JVC 0508TSH-II-IM User manual

LCT2403-001A-A

0508TSH-II-IM

LCD Television Users Guide

1080p HDTV

Important Note:

In the spaces below, enter the model and serial number of your television (located at the

rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this

guide. Keep this user’s guide in a convenient place for future reference. Keep the carton

and original packaging for future use.

Model Number:

Serial Number:

POWER

MODE

TV STB VCR DVD AUDIO

INPUT

123

456

789

0

TUNE

TV

RETURN

+

LIGHT MUTING

– CH + – VOL +

RM-C1430

TV

DVR

STATUS

VIDEO

GUIDE

TV/VCR

SUB T.

SUB CH C.C. DISPLAY

SOUND

OK

M

E

N

U

F

A

V

O

R

I

T

E

A

S

P

E

C

T

B

A

C

K

V1 V2 V3 V4 V5

SWAP

TWIN SLEEP ML/MTS

SELECT

LT-42X899

LT-47X899

LCT2403-001A-A English.indd 1LCT2403-001A-A English.indd 1 5/2/08 9:58:47 AM5/2/08 9:58:47 AM

2

Warnings . . . . . . . . . . . . . . . . . . 3

Precautions . . . . . . . . . . . . . . . . 7

Remote Control . . . . . . . . . . . . . 10

TV Basic Controls . . . . . . . . . . . 12

Key Features . . . . . . . . . . . . . . . 17

Setup . . . . . . . . . . . . . . . . . . . 18

Interactive Plug-In Menu . . . . . . . . . . 18

Remote Control Functions . . . . . 20

Return+ TV . . . . . . . . . . . . . . . . 20

Favorite . . . . . . . . . . . . . . . . . . . 20

Aspect . . . . . . . . . . . . . . . . 20

Sound . . . . . . . . . . . . . . . . 21

Video . . . . . . . . . . . . . . . . 21

Guide . . . . . . . . . . . . . . . . 21

SUB CH . . . . . . . . . . . . . . . . 21

C.C. . . . . . . . . . . . . . . . . . . . 22

TWIN . . . . . . . . . . . . . . . . . . . 22

Sleep . . . . . . . . . . . . . . . . . . . 23

ML/MTS . . . . . . . . . . . . . . . . 23

SWAP . . . . . . . . . . . . . . . . . . . 23

SELECT . . . . . . . . . . . . . . . . . . . 23

Customizing your TV . . . . . . 24

Initial Setup . . . . . . . . . . . . . . 25

Language . . . . . . . . . . . . . . . . 25

Tuner Setup . . . . . . . . . . . . . . . . 25

Set Clock . . . . . . . . . . . . . . . . 26

Set Lock Code . . . . . . . . . . . . . . . . 27

Interactive Plug-in Menu . . . . . . . . . . . 27

Software Version . . . . . . . . . . . . . . . . 27

Auto Demo . . . . . . . . . . . . . . . . . 27

V-Chip . . . . . . . . . . . . . . . . 28

V-Chip . . . . . . . . . . . . . . . . . . 29

Set US TV Ratings . . . . . . . . . . . . . . 29

Set Movie Ratings . . . . . . . . . . . . . . 30

Set Canadian Ratings English . . . . . . . 31

Set Canadian Ratings French . . . . . . . 31

Unrated . . . . . . . . . . . . . . . . . 31

Closed Caption . . . . . . . . . . 32

Reset . . . . . . . . . . . . . . . . . 32

On/Off Timer . . . . . . . . . . . . . 33

Mode . . . . . . . . . . . . . . . . 33

On Time . . . . . . . . . . . . . . . . . . . 33

Off Time . . . . . . . . . . . . . . . . 33

Channel . . . . . . . . . . . . . . . . 33

On Volume . . . . . . . . . . . . . . . . 33

Table of Contents

Picture Adjust . . . . . . . . . . . 34

Video Status . . . . . . . . . . . . . . . . 34

Natural Cinema . . . . . . . . . . . . 35

Theater Pro II . . . . . . . . . . . . . . . . 35

x.v.Color . . . . . . . . . . . . . . . . 35

Color Temp . . . . . . . . . . . . . . . . 35

Color Management . . . . . . . . . . . 36

Dynamic Gamma . . . . . . . . . . . . 36

Smart Picture . . . . . . . . . . . . . . . 36

Digital VNR . . . . . . . . . . . . . . . 36

MPEG NR . . . . . . . . . . . . . . . 36

Smart Sensor . . . . . . . . . . . . 36

Reset . . . . . . . . . . . . . . . . . 36

Sound Adjust . . . . . . . . . . . . 37

Balance . . . . . . . . . . . . . . . . 37

Turn On Volume . . . . . . . . . . . . . . 37

Volume Limit . . . . . . . . . . . . . . . . 37

Optical Out . . . . . . . . . . . . . . . . 38

Reset . . . . . . . . . . . . . . . . 38

Features . . . . . . . . . . . 39

Video-5 Input . . . . . . . . . . . . . . . 39

Noise Muting . . . . . . . . . . . . . 39

Front Panel Lock . . . . . . . . . . . . . 39

Auto Shut Off . . . . . . . . . . . . . . . 39

Quick Start-up . . . . . . . . . . . . . . . 39

Aspect . . . . . . . . . . . . . . . . . . . 40

Position Adjustment . . . . . . . . . . . . 41

Illumination . . . . . . . . . . . . 41

Power indicator . . . . . . . . . . . . 41

HDMI Size . . . . . . . . . . . . . . . . 41

Control with HDMI . . . . . . . . . . . 42

Video-1 Audio . . . . . . . . . . . . 42

Video Input Label . . . . . . . . . . . 42

Key Items . . . . . . . . . . . 43

Favorite . . . . . . . . . . . . . . . 43

Guide . . . . . . . . . . . . . . . . 43

Display . . . . . . . . . . . . . . . 43

Sleep Timer . . . . . . . . . . . . . . . 43

Multi Language/MTS . . . . . . . . . . . . 44

Photo Viewer . . . . . . . . . . . 45

Connecting Your Devices . . . . . 48

Programming Your Remote . . . . 55

Troubleshooting . . . . . . . . . . 62

Speciﬁ cations . . . . . . . . . . . . 64

Warranty . . . . . . . . . . . . 65

Notes . . . . . . . . . . . . . . . . . . 67

LCT2403-001A-A English.indd 2LCT2403-001A-A English.indd 2 5/2/08 9:58:53 AM5/2/08 9:58:53 AM

3

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid improper installation and never position the unit where good ventilation is unattainable.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair

it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty.

* When you don’t use this TV set for a long period of time, be sure to disconnect both the

power plug from the AC outlet and antenna for your safety.

* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or

other outlet unless the blades can be fully inserted to prevent blade exposure.

CAUTION: To reduce the risk of electric shock. Do not

remove cover (or back). No user serviceable

parts inside. Refer servicing to qualified service

personnel.

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

• As an “ENERGY STAR

®

” partner,

JVC has determined that this

product or product model meets the

“ENERGY STAR

®

” guidelines for energy

efficiency.

Warnings

LCT2403-001A-A English.indd 3LCT2403-001A-A English.indd 3 5/2/08 9:58:53 AM5/2/08 9:58:53 AM

4

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT RECYCLING INFORMATION

This product has a fluorescent lamp that contains mercury. Disposal

of these materials may be regulated in your community due to

environmental considerations. For disposal or recycling information,

please contact your local authorities or for USA, the Electronic Industries

Alliance: http://www.eiae.org

Warnings

LCT2403-001A-A English.indd 4LCT2403-001A-A English.indd 4 5/2/08 9:58:54 AM5/2/08 9:58:54 AM

5

16) Place the television on a stable, flat surface. Failure to do so can result in the television

falling, causing injury.

17) DO NOT allow young children to play around or on the television. Do not hang from the

TV. Failure to do so can result in the television falling, causing injury.

18) DO NOT allow young children to play with the plastic bag that came with the television

when you unpacked it. Failure to do so can result in suffocation, causing injury.

19) Avoid improper installation and never position the unit where good ventilation is impossible.

When installing this TV, distance recommendations must be maintained between the set

and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the

minimum distance guidelines shown for safe operation.

20) Cautions for installation

— Do not tilt the TV towards the left or right, or towards the back.

— Install the TV in a corner on the floor so as to keep cords out of the way.

— The TV will generate a slight amount of heat during operation. Ensure that

sufficient space is available around the TV to allow satisfactory cooling.

— Have two people remove the TV from the box with the screen facing away

from you. It's possible your clothing, (such as a belt buckle or button) may

scratch the front of the TV. Do the same when moving the TV to another

location.

21) When attaching to a wall, use the optional JVC wall mounting unit.

For LT-42X899: JVC-XUF-2637 LCD FLAT WALL MOUNT

For LT-47X899: JVCPCM-MS2 TILT/FLAT WALL MOUNT

Caution

— Consult qualified installers.

— See the included manual on mounting procedures.

— JVC is not responsible for damages or injuries due to improper mounting.

— Use with other wall mounting unit is capable of resulting in instability or causing possible

injury.

22) Make enough room for inserting and removing the power plug. Place the TV as close

to the outlet as possible. The main power supply for this TV is controlled by inserting or

removing the power plug.

23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

24) When this TV is connected to the wall outlet, it is always on standby even when all the LED

lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.

150 mm

5 7/8 in

200 mm

7 7/8 in

50 mm

2 in

150 mm

5 7/8 in

200 mm

7 7/8 in

Warnings

LCT2403-001A-A English.indd 5LCT2403-001A-A English.indd 5 5/2/08 9:58:54 AM5/2/08 9:58:54 AM

6

We have an important note for customers who subscribe to basic cable services (do not have

a separate cable box) and plan to use their JVC TV remote control to select channels.

Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is

receiving through the RF input), every channel number available from your cable company

will appear in your television’s Channel Summary and they will all be marked as available for

scanning. Even though every channel is detected and appears as available, you will only be

able to view those that you speciﬁ cally subscribe to from your cable company. This will likely

mean there are blank channels between those channels you wish to scan or “surf”.

We apologize for any inconvenience this may cause but it is important to note that this is

not a malfunction of your television. If you want to sequentially scan those channels you

subscribe to without blank ones in between, you can contact your cable company for their

cable box and remote, or manually deselect them using the edit / skip feature on page 25.

Warnings

FCC Notice:

Caution: Changes or modiﬁ cations not expressly approved by party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

LCT2403-001A-A English.indd 6LCT2403-001A-A English.indd 6 5/2/08 9:58:55 AM5/2/08 9:58:55 AM

7

Caring for the Cabinet

Caring for the Screen

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.

If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly

moistened with water. You can add a few drops of mild liquid detergent to the water to help

remove spots of oily dirt.

• DO NOT allow liquid to enter the TV through the ventilation slots.

• DO NOT use strong or abrasive cleaners on the TV.

• DO NOT spray liquids or cleaners directly on the TV’s surface.

• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a

soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner

and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.

These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image

distortions.

Precautions

Displaying ﬁ xed images for extended periods of time can leave a subtle but temporary burn-in

image on your screen. To avoid this, mix your viewing pattern.

Examples include, but are not limited to the following:

Avoiding Temporary Burn-in

XYZ XYZ

TV on

TV off

For example...

• Stock-market report bars

• Shopping channel logos and pricing

displays

• Video game patterns or scoreboards

• Bright station logos

• Internet web sites or other computer-style

images

• DVD discs, video tapes, laser discs

• Broadcast, cable, satellite channels or

digital television tuners/converters

LCT2403-001A-A English.indd 7LCT2403-001A-A English.indd 7 5/2/08 9:58:55 AM5/2/08 9:58:55 AM

8

Disconnecting the stand

1) Place the TV face down on a soft cloth on a table.

2) Remove the five screws from the back of the TV.

3) Pull out the stand from the TV.

Note:

• To re-install the stand, reverse the procedure from 3) to 1).

Precautions

Tidying the cables

A cable holder which keeps your connection cables

tidy is attached to the back of the stand.

Install your TV

To prevent the TV from falling, thread the belt

through the hole on the back of the standand

secure it to the TV rack.

Belt and screw (not included)

Hole

LCT2403-001A-A English.indd 8LCT2403-001A-A English.indd 8 5/2/08 9:58:56 AM5/2/08 9:58:56 AM

9

Use two “AA” batteries (included).

Place the "–" end in the unit first, making sure the "+" and

"–" markings are correct. Place the "–" end in the unit

first.

POWER

MODE

TV STB VCR DVD AUDIO

INPUT

123

456

789

0

TUNE

TV

RETURN

+

LIGHT MUTING

– CH + – VOL +

RM-C1430

TV

DVR

STATUS

VIDEO

GUIDE

TV/VCR

SUB T.

SUB CH C.C. DISPLAY

SOUND

OK

M

E

N

U

F

A

V

O

R

I

T

E

A

S

P

E

C

T

B

A

C

K

V1 V2 V3 V4 V5

SWAP

TWIN SLEEP ML/MTS

SELECT

+

AA Alkaline

–

+

AA Alkaline

–

AA Batteries x 2

Television x 1

Remote Control x 1

Package Contents

Make sure you have the following.

Insert the batteries

Precautions

If this symbol is shown, it is only valid

in the European Union

Your TV has a glossy frame and stand which

have protection sheets attached to them. Peel

them off before use, but only after the TV has

been properly placed. Take care with handling

the glossy frame and stand because these

surfaces are delicate. If the glossy frame or

stand becomes dirty, first dust it off, then wipe it

softly with a cleaning cloth. If you wipe without

dusting off, you may damage it.

Frame

Stand

How to clean the frame and stand

LCT2403-001A-A English.indd 9LCT2403-001A-A English.indd 9 5/2/08 9:58:58 AM5/2/08 9:58:58 AM

10

The following pages gives you a brief description of each button’s function. For more detailed

information on the remote control buttons, see pages 20 - 23. This remote can also control up

to four other devices. See page 55 - 61.

POWER

MODE

TV STB VCR DVD AUDIO

INPUT

123

456

789

0

TUNE

TV

RETURN

+

LIGHT MUTING

– CH + – VOL +

RM-C1430

TV

DVR

STATUS

VIDEO

GUIDE

TV/VCR

SUB T.

SUB CH C.C. DISPLAY

SOUND

OK

M

E

N

U

F

A

V

O

R

I

T

E

A

S

P

E

C

T

B

A

C

K

V1 V2 V3 V4 V5

SWAP

TWIN SLEEP ML/MTS

SELECT

Turns the TV volume to 0. Press again to

restore the volume.

MUTING

All remote control buttons are illuminated,

except for the LIGHT button.

LIGHT

Raise or lower the volume.

– VOL +

Move sequentially through the channels.

– CH +

Lets you go back to the previously selected

channel. See page 20.

TV

RETURN

+

Lets you decide the input channel and select

it. After pressing the remote 0 - 9 buttons,

press TUNE.

TUNE

Change channels. Input

remote codes. See page 55.

123

456

789

0

TUNE

TV

RETURN

+

Switch between devices

connected to Video-1, 2, 3,

4 and 5.

INPUT

V1 V2 V3 V4 V5

Switch between “TV / STB /

VCR / DVD / AUDIO devices.

See page 55.

MODE

TV STB VCR DVD AUDIO

Turns the TV on or off.

POWER

Remote Control

RM-

C

14

30

TV

DV

R

S

TAT

US

V

IDE

O

GU

ID

E

TV/VCR

S

UB T.

SU

B

C

H

C

.

C.

D

I

S

PLAY

SOU

N

D

F

A

F

V

A

O

V

R

I

T

E

A

S

A

P

E

C

T

C

S

WAP

TWIN

S

LEE

P

M

L

/

MT

S

ELE

CT

Go back to a previous onscreen menu or to

correct a mistake.

B

A

C

K

Used to navigate through the TV’s

onscreen menus.

OK

F

Used to access the TV’s onscreen menus.

See page 24.

M

E

N

U

LCT2403-001A-A English.indd 10LCT2403-001A-A English.indd 10 5/2/08 9:58:59 AM5/2/08 9:58:59 AM

11

POWER

MODE

TV STB VCR DVD AUDIO

INPUT

123

456

789

0

TUNE

TV

RETURN

+

LIGHT MUTING

– CH + – VOL +

RM-C1430

TV

DVR

STATUS

VIDEO

GUIDE

TV/VCR

SUB T.

SUB CH C.C. DISPLAY

SOUND

OK

M

E

N

U

F

A

V

O

R

I

T

E

A

S

P

E

C

T

B

A

C

K

V1 V2 V3 V4 V5

SWAP

TWIN SLEEP ML/MTS

SELECT

View current channel information.

DISPLAY

Use the C.C. (Closed Caption) button to

select the mode of closed caption. See page

22.

SUB T.

C.C.

Used to select sub channels.

(Digital channels only). See page 21.

TV/VCR

SUB CH

Programming information. (Digital channels

only). See page 21.

GUIDE

Choose different display settings according to

personal preferences. See page 21.

ATUS

VIDEO

Change the sound mode of the MaxxAudio

function. See page 21.

STAT

SOUND

Change the aspect ratio of the image on your

TV screen. See page 20.

A

S

P

E

C

T

Save your favorite channels. See page 20.

DVR

F

A

V

O

R

I

T

E

Remote Control

* See page 56 for buttons that control your external devices.

Listen to a program in stereo, mono or

another language (SAP). (Depending on

availability in the program). See page 23.

ML/MTS

Exchange the channel (or input) displayed in

the split screen window for the main screen

image.

SWAP

Activate the split screen option.

TWIN

Choose how long the TV will stay on before

turning off. See page 23.

SLEEP

Select the picture (channel) while viewing split

screen.

SELECT

POWER

MO

DE

TV

S

TB

V

C

R

DVD

A

UDIO

INPU

T

1

2

3

4

5

6

7

8

9

0

TU

NE

T

V

RETURN

+

LIGH

T

M

UTING

–

CH + – V

O

L +

OK

M

E

N

U

B

A

C

K

V1

V2

V3

V4

V5

RM-

C

14

30

TV

LCT2403-001A-A English.indd 11LCT2403-001A-A English.indd 11 5/2/08 9:59:10 AM5/2/08 9:59:10 AM

12

Before you connect your television to another device, please refer to the proper diagrams for

your specific TV and remote. These will help assist you in understanding how to connect your

television to another device, as well as use the remote to set up your television. Some of the

connection terminals are color coded for easy connection with the proper cables.

Front Panel

Side Panel

INPUT MENU C H VOL

OK BACK

POWER

TV Basic Controls

Illumination

Input

Change the input

MENU

Used to access the TV’s onscreen menus.

+CH–

Move sequentially through the channels.

+VOL–

Raises or lowers the volume.

POWER

Turn the TV on or off.

Rear Panel

Antenna / Cable

75 Ω

(VHF/UHF)

IR IN

F

POWER LED

• For governing the use of

the IR IN terminal, consult

your dealer.

LCT2403-001A-A English.indd 12LCT2403-001A-A English.indd 12 5/2/08 9:59:22 AM5/2/08 9:59:22 AM

13

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

R – AUDIO – L

S-VIDEO

R – AUDIO – L

RS-232CINPUT 5INPUT 4INPUT 3FOR HDMI 1AUDIO OUT

INPUT 5 INPUT 2 INPUT 1

DIGITAL AUDIO

OPTICAL OUT

PC IN

(D-SUB)

PHOTO

VIEWER

A, BA

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

R – AUDIO – L

S-VIDEO

R – AUDIO – L

RS-232CINPUT 5INPUT 4INPUT 3FOR HDMI 1AUDIO OUT

INPUT 5 INPUT 2 INPUT 1

DIGITAL AUDIO

OPTICAL OUT

PC IN

(D-SUB)

PHOTO

VIEWER

H

Audio System

G

Game Console

Video Camera

STB (Digital Cable,

satellite) Tuner Box

DVD Player

C, D, E

E

• For more detailed information, see

pages 48 - 54.

• For governing the usage of the

RS-232C terminal, consult your

dealer.

* This is used when you are using

a DVI device.

C, E

A

TV Basic Controls

Audio System

PC

I

A, B, C, D, E, F, G, H, I, J: Types of connections.

Digital Camera

J

LCT2403-001A-A English.indd 13LCT2403-001A-A English.indd 13 5/2/08 9:59:23 AM5/2/08 9:59:23 AM

14

Device Side With Cables TV Side

Good Best

VIDEO and AUDIO

A

HDMI HDMI Cable INPUT 1, 2 or 5

B

DVI + Audio

DVI – HDMI Cable,

Audio Cable

INPUT 1 +

HDMI ANALOG AUDIO

C

Component

Video + Audio

Component

Video + Audio INPUT 3 or 4

D

S-Video + Audio

S-Video Cable,

Audio Cable

INPUT 3 +

AUDIO Input

E

Composite

Video + Audio

Composite

Video + Audio INPUT 3, 4 or 5

F

Antenna / Cable

(VHF / UHF) RF Cable

75Ω

(VHF / UHF)

Good Best

AUDIO

G

OPTICAL INPUT

OPTICAL AUDIO

Cable

DIGITAL AUDIO

OPTICAL OUT

H

AUDIO INPUT

(L / R) Audio Cable

AUDIO OUT

(L / R)

TV Basic Controls

LCT2403-001A-A English.indd 14LCT2403-001A-A English.indd 14 5/2/08 9:59:27 AM5/2/08 9:59:27 AM

15

Compatible Signal Notes

Input

• HDMI (Digital)

SD: 480i, 480p

HD: 1080/60p / 1080/30p / 1080/24p / 1080i / 720p

Audio L/R (Digital)

See page 52.

Input

• DVI (Digital)

SD: 480i, 480p

HD: 1080/60p / 1080i / 720p

• Audio L/R (Analog)

See page 51.

Input

• Component (Analog)

SD: 480i, 480p

HD: 1080i, 720p

• Audio L/R (Analog)

See page 49.

Input

• S-Video (Analog)

• Audio L/R (Analog)

Input

• Composite (Analog)

• Audio L/R (Analog)

See page 49.

ATSC (Digital)

NTSC (Analog)

Clear QAM (Digital)

See page 48.

Output

• Audio L/R (Digital)

(PCM or Dolby Digital)

See page 50.

Output

• Audio L/R (Analog)

(Fixed)

See page 50.

TV Basic Controls

LCT2403-001A-A English.indd 15LCT2403-001A-A English.indd 15 5/2/08 9:59:28 AM5/2/08 9:59:28 AM

16

TV Basic Controls

Device Side With Cables TV Side

I

D-SUB

+ Audio

(3.5 mm stereo mini jack)

D-sub (15 pin) Cable

+ Audio Cable

PC IN

(D-SUB)

PC IN (D-SUB)

+ INPUT 5 AUDIO Input

Device Side With Cables TV Side

J

USB

USB Cable

PHOTO

VIEWER

PC

USB

LCT2403-001A-A English.indd 16LCT2403-001A-A English.indd 16 5/2/08 9:59:28 AM5/2/08 9:59:28 AM

17

Key Features

Your JVC TV is equipped with many features. Here are some key features

highlighted in detail.

1 Stunning picture quality via 1920x1080 Full HD panel.

Dynamic Gamma and Color Management give further

ﬁ ne tuned picture reproduction. Smart Picture adjusts the

best possible picture quality automatically scene by scene

based on the incoming signal from any source!

3 JVC exclusive twin oblique cone speakers provide excellent TV sound quality. MaxxAudio

sound provides you with 4 different settings based on the program you are watching. The

equalizer will ﬁ ne tune your listening preferences.

5 Aspect mode will show every pixel you are getting in High Deﬁ nition. The Native mode will

show 100% of 1080p. Full – with slight overscan. Panorama and Cinema will ﬁ ll the screen

with various aspect settings. See page 40.

6 Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage

Class devices. See page 45.

i-clear Motion NR – Provides 3D noise reduction for moving images by applying the

high-precision motion prediction techniques.

Real 12bit Driver – JVC’s new bit extention technology takes 8-bit images and turns them into

images with 12-bit precision. It produces smooth, natural signal gradations

without sacraﬁ cing the original HD signal.

2 “120Hz Clear Motion Drive III technology displays

120 frames per second (120Hz) in the same time a

conventional LCD TV displayes 60 frames (60Hz). You

will be able to reduce blurring or image trails when there is

rapid or complex movement across the screen.

OffOn

4 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of

connections are explained on pages 47 to 51.

x 3 x 2

x 1

HDMI CEC (see page 42)

LCT2403-001A-A English.indd 17LCT2403-001A-A English.indd 17 5/2/08 9:59:29 AM5/2/08 9:59:29 AM

18

Interactive Plug-In Menu

When you turn on your TV for the first time, the Interactive Plug-In Menu appears automatically.

These menus will help you setup your TV with basic information for Language, Time and

Tuner Setup.

Setup

POWER

1) Turn on the TV

1 Select a language

Mode Auto (Analog), Auto (Digital), Manual

Channel Only can select when Mode is in Auto (Digital)

Time Only can select when Mode is in Manual

Time Zone Choose the time zone you live in.

D.S.T. Changes the clock automatically for daylight saving time. On / Off

1 Change settings

3) Set time attribute

Select

Operate Exit

MENU

Interactive Plug-In Menu

> Set Clock

Start Clock

Mode

Channel

Time

Time Zone

D.S.T

Back

BACK

Manual

– –

– – : – – – –

Pacific

Off

2 Select an item

4 Move to next menu

3 Select “Start

Clock”

OK

2) Set the language

Select

Operate Exit

MENU

Language/Langue/Idioma

English

Interactive Plug-In Menu

> Language/Langue/Idioma

Set

OK

2 Select “Set”

3 Move to next menu

POWER

MODE

TV STB VCR DVD AUDIO

INPUT

123

456

789

0

TUNE

TV

RETURN

+

LIGHT MUTING

– CH + – VOL +

RM-C1430

TV

DVR

STATUS

VIDEO

GUIDE

TV/VCR

SUB T.

SUB CH C.C. DISPLAY

SOUND

OK

M

E

N

U

F

A

V

O

R

I

T

E

A

S

P

E

C

T

B

A

C

K

V1 V2 V3 V4 V5

SWAP

TWIN SLEEP ML/MTS

SELECT

MO

DE

TV

S

TB V

CR

DVD

A

UDI

O

INP

UT

1

2

3

4

5

6

7

8

9

0

TUNE

T

V

RETURN

+

LI

G

H

T

MU

TIN

G

–

CH + – V

O

L +

RM-

C

14

30

TV

DVR

S

TAT

US

V

IDEO

G

UIDE

TV/VC

R

S

UB T.

S

UB CH C.C

.

DISPLAY

SO

UND

M

E

N

U

F

A

F

V

A

O

V

R

I

T

E

A

S

A

P

E

C

T

C

B

A

C

K

V

1

V2

V

3

V4

V5

S

WA

P

TWIN

S

LEE

P

ML

/

MT

S

ELE

CT

LCT2403-001A-A English.indd 18LCT2403-001A-A English.indd 18 5/2/08 9:59:30 AM5/2/08 9:59:30 AM

19

* If you use a set top box (satellite or cable box), press “Exit” to

skip this step.

“Thank you! Setup is now complete”

Setup

1 Change settings

4) Set TV attribute

Select

Operate Exit

MENU

Interactive Plug-In Menu

> Auto Tuner Setup

Start

Tuner Mode

Scan Mode

Back

BACK

Cable

Auto

2 Select an item

4 Start scanning

channels

3 Select “Start”

OK

LIGHT MUTING

– CH + – VOL +

RM-C1430

TV

DVR

STATUS

VIDEO

GUIDE

TV/VCR

SUB T.

SUB CH C.C. DISPLAY

SOUND

OK

M

E

N

U

F

A

V

O

R

I

T

E

A

S

P

E

C

T

B

A

C

K

SWAP

TWIN SLEEP ML/MTS

SELECT

Tuner Mode Choose Air (antenna), Cable or Skip

Scan Mode Auto, STD, HRC, IRC

Interactive Plug-In Menu (Continued)

LIGHT

M

UTIN

G

– CH +

–

V

O

L +

R

M-

C

14

30

TV

D

V

R

S

TAT

US

VIDE

O

GU

ID

E

TV/VC

R

S

UB T

.

SU

B

CH

C

.

C.

D

I

S

PLAY

SOU

N

D

M

E

N

U

F

A

F

V

A

O

V

R

I

T

E

A

S

A

P

E

C

T

C

B

A

C

K

S

WAP

TWIN

S

LEEP

M

L

/

MT

S

ELE

CT

Cable Users: After your auto tuner setup is complete, you may,

(depending on the type of hookup), have only 1 channel, usually

2, 3 or 4 in the auto tuner memory. This is normal.

LCT2403-001A-A English.indd 19LCT2403-001A-A English.indd 19 5/2/08 9:59:34 AM5/2/08 9:59:34 AM

20

Remote Control Functions

Has three functions.

Return – Returns to the channel viewed just before the channel currently onscreen.

Return+ – Lets you program a specific channel to return to while scanning through the

channels using the – CH + button as you memorize the channel.

TV – Returns to the TV mode as you are watching a video, DVD, etc.

Note:

• Press the RETURN+ TV and hold for three seconds. This will memorize the current channel

to return to while you scan through the other channels. To cancel, press and hold the

RETURN+ TV button for three seconds.

TV

RETURN

+

RETURN+ TV

Allows you to save channels you like so you can view them easily. First you must register the

channels you like.

Notes:

• Go to the channel you want to register and press the FAVORITE button for three seconds.

• To view your favorite channels, press FAVORITE. Move π† to select your channel and

press OK.

• To erase your favorite channels, press FAVORITE. Move π† to select your channel and

press ®.

• Both analog and digital channels can be registered.

• The newest channel you registered will appear at the top of the list.

DVR

F

A

V

O

R

I

T

E

FAVORITE

Allows you to adjust the way the image appears on your TV based on the format that is being

received.

Panorama / Cinema / Full / Panorama Zoom / Cinema Zoom / Full Native / Regular / Slim

See page 40.

Note:

• You can select the aspect mode by pressing the ASPECT button.

A

S

P

E

C

T

ASPECT

LCT2403-001A-A English.indd 20LCT2403-001A-A English.indd 20 5/2/08 9:59:36 AM5/2/08 9:59:36 AM

Page is loading ...

JVC 0508TSH-II-IM User manual

This manual is also suitable for

JVC 0508TSH-II-IM User manual

Related papers

Other documents