2. Nostalgic Warehouse
  3. 708244
708244

Nostalgic Warehouse 708244 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Nostalgic Warehouse 708244 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
USE INCLUDED DOOR PREPARATION
TEMPLATE FOR NON-PREPPED DOORS.
USE INCLUDED PLASTIC TEMPLATE TO
LOCATE AND DRILL THE 1/4” BOTTOM GRIP
MOUNTING HOLE. (See note on reverse side.)
14
14
2
2
13
13A
Install
deadbolt
and
handleset
latches.
Tongue
(See D Below Before
Deadbolt Latch
Installation.)
(See Latch
Tongue Note
in Panel C)
3/4”
3/4”
Tongue
Latch Tongue Note
Bevel Side
Face Plate Curve
Strike Plate Curve
Bevel side of latch tongue should
contact curved end of face plate,
and curved end of strike plate.
Deadbolt Latch Tongue Note Install cylinder into plate
3C
3
4
Plate
Door Inside
3
5
6
Cylinder
Assembly
Place cylinder
assembly
with plate on
door exterior.
Attach deadbolt
adaptor plate
with provided
screws.
7
8
Attach
thumbturn
assembly
with
provided
screws.
Push down Button
and Hold During
Insertion
Insert
Handleset
Spindle
(long end rst, so that
short end goes on
door outside)
Door-Outside
1
2
Insert handleset spindle
3 & 4
Cylinder
and Plate
Install
Exterior
Handleset
on Door
Exterior.
(part #16)
18
22
24
23
19
20
20
1
Adapter Plate
Screws
Adapter
Plate
(part #17)
21
Install
long plate
with knob
on door
inside.
Insert
bottom grip
mounting
screw.
Bottom Grip
Mounting Screw
9
10
12
2
11
Install jamb strike plate
Door
Jamb
3/4
Note: Handlesets fit doors 1-3/4” to 2” thick.
Single Cylinder Handleset
LONG PLATE WITH
PRE-ATTACHED
KNOB
Nostalgic Warehouse
Door Hardware
Installation Instructions
1/4”
For assistance call 800-522-7336 Monday through Friday 7am to 6pm Mountain Time
PK173 9202017
For assistance call 800-522-7336 Monday through Friday 7am to 6pm Mountain Time
PK173 9202017
17
18
22
24
21
13A
14
26
25
9
10
12
16
15
14
1
3A
4
5
6
8
7
23
3C
3B
1A
13
19
20
11
2
1.
Deadbolt Latch
1A.
Latch Tongue
2.
3/4″ Latch & Strike Wood Screws (8)
3.
Cylinder Assembly (W/Keys)
3A.
Cylinder Body
3B.
Tailpiece
3C.
Spin Ring
4.
Plate
5.
Deadbolt Adapter Plate
6.
7.
Thumbturn Assembly
8.
5/8″ Thumbturn Machine Screws (2)
9.
Dustbox for Deadbolt
10
Door Frame Reinforcer
11.
3″ Reinforcer Wood Screws (2)
12.
Strike Plate for Deadbolt
13.
Handleset Latch
13A.
Latch Tongue
14.
Latch Faceplate
15.
Handleset Spindle
16.
Exterior Handleset
17.
Adapter Plate
19.
Long Plate
18.
Adapter Plate Screws (2)
20.
1″ Plate Mounting Screws
21.
Knob
22.
Screw Cover Adapter
23.
24.
Mounting Screw Cover
25.
Dustbox for Handleset
26.
Strike Plate for Handleset
}
3
Cross-Bore
Holes
Edge-Bore
Holes
Part
Number
Part
Description
Exploded Drawing Single Cylinder Handleset
Long Plate With Pre-Attached Knob
2” Machine Screws (2) for 1-3/4” thick
doors. 2-1/4” Machine Screws (2) for
2” thick doors.
2-1/2″ Bottom Grip Mounting Screw for
1-3/4” thick doors. 2-3/4” for 2” thick doors.
A
A
B
B
Push plastic template’s
large circles (A) into
existing bore holes of door.
Use position of bottom hole (B)
to mark and drill 1/4 inch
bottom grip mounting hole.
1.
2.
/