Legrand Contain-IT FLEX Single Sliding Door Installation guide

Type
Installation guide

Legrand Contain-IT FLEX Single Sliding Door is a versatile and adjustable containment system, designed to enhance the efficiency and organization of your IT environment. This system offers several key features and capabilities:

Adjustable Height: The door comes in various heights, allowing you to customize it based on the size and height of your cabinets.

Accommodating Aisle Widths: The door is suitable for aisles ranging from 32" to 36" wide, providing flexibility in your data center layout.

Compatibility: The door is compatible with all cabinet makes, as long as they have appropriate mounting points and sufficient depth to accommodate the side panels. It is particularly well-suited for use with Legrand cabinets.

Legrand Contain-IT FLEX Single Sliding Door is a versatile and adjustable containment system, designed to enhance the efficiency and organization of your IT environment. This system offers several key features and capabilities:

Adjustable Height: The door comes in various heights, allowing you to customize it based on the size and height of your cabinets.

Accommodating Aisle Widths: The door is suitable for aisles ranging from 32" to 36" wide, providing flexibility in your data center layout.

Compatibility: The door is compatible with all cabinet makes, as long as they have appropriate mounting points and sufficient depth to accommodate the side panels. It is particularly well-suited for use with Legrand cabinets.

designed to be better.
Contain-IT FLEX
Aisle Containment System
Single LH or RH Sliding Door
Contain-IT FLEX Containmentwww.legrand.US/ortronics
2
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
3
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
4
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
5
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
6
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
7
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
8
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
9
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
10
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
11
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
12
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
13
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
14
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
15
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
16
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
17
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
18
Part Number: 71601934 rev 00
Contain-IT FLEX Containmentwww.legrand.US/ortronics
19
Part Number: 71601934 rev 00
A. Important facts to know:
1. Containment Doors are available in several heights. Choice of door height
is depended on the height and size of the cabinets being used.
2. Aisle widths encountered can also affect the door widths needed. Single
Sliding Doors can accommodate 32” to 36” wide aisles. A single 36” wide
door may be best for smaller aisle widths of 36” or less.
3. Single Sliding Containment Doors come in 5 standard nominal heights,
each of which increase in 3.5” increments.
4. Containment doors can be used for all makes of cabinets as long as there
are mounting points available on top of the cabinet and the cabinet is deep
enough to hold the side panels without protruding out the rear. They are
designed best to work with Legrand cabinets.
5. Door opening width for Single Doors is approximately 35” wide.
6. Clear door insert panels come in either .125” thick polycarbonate or 8mm
thick double wall “Polygal”, UL rated plastics. Cleaning of plastic surfaces
is done by using a soft cotton cloth with a mild soapy dish water solution.
Prevent scratching of plastic surfaces and do not use reactive chemicals.
7. There are five basic types of containment doors available.
a. Dual Sliding doors with double 24”W doors for cabinet to cabinet layouts.
b. Single left or right 36”W Sliding Doors for cabinet to cabinet layouts.
c. Single left or right 36”W Sliding Doors for cabinet to wall layouts.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Legrand Contain-IT FLEX Single Sliding Door Installation guide

Type
Installation guide

Legrand Contain-IT FLEX Single Sliding Door is a versatile and adjustable containment system, designed to enhance the efficiency and organization of your IT environment. This system offers several key features and capabilities:

Adjustable Height: The door comes in various heights, allowing you to customize it based on the size and height of your cabinets.

Accommodating Aisle Widths: The door is suitable for aisles ranging from 32" to 36" wide, providing flexibility in your data center layout.

Compatibility: The door is compatible with all cabinet makes, as long as they have appropriate mounting points and sufficient depth to accommodate the side panels. It is particularly well-suited for use with Legrand cabinets.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI