ProForm PFEX15917 User guide

Brand: ProForm

Model: PFEX15917

Category: Fitness, gymnastics & weight training

Type: User guide

ProForm PFEX15917 is a versatile exercise bike designed to provide an effective and enjoyable workout experience in the comfort of your home. Its sturdy construction and ergonomic design ensure a stable and comfortable ride, while the variety of features it offers allows you to tailor your workouts to your fitness goals and preferences. The PFEX15917 comes equipped with a large LCD console that displays essential workout metrics such as time, distance, speed, calories burned, and heart rate, enabling you to track your progress and stay motivated.

Serial Number

Decal

CAUTION

Read all precautions and

instructions in this manual before

using this equipment. Keep this

manual for future reference.

Model No. PFEX15917.1

Serial No.

Write the serial number in the space

above for reference.

proform.com

USER’S MANUAL

To register your product and

activate your warranty today,

go to my.proform.com.

For service at any time, go to

proformservice.com.

Or call 1-888-533-1333

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–12 p.m. MT

Please do not contact the store.

ACTIVATE YOUR

WARRANTY

CUSTOMER CARE

WARNING DECAL PLACEMENT

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS ..................................................................3

BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO USE THE EXERCISE BIKE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

MAINTENANCE AND TROUBLESHOOTING ....................................................21

FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

EXERCISE GUIDELINES ....................................................................23

PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

ORDERING REPLACEMENT PARTS .................................................. Back Cover

LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

This drawing shows the location(s) of the warning

decal(s). If a decal is missing or illegible, see

the front cover of this manual and request a

free replacement decal. Apply the decal in the

location shown. Note: The decal(s) may not be

shown at actual size.

PROFORM and IFIT are registered trademarks of ICON Health & Fitness, Inc. App Store is a trademark of Apple

Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc. The

BLUETOOTH

word mark and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your exercise bike before using your exercise bike.

ICON assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

1. It is the responsibility of the owner to

ensure that all users of the exercise bike are

adequately informed of all precautions.

2. Before beginning any exercise program,

consult your physician. This is especially

important for persons over age 35 or persons

with pre-existing health problems.

3. The exercise bike is not intended for use by

persons with reduced physical, sensory, or

mental capabilities or lack of experience and

knowledge, unless they are given supervi-

sion or instruction about use of the exercise

bike by someone responsible for their safety.

4. Use the exercise bike only as described in

this manual.

5. The exercise bike is intended for home use

only. Do not use the exercise bike in a com-

mercial, rental, or institutional setting.

6. Keep the exercise bike indoors, away from

moisture and dust. Do not put the exercise

bike in a garage or covered patio, or near

water.

7. Place the exercise bike on a level surface,

with a mat beneath it to protect the floor or

carpet. Make sure that there is at least 2 ft.

(0.6 m) of clearance around the exercise bike.

8. Inspect and properly tighten all parts each

time the exercise bike is used. Replace any

worn parts immediately.

9. Keep children under age 13 and pets away

from the exercise bike at all times.

10. Wear appropriate clothes while exercising;

do not wear loose clothes that could become

caught on the exercise bike. Always wear

athletic shoes for foot protection.

11. The exercise bike should not be used

by persons weighing more than 350 lbs.

(159 kg).

12. Be careful when mounting and dismounting

the exercise bike.

13. Always keep your back straight while using

the exercise bike; do not arch your back.

14. The heart rate monitor is not a medical

device. Various factors may affect the accu-

racy of heart rate readings. The heart rate

monitor is intended only as an exercise aid in

determining heart rate trends in general.

15. Over exercising may result in serious injury

or death. If you feel faint, if you become short

of breath, or if you experience pain while

exercising, stop immediately and cool down.

all

STANDARD SERVICE PLANS

BEFORE YOU BEGIN

Thank you for selecting the new PROFORM

440 ES

exercise bike. Cycling is an effective exercise for

increasing cardiovascular fitness, building endurance,

and toning the body. The 440 ES exercise bike pro-

vides a selection of features designed to make your

workouts at home more effective and enjoyable.

For your benefit, read this manual carefully before

you use the exercise bike. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Handlebar

Console

Wheel

Seat

Backrest

Pedal/Strap

Leveling Foot

Accessory Tray

Fan

Heart Rate Monitor

Adjustment Handle

Handle

Length: 4 ft. 11 in. (150 cm)

Width: 1 ft. 10 in. (56 cm)

Tablet Holder

M10 x 120mm Screw (44)–2

M10 x 20mm

Screw (60)–4

M10 x 96mm Screw (110)–2

M8 x 13mm

Screw (94)–6

M8 x 38mm

Screw (56)–4

M8 x 50mm Bolt

(49)–2

M6 x 30mm

Screw (51)–4

M6 x 18mm

Screw (67)–4

M6 x 50mm Screw

(42)–1

M8 Locknut

(102)–2

M6 Washer

(112)–8

M4 x 15mm

Screw (63)–6

Tablet Holder

Screw (115)–4

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the

key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it

has been preassembled. Extra parts may be included.

• To hire an authorized service technician to

assemble this product, call 1-800-445-2480.

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you nish all assembly steps.

• Left parts are marked “L” or “Left” and right parts

are marked “R” or “Right.”

• To identify small parts, see page 6.

In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one adjustable wrench

Assembly may be easier if you have a set of

wrenches. To avoid damaging parts, do not use

power tools.

ASSEMBLY

2. If there are shipping bracket(s) on the front and

rear of the Frame (1), remove and discard the

shipping bracket(s) and the hardware attaching

them.

With the help of a second person, place some

of the packing materials (not shown) under the

front of the Frame (1).

Attach the Front Stabilizer (2) to the Frame (1)

with two M10 x 96mm Screws (110); start both

Screws, and then tighten them.

Then, remove the packing material from under

the Frame (1).

110

1. Go to my.proform.com on your computer and

• documents your ownership

• activates your warranty

• ensures priority customer support if assistance

is ever needed

Note: If you do not have internet access, call

Customer Care (see the front cover of this

manual) and register your product.

3. With the help of a second person, place some of

the packing materials (not shown) under the rear

of the Frame (1).

Attach the Rear Stabilizer (3) to the Frame (1)

with two M10 x 120mm Screws (44); start both

Screws, and then tighten them.

Then, remove the packing material from under

the Frame (1).

4. Have a second person hold the Upright (4) on

the Frame (1).

Tip: Avoid pinching the Main Wire (41). Attach

the Upright (4) with four M10 x 20mm Screws

(60); start all the Screws, and then tighten

them.

Next, locate the wire tie (A) inside the Upright

(4). Tie the lower end of the wire tie to the Main

Wire (41). Then, pull the other end of the wire tie

upward until the Main Wire is routed through the

Upright.

Tip: To prevent the Main Wire (41) from falling

into the Upright (4), secure it to the Upright

with the wire tie (A).

5. Slide the Upright Cover (19) onto the Upright

(4) and press it onto the Left and Right Shields

(21, 22).

21, 22

Avoid pinching the

Main Wire (41)

6. Attach the Accessory Tray (9) to the Upright (4)

with an M6 x 50mm Screw (42).

7. Untie and discard the wire tie on the Main

Wire (41).

While a second person holds the Console

Bracket (82) near the Upright (4), route the

Main Wire (41) through the notch in the Upright,

through the Upright Bracket (84), and through

the hole in the center of the Console Bracket.

Tip: Avoid pinching the Main Wire (41). Insert

the Upright Bracket (84) into the Upright (4).

Attach the Upright Bracket (84) with two

M8 x 50mm Bolts (49) and two M8 Locknuts

(102); start both Bolts, and then tighten them.

Make sure that the Locknuts are in the hex-

agonal holes (B).

8. Identify the Right Handlebar (81) and orient it as

shown.

Tip: Avoid pinching the Right Pulse Wire

(8). Attach the Right Handlebar (81) to the right

side of the Console Bracket (82) with three

M8 x 13mm Screws (94); start all the Screws,

and then tighten them.

Then, route the Right Pulse Wire (8) in the Right

Handlebar (81) through the Console Bracket (82)

as shown.

Repeat this step to attach the Left

Handlebar (6).

102

Avoid pinching

the Main Wire (41)

Avoid pinching

the wires

9. IMPORTANT: Turn the Adjustment Knob (83)

until the Console Bracket (82) is in the most

vertical position.

While a second person holds the Console (5)

near the Console Bracket (82), connect the wires

on the Console to the Main Wire (41) and to the

Left and Right Pulse Wires (7, 8).

Insert the excess wire into the Console

Bracket (82).

Tip: Avoid pinching the wires. Attach the

Console (5) to the Console Bracket (82) with four

M4 x 15mm Screws (63); start all the Screws,

and then tighten them.

7, 8

Avoid pinching

the wires

10. Identify the Upper and Lower Bracket Covers

(20, 80), orient them as shown, and press them

together around the Console Bracket (82).

Tip: Avoid pinching the Left and Right Pulse

Wires (7, 8). Attach the Upper and Lower

Bracket Covers (20, 80) to the Console Bracket

(82) with two M4 x 15mm Screws (63).

Avoid

pinching the

Pulse Wires

(7, 8)

11. Attach the Seat Handlebar (18) to the Seat

Carriage (11) with four M8 x 38mm Screws (56);

start all the Screws, and then tighten them.

12. Slide the Backrest Frame (14) onto the Seat

Handlebar (18).

Attach the Backrest Frame (14) with four

M6 x 30mm Screws (51) and four M6 Washers

(112); start all the Screws, and then tighten

them.

112

13. Attach the Seat (12) to the Seat Handlebar (18)

with four M6 x 18mm Screws (67) and four M6

Washers (112) (only two of each are shown);

start all the Screws, and then tighten them.

14. Identify the Right Pedal (29).

Using an adjustable wrench, firmly tighten the

Right Pedal (29) clockwise into the Right Crank

Arm (99).

Firmly tighten the Left Pedal (not shown)

counterclockwise into the Left Crank Arm

(not shown). IMPORTANT: You must turn the

Left Pedal counterclockwise to attach it.

Then, attach the right pedal strap to the Right

Pedal (29) as shown. Attach the left pedal

strap in the same way.

16. After the exercise bike is assembled, inspect

it to make sure that it is assembled correctly,

that it functions properly, and that all parts

are properly tightened. Place a mat under the

exercise bike to protect the floor or carpet. Note:

Extra parts may be included.

Next, plug the Power Adapter (107) into the

receptacle on the front of the exercise bike.

Then, plug the Power Adapter (107) into an

outlet (see HOW TO PLUG IN THE POWER

ADAPTER on page 14).

107

114

115

15. Attach the Tablet Holder (114) to the Console (5)

with four Tablet Holder Screws (115); start all

the Tablet Holder Screws, and then tighten

them.

17. IMPORTANT: You must activate your Console

(5) to begin using its exclusive features.

First, press any button on the Console (5) to turn

on the power.

Then, using your smart phone or tablet, go to

iFit.com/activate and follow the instructions to

activate the Console (5).

Note: If you do not have a smart phone or tablet,

use your computer to go to iFit.com/activate for

an alternate way to activate the Console (5). If

you do not have a computer, call Customer Care

(see the front cover of this manual).

HOW TO PLUG IN THE POWER ADAPTER

IMPORTANT: If the exercise bike has been exposed

to cold temperatures, allow it to warm to room

temperature before you plug in the power adapter.

If you do not do this, you may damage the console

displays or other electronic components.

Plug the power

adapter into the

receptacle on the

front of the exercise

bike. Then, plug

the power adapter

into an appropri-

ate outlet that is

properly installed

in accordance with

all local codes and

ordinances.

HOW TO MOVE THE EXERCISE BIKE

To move the exercise

bike, hold the handle

(B) on the rear stabi-

lizer and carefully lift

it until the exercise

bike can be moved

on the front wheels.

Carefully move the

exercise bike to the

desired location and

then lower it.

HOW TO ADJUST THE SEAT

The seat can be

adjusted forward

or backward to the

position that is the

most comfortable. To

adjust the seat, push

downward on the

adjustment handle

(C), slide the seat to

the desired position,

and then pull upward

on the adjustment

handle to lock the seat in place.

HOW TO ADJUST THE PEDAL STRAPS

To tighten a pedal

strap, pull downward

on the end of the

strap. To loosen a

strap, press the tab

(D) and pull upward

on the strap.

HOW TO ADJUST THE ANGLE OF THE CONSOLE

The console can be

adjusted to several

angles. To adjust

the console, turn the

console knob (E) until

the console is at the

desired angle.

HOW TO LEVEL THE EXERCISE BIKE

If the exercise bike

rocks slightly on your

floor during use,

turn one or both of

the leveling feet (F)

beneath the rear

stabilizer until the

rocking motion is

eliminated.

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder (G) is designed

for use with most full-size tablets. Do not place

any other electronic device or object in the tablet

holder.

To insert a tablet into

the tablet holder (G),

set the bottom edge

of the tablet in the

tray. Then, pull the

clip over the top edge

of the tablet. Make

sure that the tablet

is firmly secured in

the tablet holder.

Rotate the tablet

holder to the desired angle. Reverse these actions to

remove the tablet from the tablet holder.

HOW TO USE THE EXERCISE BIKE

Scott

EBPF15917

PFEX15917

FEATURES OF THE CONSOLE

IMPORTANT: To activate your console and begin

using its exclusive features, see assembly step 17

on page 13.

The advanced console offers an array of features

designed to make your workouts more effective and

enjoyable.

When you use the manual mode of the console, you

can change the resistance of the pedals with the touch

of a button.

While you exercise, the console will display continu-

ous exercise feedback. You can also measure your

heart rate using the handgrip heart rate monitor or

a compatible heart rate monitor. See page 20 for

information about purchasing an optional chest

heart rate monitor.

You can also connect your tablet to the console and

use the iFit

Bluetooth Tablet app to record and track

your workout information.

The console also offers a selection of onboard

workouts. Each workout automatically changes the

resistance of the pedals as it guides you through an

effective workout.

You can even connect your personal audio player to

the console sound system and listen to your favorite

music or audio books while you exercise.

To use the manual mode, see page 16. To use an

onboard workout, see page 18. To connect your

tablet to the console, see page 19. To connect

your heart rate monitor to the console, see page

19. To use the sound system, see page 20. To

change console settings, see page 20.

Note: If there is a sheet of plastic on the display,

remove the plastic.

Note: The console can display speed and distance

in either miles or kilometers. To change the unit of

measurement, press the St/Met button repeatedly. For

simplicity, all instructions in this section refer to miles.

CONSOLE DIAGRAM

HOW TO USE THE MANUAL MODE

1. Begin pedaling or press any button on the

console to turn on the console.

When you turn on the console, the display will turn

on. The console will then be ready for use.

2. Select the manual mode.

Press the Manual Control button to select the

manual mode.

3. Change the resistance of the pedals as desired.

As you pedal, change the resistance of the pedals

by pressing the Quick Resistance increase and

decrease buttons or by pressing one of the num-

bered Quick Resistance buttons.

Note: After you press a button, it will take a

moment for the pedals to reach the selected

resistance level.

4. Follow your progress with the displays.

The display can show the following workout

information:

Calories (flame icon)—When the manual mode

is selected, this display will show the approximate

number of calories you have burned. When an

onboard workout is selected, this display will show

either the approximate number of calories remain-

ing to be burned or the approximate number of

calories you have burned.

Calories per Hour (Cals/Hr)—This display will

show the approximate number of calories you are

burning per hour.

Distance—This display will show the distance that

you have pedaled in miles (mi) or kilometers (km).

Pulse (BPM)—This display will show your heart

rate in beats per minute (bpm) when you use the

handgrip heart rate monitor or the optional chest

heart rate monitor (see step 5).

Pulse Average (BPM AVG)—This display will

show your average heart rate in beats per minute

(bpm) when you use the handgrip heart rate moni-

tor or the optional chest heart rate monitor (see

step 5).

Resistance—This display will show the resistance

level of the pedals for a few seconds each time the

resistance level changes.

RPM—This display will show your pedaling speed

in revolutions per minute (rpm).

RPM Average (RPM AVG)—This display will show

your average pedaling speed in revolutions per

minute (rpm).

Speed—This display will show your pedaling

speed in miles per hour or kilometers per hour. To

change the unit of measurement, press the St/Met

button repeatedly

Time—When the manual mode is selected, this

display will show the elapsed time. When an

onboard workout is selected, this display will show

either the time remaining in the workout or the

elapsed time.

Watts—This display will show your approximate

power output in watts.

Average Watts (AVG)—This display will show your

approximate average power output in watts for the

workout.

Scan Mode and Priority

Mode—The calories and watts

displays will appear in an

alternating cycle (scan mode).

To select either the calories

display or the watts display for continuous display

(priority mode), press the increase or decrease

button next to the Enter button repeatedly until

the desired display appears. To return to the scan

mode, press the increase button repeatedly until

the word SCAN appears.

Press the Home button to exit the workout and

return to the main menu. If necessary, press the

Home button again.

Press the End/Summary button to end the work-

out and view a workout summary. The workout

summary will appear in the displays for several

seconds.

Change the volume level of

the console by pressing the

volume increase and decrease

buttons.

5. Measure your heart rate if desired.

You can measure your heart rate using either the

handgrip heart rate monitor or an optional chest

heart rate monitor (see page 20 for infor-

mation about the optional chest heart rate

monitor). Note: The console is compatible with

BLUETOOTH

Smart heart rate monitors.

Note: If you use both heart rate monitors at the

same time, the chest heart rate monitor will

have priority.

If there are

sheets of plastic

on the metal

contacts (A) on

the handgrip

heart rate moni-

tor, remove the

plastic. To mea-

sure your heart

rate, hold the

handgrip heart

rate monitor with your palms resting against the

contacts. Avoid moving your hands or gripping

the contacts tightly.

When your pulse is detected, your heart rate will

appear in the display. For the most accurate

heart rate reading, hold the contacts for at least

15 seconds.

6. Turn on the fan if desired.

The fan has several speed

settings, including an auto

mode. While the auto mode

is selected, the speed of the

fan will automatically increase or decrease as your

exercise intensity increases or decreases. Press

the fan increase and decrease buttons repeatedly

to select a fan speed or to turn off the fan.

Note: If the pedals do not move for about 30

seconds, the fan will turn off automatically.

7. When you are finished exercising, the console

will turn off automatically.

If the pedals do not move for several seconds, the

console will pause and the time will flash in the

display. To resume your workout, simply resume

pedaling.

If the pedals do not move for several minutes and

the buttons are not pressed, the console will turn

off and the display will be reset.

HOW TO USE AN ONBOARD WORKOUT

1. Begin pedaling or press any button on the

console to turn on the console.

When you turn on the console, the display will turn

on. The console will then be ready for use.

2. Select an onboard workout.

To select an onboard workout, press the desired

Onboard Workouts button repeatedly until the

desired workout appears in the display.

When you select an onboard workout, the display

will show the name of the workout and the dura-

tion of the workout or the number of calories to be

burned.

The maximum speed and the maximum resistance

level for the workout will also appear in the display.

3. Begin pedaling to start the workout.

Each workout is divided into one-minute seg-

ments. One resistance level and one target speed

is programmed for each segment. Note: The same

resistance level and/or target speed may be pro-

grammed for consecutive segments.

If a different resistance level and/or target speed is

programmed for the next segment of the workout,

the resistance level and/or target speed will appear

in the display for a few seconds to alert you. The

resistance of the pedals will then change.

As you exercise, keep your pedaling speed near

the target speed for the current segment.

IMPORTANT: The target speed is intended only

to provide motivation. Your actual pedaling

speed may be slower than the target speed.

Make sure to pedal at a speed that is comfort-

able for you.

If the resistance level for the current segment is

too high or too low, you can manually override the

setting by pressing the Quick Resistance buttons.

IMPORTANT: When the current segment of the

workout ends, the pedals will automatically

adjust to the resistance level programmed for

the next segment.

The workout will continue in this way until the last

segment ends. To pause the workout at any time,

stop pedaling. The time will flash in the display. To

resume the workout, simply resume pedaling.

To end the workout, press the End/Summary but-

ton. A summary of the workout will appear in the

displays for several seconds.

4. Follow your progress with the displays.

See step 4 on page 16.

5. Measure your heart rate if desired.

See step 5 on page 17.

6. Turn on the fan if desired.

See step 6 on page 17.

7. When you are finished exercising, the console

will turn off automatically.

See step 7 on page 17.

HOW TO CONNECT YOUR TABLET TO THE

CONSOLE

The console supports BLUETOOTH connections to

tablets via the iFit Bluetooth Tablet app and to compat-

ible heart rate monitors. Note: Other BLUETOOTH

connections are not supported.

1. Download and install the iFit Bluetooth Tablet

app on your tablet.

On your iOS

or Android™ tablet, open the App

Store℠ or the Google Play™ store, search for

the free iFit Bluetooth Tablet app, and then install

the app on your tablet. Make sure that the

BLUETOOTH option is enabled on your tablet.

Then, open the iFit Bluetooth Tablet app and follow

the instructions to set up an iFit account and cus-

tomize settings.

2. Connect your heart rate monitor to the console

if desired.

If you are connecting both your heart rate monitor

and your tablet to the console, you must connect

your heart rate monitor before you connect

your tablet. See HOW TO CONNECT YOUR

HEART RATE MONITOR TO THE CONSOLE at

the right.

3. Connect your tablet to the console.

Press the iFit Sync button on the console; the

console pairing number will appear in the display.

Then, follow the instructions in the iFit Bluetooth

Tablet app to connect your tablet to the console.

When a connection is established, the LED on the

console will turn solid blue.

4. Record and track your workout information.

Follow the instructions in the iFit Bluetooth Tablet

app to record and track your workout information.

5. Disconnect your tablet from the console if

desired.

To disconnect your tablet from the console, first

select the disconnect option in the iFit Bluetooth

Tablet app. Then, press and hold the iFit Sync

button on the console until the LED on the console

turns solid green.

Note: All BLUETOOTH connections between

the console and other devices (including any

tablets, heart rate monitors, and so forth) will be

disconnected.

HOW TO CONNECT YOUR HEART RATE MONITOR

TO THE CONSOLE

The console is compatible with all BLUETOOTH Smart

heart rate monitors.

To connect your BLUETOOTH Smart heart rate moni-

tor to the console, press the iFit Sync button on the

console; the console pairing number will appear in the

display. When a connection is established, the LED on

the console will flash red twice.

Note: If there is more than one compatible heart rate

monitor near the console, the console will connect to

the heart rate monitor with the strongest signal.

To disconnect your heart rate monitor from the console,

press and hold the iFit Sync button on the console until

the LED on the console turns solid green.

Note: All BLUETOOTH connections between the

console and other devices (including any tablets, heart

rate monitors, and so forth) will be disconnected.

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console

sound system while you exercise, plug a 3.5 mm male

to 3.5 mm male audio cable (not included) into the

jack on the console and into a jack on your personal

audio player; make sure that the audio cable is fully

plugged in. Note: To purchase an audio cable, see

your local electronics store.

Next, press the play button on

your personal audio player. Adjust

the volume level using the volume

increase and decrease buttons on

the console or the volume control

on your personal audio player.

THE OPTIONAL CHEST HEART RATE MONITOR

Whether your

goal is to

burn fat or to

strengthen your

cardiovascular

system, the key

to achieving the

best results is

to maintain the

proper heart

rate during your

workouts. The optional chest heart rate monitor will

enable you to continuously monitor your heart rate

while you exercise, helping you to reach your personal

fitness goals. To purchase a chest heart rate moni-

tor, please see the front cover of this manual.

Note: The console is compatible with all BLUETOOTH

Smart heart rate monitors.

HOW TO CHANGE CONSOLE SETTINGS

1. Select the settings mode.

To select the settings mode, press the gear button.

The settings information will appear in the display.

2. Navigate the settings mode.

While the settings mode is selected, the display will

show several optional screens. Press the increase

and decrease buttons near the Enter button

repeatedly to select the desired optional screen.

The lower section of the display will show

instructions for the selected screen. Make sure to

follow the instructions shown in the lower part

of the display.

3. Change settings as desired.

Units—The currently selected unit of measurement

will appear in the display. To change the unit of

measurement, press the Enter button repeatedly.

To view distance in miles, select ENGLISH. To view

distance in kilometers, select METRIC.

Contrast Level—The currently selected contrast

level will appear in the display. Press the Quick

Resistance increase and decrease buttons to

adjust the contrast level.

Usage Information—The display will show the

total number of hours that the exercise bike has

been used and the total distance (in miles or

kilometers) that has been pedaled on the exercise

bike.

4. Exit the settings mode.

Press the gear button to exit the settings mode.

Page is loading ...

ProForm PFEX15917 User guide

Brand: ProForm

Model: PFEX15917

Category: Fitness, gymnastics & weight training

Type: User guide

Download PDF

report

ProForm PFEX15917 User guide

ProForm PFEX15917 User guide

Related papers

Other documents