®
IOD 150 Series
ICE Dispenser
IOD 150
ICE-O-Matic
®
is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
✓ Stores 150 lbs. (68 Kgs.) of ICE
✓ Constructed from sturdy, corrosion-resistant
300 series stainless steel
✓ Only 22 inches (558 mm) wide
Problem
Maximum ICE
Maximum ICE storage in a minimum amount of space -
22 inches wide and holds 150 pounds of ICE
Worry-Free Dispensing
Direct Dispense - ensures that ICE hits the glass every time.
Quick Stop - prevents ICE overflow and waste.
Solution
Tight-Fitting Spaces
Counter space utilization
Sloppy Ice Dispensing
Ice dispenses inaccurately, often
missing or overfilling the glass
Inconsistent Ice Dispensing
Ice congeals in dispenser causing Ice
jams and inconsistent dispensing
Greater Dispensibility
Auto Rotate - turns the ICE for 4 seconds every
hour to consistently provide more dispensible ICE
Ice Melts Too Fast
Inadequate storage bin insulation
causes Ice to melt too quickly
Maximum Preservation
Dispenser bin is insulated with foam for maximum
ICE preservation - 1 inch of insulation
Hard To Clean
Ice cube machine must be lifted off
dispenser for cleaning
Power Clean
Allows access to the dispenser for easy cleaning
without moving the ICE machine
IOD 150 Push Bar 150 (68) 115/60/1 Cord 3.0 15 139 (63)
Call factory for other dispensing options
ICE-O-Matic’s
®
machines are not designed for outdoor installations. ICE-O-Matic
®
remote condensers are designed for outdoor installations.
Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended
periods of operation at temperature exceeding limitations constitutes misuse under the terms of ICE-O-Matic
®
Manufacturer’s Limited Warranty,
resulting in a loss of warranty coverage. Specifications and design are subject to change without notice.
Model Dispenser Bin Storage Voltage Min. Circuit Maximum Shipping
No. Operated by: Applied Capacity Characteristics No. of Wires Ampacity Fuse Size Weight lbs. (Kgs.)
ORDERING AND SPECIFICATION INFORMATION
35
5/8
"
(890 mm)
22
1/4
"
(550 mm)
22"
(550 mm)
30
11/16
"
(767 mm)
OPERATING LIMITS
Ambient Temp. Range
Air & Water 50° - 100°F (10° - 38°C)
Water Temp. Range 40° - 100°F (4.5° - 38°C)
Water Pressures Min. 20 psi
Max. 120 psi
Electrical Voltage Min. -5% Max. +10%
IOD 150 Series ICE Dispenser
60 Hz
Air-Cooled lbs. (kgs.) 320 (145) 506 (230)
Water-Cooled lbs. (kgs.) 355 (161) 528 (240)
Remote-Cooled lbs. (kgs.) n/a n/a
Voltage Char. 115/60/1 115/60/1
1. Tested at 70º Air/50º Water.
2. All specifications and performace data are subject to normal manufacturing variances.
Options:
KWGFID water glass filler kit for IOD 22” 2 (1)
KBT15022 adapter for 22” cubers on 22” IOD 24(11)
Model
ICE 0320 ICE 0520
ICE PRODUCTION FOR OPTIONAL CUBE ICE MAKERS
— POUNDS (KILOGRAMS) PER 24 HOURS
Dimensions
We reserve the right to make changes in design and construction at any time
without obligation.
2003 © ICE-O-Matic Rev Code: 4000A-08/03-SS
ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239
Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com
®
I
S
O
9
0
0
1
C
E
R
T
I
F
I
E
D
FRONT
12 1/4
311 mm
22 1/4
565 mm
2 7/8
73 mm
Front View
RIGHT
2 3/4
70 mm
10 1/16
256 mm
CUP
CLEARANCE
7 3/4
197 mm
21 1/4
540 mm
29
737 mm
30 11/16
779 mm
35 5/8
905 mm
30 7/16
773 mm
Side View
TO FRONT TOP OF
DRIP TRAY
22
559 mm
7/16
11 mm (4) PLCS
18 5/8
473 mm
15
381 mm
3 1/2
89 mm
8 5/8
219 mm
18 7/16
468 mm
6 11/16
170 mm
TO FRONT OF
DRIP TRAY ON
COUNTER TOP
12
305 mm
9
229 mm
OPENING
MOUNTING
TEMPLATE
30 11/16
779 mm
29
737 mm
21 1/4
540 mm
RECOMMENDED COUNTER OPENING SIZE 9" X 12" FOR
UTILITIES AND TUBING. OPENING CAN BE LOCATED
ANYWHERE WITHIN THE SHADED AREA.
1 13/16
46 mm
1 5/16
33 mm
Half Cube
7/8" x 7/8" x 3/8"
(22mm x 22mm x 10mm)
Full Cube
7/8" x 7/8" x 7/8"
(22mm x 22mm x 22mm
)
/
