1

Functionality added in M-380 version 1.2

Saving/Loading

●

Improve project file compatibility.

The M-400/M-380 project files saved in version 1.2 or later can be loaded into M-480, M-400, M-380, or M-300.

M-400/M-380 can also load M-400/M-380 project files saved in earlier versions.

User Settings

●

“MAIN FADER” option has been added to the USER PREFERENCE popup.

●

Now the GEQ ON FADER function does not cancel the SENDS ON FADER.

●

A “0.5dB STEP” option has been added to the GEQ EDIT popup.

If this is checked, the GEQ fader operation will step by 0.5 dB.

●

MAIN C and MATRIX operation via MIDI control change message has been added.

For more information, refer to “M-400/M-380 MIDI Implementation Version 1.03.”

PARAM1 PARAM2 Button Explanation

DESTINATION

SELECT

AUX 1–16,

MTX 1–8,

ON: lit, OFF: unlit Turns the talkback assign ON/OFF for the specified bus.

●

The Auto MDI/MDI-X function has been added.

This function automatically detects the type of the connected Ethernet cable (Crossover or Straight) and configures the connection appropriately.

By enabling this, both Crossover and Straight Ethernet cable can be supported for REAC connection.

1.

In the SETUP section, hold down [SYSTEM] and turn the power on.

The SYSTEM CONFIG screen will appear.

2.

Press [F4 (REAC)].

The REAC popup will appear.

3.

Press [ENTER] to check “Auto MDI/MDI-X”.