 cups) + 3/4 cup liquid
Tumblers (2), Tall 24 oz. 3 cups (24 oz.) 7 (1-1/2 cups) + 1/2 cup liquid
Tumbler (1) Short 12 oz. 1 cup+ (9 oz.) 5 (1-1/4 cups) + 1/4 cup
Before Using for the First Time
Carefully unpack the Rocket Extract Pro Plus Blender Set and remove all packaging materials.
Check the contents to ensure that all attachments and accessories are present (see Figure 1), and have been
received in good condition.
1. Handle all blade attachments: blending blade and chopping blade by their collars only.
WARNING: Do not touch blades. Blending and chopping blades are very sharp. Use extreme care when
handling. Failure to do so can result in personal injury.
2. Wash all accessories and attachments in warm, soapy water before rst use. Rinse thoroughly.
1 large (32 oz.) blender jar and lid with removable measuring cap
2 tall (24 oz.) tumblers and 1 short (12 oz.) tumbler
1 tumbler ring
1 storage lid
1 travel lid
2 blade attachments: blending and chopping.
3. Wipe the motor base with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
Operating Instructions
IMPORTANT! All blade attachments: blending blade
and chopping blade include a white plastic ring that
creates an airtight seal during processing (See Figure
3). Always check to be sure the white seal ring is
present and properly tted into the collar before use.
1. Place the motor base on a at, clean, dry counter
top or table.
2. Make sure the blender is unplugged.
3. Depending on the amount of food to be
processed, use the large (32 oz.) blender jar, any
tall (24 oz.) tumbler or the short (12 oz.) tumbler.
Blender Jar Assembly
1. Using the blade’s collar to handle, place any of
the 2 blade attachments: blending blade and
chopping blade into the base of the blender jar.
(See Figure 4.) Always check to be sure the ring is
present and properly tted into the collar before
use. Turn clockwise to tighten the blade assembly
until snug.
IMPORTANT: Make sure the blade assembly is
properly attached to the base of the blender jar
before adding food for processing.
2. Add food to be processed to the blender jar.
NOTE: When blending, foods or liquids tend to
expand as they rise up the side of the blending
jar. Do not ll blending jar more than the Max
Line, 4 cups (32 oz.) with food to be processed.
(Please consult the Processing Capacity Chart.)
3. WARNING: Never overll the blender jar. To avoid
or personal injury, leakage or damage to the
Rocket Extract Pro Plus Blender Set, do not ll
more than the Max Line.
4. WARNING: Pay close attention while processing.
Never operate the Rocket Extract Pro Plus Blender
when the blender jar is empty.
Figure 3
White seal
ring
Figure 4
Never ll blender
jar more than the
Max Line!
SO-311573_14285 BELLA REPP Blender IM R1.indd 7 2014-05-14 12:42 PM
8 8
Blending/Chopping in the Blender Jar
1. Make sure the measuring cap is rmly positioned
in the lid.
2. Add the blending jar lid onto the blender jar and
twist clockwise. An audible click can be heard as
the lid is locked and sealed.
Blending/Chopping in the Tall or
Short Tumbler
1. Add up to 3 cups (24 oz.) food to the tall tumbler
or 1+ cup (9 oz.) food to the short tumbler.
WARNING: Never overll the tall or short
tumbler. To avoid personal injury, leakage or
damage to the Rocket Extract Pro Plus Blender
Set, do not ll more than the Max Line. (Please
consult the Processing Capacity Chart.)
2. Holding any tumbler rmly in one hand, grasp the collar of any of the 2 blade attachments: blending blade
or chopping blade
Always check to be sure the ring is present and properly tted into the collar before use. Insert the blade
into the top of tumbler. (See Figure 5.) Use the other hand to tighten by turning the blade collar clockwise
until snug.
WARNING: Never operate the Rocket Extract Pro Plus Blender when the tumbler is empty.
IMPORTANT: Always add at least 1/4 to 1/2 cup liquid to food before processing. It may be necessary to
add more liquid, depending on the density of the food and the desired nal results.
3. Invert the tumbler assembly before placing on the motor base.
4. Insert the blade collar into the motor base,
tting the tabs into the slots on the motor base
(See Figure 6). Pressing the lid or tumbler rmly
down into the base, turn clockwise until the blade
attachment tabs lock securely in position.
5. Plug the power cord into a 120V AC electrical
outlet. Press the POWER button. The POWER
indicator light will illuminate.
WARNING: To avoid spills, make sure the lid
is closed securely before pressing any PRE-
PROGRAMMED/SPEED buttons.
6. Press the desired PRE-PROGRAMMED/SPEED
button to begin processing.
IMPORTANT: The Rocket Extract Pro Plus Blender will not operate unless the 3 locking tabs on the blade
collar are properly tted into the 3 slots on the motor base.
IMPORTANT! This Blender is equipped with a safety device that will cause control panel lights to ash
if the blade collar is not locked properly in position on the motor base. Press the STOP button and
adjust the blade collar. Reposition blade collar. Press any PRE-PROGRAMMED/SPEED button and resume
operation.
7. Press the lighted button to stop blending when desired consistency is reached. Check results and if
necessary, stir in liquid, water, juice (preferably organic) or stock (preferably organic) to thin puréed food
until the desired consistency is reached.
WARNING: Do not operate the motor continuously for more than 1 minute at a time. Allow the motor to
rest for 3 minutes before continuing. The motor will automatically shut off after a minute of continuous
use as a safety measure.
8. After processing food in the blender jar, turn the lid counter-clockwise to unlock and remove lid from
blender jar. (See Figure 4.) The spouted blender jar makes pouring easy.
9. After processing food in the tumbler, invert the cup/blade assembly. Hold the tumbler rmly in one hand.
Use the other hand to turn the blade collar counter-clockwise, and then lift blade attachment up and out of
the tumbler. (See Figure 5.)
10. Press the tumbler ring onto the lip of the tumbler to enjoy fresh processed juice, smoothies, or blended
drinks immediately.
11. Add the storage lid to store freshly processed food.
12. Unplug the Rocket Extract Pro Plus Blender when not in use and before cleaning.
Figure 5
Never ll any
tumbler more
than the Max
Line!
Figure 6
SO-311573_14285 BELLA REPP Blender IM R1.indd 8 2014-05-14 12:42 PM
9 9
User Maintenance Instructions
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself.
Contact a qualied appliance repair technician if the product requires servicing.
Care & Cleaning Instructions
CAUTION: Never immerse the motor base, plug or cord in water or any other liquid.
1. Always unplug the Rocket Extract Pro Plus Blender before cleaning.
2. Whenever possible, rinse attachments and accessories immediately after processing for both sanitary
reasons and to make cleanup easier.
3. Always handle blades using the blade collar.
CAUTION: Use extreme care when handling blades. Do not touch the blades with your ngers. The blades
are very sharp and can cause injury if touched.
IMPORTANT! All blade attachments: blending blade or chopping blade blade include a seal ring that
creates an airtight seal during processing. Always check to be sure the ring is present
and properly tted into the collar before use.
4. For quick clean-ups, ll the blender jar or any tumbler 1/4 full with clean, warm water. Following the steps
outlined in the Operating Instructions, process on LOW for 5 seconds. Rinse and dry thoroughly.
5. If necessary, soak blades in soapy water for 10 to 15 minutes. Use any small nylon bristle brush to remove
processed food from the blade and the blade area.
6. Wash all lids and tumbler rings in warm soapy water. Rinse and dry thoroughly.
CAUTION: Never use rough scouring pads or abrasive cleansers on any plastic or metal parts as the
surface may be damaged.
7. All attachments and accessories, except for the motor base, are top-rack only dishwasher safe.
8. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
Storing Instructions
1. Unplug and clean blender.
2. Store in original box or in a clean, dry place.
3. Never store the Rocket Extract Pro Plus Blender immediately after use or while it is plugged in.
4. Never wrap cord tightly around the appliance. Never place any stress on cord, especially where the cord
enters the motor base, as this could cause the cord to fray and break.
Troubleshooting
Problem Cause Solution
When a PRE-PROGRAMMED/
SPEED button is pressed,
all lights on the control panel
begin to ash. Rocket Extract
Pro Plus Blender will not
operate.
Blender jar or tumbler is
not correctly assembled
onto the motor base.
• Press the ON/OFF button to reset. Reposition blender jar or
tumbler. Align 3 locking tabs on the blade collar with 3 slots
on the motor base. Press down rmly on the blender jar lid or
tumbler and turn clockwise until the tabs lock into position.
Press any PRE-PROGRAMMED/SPEED button to
resume operation.
The blender motor rotates very
slowly.
Blender jar or tumbler is
overloaded.
• Remove some food from the tumbler or the blender jar and
continue blending.
Add liquid to the blender jar or tumbler and continue blending.
Ingredients are not mixing
together well.
Heavier ingredients have
fallen to the bottom.
• If necessary, remove blender jar or tumbler and shake
ingredients to re-distribute. Continue blending.
If the puree is still not blended smoothly, it may be necessary
to add liquid to the blender jar or tumbler and continue blending.
The Rocket Extract Pro Plus
Blender has stopped operating.
All control panel lights are
ashing.
• A hard or brous
ingredient, such as a chunk
of carrot or celery can
get stuck in the blade and
prevent it from turning.
The motor is overheated.
• Remove the blade attachment and remove any debris,
if necessary. Stir food and replace blade.
• Allow the Rocket Extract Pro Plus Blender to rest for at least
3 minutes. Then replace blender jar or tumbler and continue
blending.
SO-311573_14285 BELLA REPP Blender IM R1.indd 9 2014-05-14 12:42 PM
10
Fresh Strawberry Smoothie for One
Makes: 1 Serving
large fresh strawberries, trimmed, cut in half
6 oz. vanilla yogurt
3 ice cubes
1. Assemble short tumbler with the blending (cross) blade.
2. Add all ingredients to the short tumbler.
3. Press the SMOOTHIE button and process until the mixture is the blended to a creamy smooth
consistency. Mix well.
4. Add a tumbler ring and enjoy!
Pineapple Salsa
Yield: 3 cups
1 Roma tomato, quartered
1/2 jalapeno pepper, deveined, seeded and chopped
1/2 cup red onion, peeled and chopped
1 cup pineapple, in large chunks
1 cup fresh cilantro
1. Assemble blending jar or tall tumbler with the chopping (at) blade.
2. Place ingredients, starting with the tomatoes, into the blender jar. Layer the cilantro and the
remainder of ingredients and secure lid.
3. Press the CHOP button. The blender will CHOP 6 times, and then shut itself OFF. When the
blender comes to a complete stop, use a long spoon to scrape down the sides of the blender jar
and mix well.
4. PULSE until the mixture is the desired consistency. Mix well.
Recipes
SO-311573_14285 BELLA REPP Blender IM R1.indd 10 2014-05-14 12:42 PM
14
Limited TWO-YEAR Warranty
SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date
of purchase, this product will be free from mechanical defects in material and
workmanship, and for 90 days in respect to non-mechanical parts. At its sole
discretion, SENSIO Inc. will either repair or replace the product found to be defective,
or issue a refund on the product during the warranty period.
The warranty is only valid for the original retail purchaser from the date of initial retail
purchase and is not transferable. Keep the original sales receipt, as proof of purchase is
required to obtain warranty validation. Retail stores selling this product do not have the
right to alter, modify, or in any way revise the terms and conditions of the warranty.
EXCLUSIONS:
The warranty does not cover normal wear of parts or damage resulting from any of the
following: negligent use of the product, use of improper voltage or current, improper
routine maintenance, use contrary to the operating instructions, disassembly, repair,
or alteration by anyone other than qualied SENSIO Inc. personnel. Also, the warranty
does not cover Acts of God such as re, oods, hurricanes, or tornadoes.
SENSIO Inc. shall not be liable for any incidental or consequential damages caused
by the breach of any express or implied warranty. Apart from the extent prohibited
by applicable law, any implied warranty of merchantability or tness for a particular
purpose is limited in time to the duration of the warranty. Some states, provinces or
jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, and therefore, the
above exclusions or limitations may not apply to you. The warranty covers specic
legal rights which may vary by state, province and/or jurisdiction.
HOW TO OBTAIN WARRANTY SERVICE:
You must contact Customer Service at our toll-free number: 1-866-832-4843.
A Customer Service Representative will attempt to resolve warranty issues over the
phone. If the Customer Service Representative is unable to resolve the problem, you will
be provided with a case number and asked to return the product to SENSIO Inc. Attach
a tag to the product that includes: your name, address, daytime contact telephone
number, case number, and description of the problem. Also, include a copy of the
original sales receipt. Carefully package the tagged product with the sales receipt,
and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. SENSIO
Inc. shall bear no responsibility or liability for the returned product while in transit to
SENSIO Inc.’s Customer Service Center.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Bella Rocket Extract Pro Plus Multifunctional Blender Owner's manual

Category
Blenders
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI