Aiphone PG - 3 User manual

Category
Car audio amplifiers
Type
User manual

Aiphone PG - 3 is a 3-Watt Paging Amplifier designed for use with Aiphone intercom systems. It allows paging announcements to relatively small rooms or areas where only one paging speaker is installed.

The PG - 3 can be used with the following Aiphone intercom systems: TB-F, TB-H, TS-K, KAH, LAF, LAH-20, and HM-7. It has two inputs, INPUT 1 and INPUT 2, which can be used to connect to different types of paging adaptors or intercom systems. The INPUT 1 is for systems TB-F, TB-H, TS-K, and KAH, while the INPUT 2 is for systems LAF, HM-7, and LAH-20.

Aiphone PG - 3 is a 3-Watt Paging Amplifier designed for use with Aiphone intercom systems. It allows paging announcements to relatively small rooms or areas where only one paging speaker is installed.

The PG - 3 can be used with the following Aiphone intercom systems: TB-F, TB-H, TS-K, KAH, LAF, LAH-20, and HM-7. It has two inputs, INPUT 1 and INPUT 2, which can be used to connect to different types of paging adaptors or intercom systems. The INPUT 1 is for systems TB-F, TB-H, TS-K, and KAH, while the INPUT 2 is for systems LAF, HM-7, and LAH-20.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Aiphone PG - 3 User manual

Category
Car audio amplifiers
Type
User manual

Aiphone PG - 3 is a 3-Watt Paging Amplifier designed for use with Aiphone intercom systems. It allows paging announcements to relatively small rooms or areas where only one paging speaker is installed.

The PG - 3 can be used with the following Aiphone intercom systems: TB-F, TB-H, TS-K, KAH, LAF, LAH-20, and HM-7. It has two inputs, INPUT 1 and INPUT 2, which can be used to connect to different types of paging adaptors or intercom systems. The INPUT 1 is for systems TB-F, TB-H, TS-K, and KAH, while the INPUT 2 is for systems LAF, HM-7, and LAH-20.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI