2. 3M
  3. Adper™ Scotchbond™ Multi-Purpose Adhesive

3M Adper™ Scotchbond™ Multi-Purpose Adhesive, Adper™ Scotchbond™ Multi-Purpose Adhesive System Intro Kit, 7540S User guide

  • Hello! I am an AI chatbot trained to assist you with the 3M Adper™ Scotchbond™ Multi-Purpose Adhesive User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DIRECT COMPOSITE RESTORATION
Adper
™
Scotchbond
™
Multi-Purpose Adhesive
Vitrebond
™
Light Cure Glass Ionomer Liner/Base
3M
™
ESPE
™
Z100
™
Restorative
Sof-Lex
™
Discs, Strips, and Finishing Brush
4
3
1 of 2
1
2
Preparation:
• Isolate tooth with rubber dam. Remove caries/old restoration.
Complete preparation.
Apply liner/base if desired:
• Mix a level scoop of Vitrebond powder and
a drop of Vitrebond liquid on a mixing pad.
• Apply a thin layer of the liner/base to
dentin surfaces using a ball applicator.
• Light-cure for 30 seconds.
Etch:
• Apply Scotchbond
™
Etchant to enamel
and dentin—wait 15 seconds. Etchant on
Vitrebond until not deleterious.
• Rinse.
• Remove excess water with an air
syringe or by blotting. Leave moist.
Prime:
• Apply Adper Scotchbond Multi-Purpose
Primer to enamel and dentin.
• Dry gently for 5 seconds (no waiting).
Surface will appear shiny.
Bond:
• Apply Scotchbond Multi-Purpose
adhesive to enamel and dentin.
• Light-cure for 10 seconds.
DIRECT COMPOSITE RESTORATION
2 of 2
3M ESPE Customer Hotline 1-800-634-2249 70-2009-2475-4
Please refer to instructions for more detailed information 44-0017-8292-7
as well as precautionary and warranty information. © 2003 3M
5
6
7
Place and light-cure 3M
™
ESPE
™
Z100
Restorative incrementally:
• Place matrix band, wedge and small
first increment.
• Continue incremental placement.
• For optimum wear resistance, cure final
increment for 60 seconds.
• After removal of matrix band, proximal
curing is recommended.
Finish and Polish:
• Finish occlusal surface using a Sof-Lex
Finishing Brush.
• Finish proximal surfaces with Sof-Lex
Extra Thin Discs and Strips.
Shade
A 2.0, 3.0, 3.5
B 2.0, 3.0
C 2.0
D 3.0
P
I
A 4.0
CY
CG
Thickness (mm)
2.5
2.5
2.5
2.5
2.5
2.5
2.0
2.0
2.0
Cure Time (sec)
40
40
40
40
40
40
40
40
40
Recommended
Cure Times for
Z100 Restorative
• Check Occlusion.
• Check lateral and centric occlusion.
• Adjust if necessary.
Adper
™
Scotchbond
™
Multi-Purpose Adhesive
Vitrebond
™
Light Cure Glass Ionomer Liner/Base
3M
™
ESPE
™
Z100
™
Restorative
Sof-Lex
™
Discs, Strips, and Finishing Brush
/