Legrand S120/277C-P Auxiliary Relay Pack Form C Installation guide

Legrand
Brand
Legrand
Model
S120/277C-P Auxiliary Relay Pack Form C
Type
Installation guide

This manual is also suitable for

S120/277C-P
Auxiliary Relay Pack
Form C
Installation Instructions
www.wattstopper.com
Santa Clara, CA 95050
Technical Support: 800.879.8585
11792r1
CAUTION
TURN POWER OFF AT THE CIRCUIT BREAKER BEFORE
INSTALLING POWER PACKS OR AUXILIARY RELAY PACKS.
ONLY QUALIFIED ELECTRICIANS SHOULD INSTALL THIS UNIT.
The relay pack attaches to existing junction boxes.
All low voltage wiring should be at
least 22 gauge wire. All high
voltage connections should be at
least 14 gauge. Always check local
building codes. After initial wiring is
complete, verify that all wiring is correct.
Improper wiring can damage the relay pack,
power pack, lighting system and occupancy
sensor.
RELAY PACK
MAKE HIGH VOLTAGE
CONNECTIONS INSIDE
J-BOX
Normally Open (RED)
Common (BRN)
Normally Closed (BLU)
(High Voltage) (Low Voltage)
COM (BLK)
SW (BLU)
120/277VAC Form C Auxiliary Relay Pack
General Purpose: (120 & 277) 20A NO/20A NC
Fluorescent Load: (120 & 277) 20A NO/10A NC
Incandescent Load: (120) 15A NO/2A NC
Motor Load: (120) 1 HP NO/1 HP NC, (277) 2 HP NO/2 HP NC
  • Page 1 1

Legrand S120/277C-P Auxiliary Relay Pack Form C Installation guide

Legrand
Brand
Legrand
Model
S120/277C-P Auxiliary Relay Pack Form C
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents