Haier LC-3210D Operating Instructions Manual

Category
Supplementary music equipment
Type
Operating Instructions Manual

This manual is also suitable for

LC-2610D
LC-2710D
LC-3210D
LC-2610D
LC-2710D
LC-3210D
COLOR TELEVISION
OPERATING
INSTRUCTIONS
LCD Display
Wide View-angle Display, high contrast
HDMI input
Parental guidance
CCD function
MTS
01
0090508203
CONTENTS
Warning and caution............................................................................................1
Important safety instructions................................................................................4
Buttons and interface position...............................................................................5
Preparation for remote control..............................................................................6
Remote control panel............................................................................................7
Basic operation......................................................................................................8
Screen display.......................................................................................................9
TV program setting..............................................................................................10
Picture control......................................................................................................11
Sound control.......................................................................................................12
Screen setting.......................................................................................................13
....................................................................................................13
CCD functions.....................................................................................................14
Parental guidance.................................................................................................15
Parental control....................................................................................................16
Other functions....................................................................................................17
External audio and video equipment connection.................................................20
Using your TV as a computer display..................................................................21
Specifications.......................................................................................................22
Trouble shooting guide........................................................................................23
Function setting
1
WARNING AND CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR
ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:
THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.
IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.
THERE IS A EXCALMATION MARK IN THE TRIANGLE: THIS
SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING. OPERATION AND MAINTENANCE HAS BEEN
INCLUDED WITH THIS PRODUCT.
CAUTION
DO NOT OPENDO NOT OPEN
RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK
!!
!!
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,
DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.
DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY
SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT
WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED
AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.
WARNING AND CAUTION
Please ensure that the set has adequate
ventilation.
Do not put the unit near water or oil as it
may cause a fire.
During thunderstorms, unplug both the
antenna and power plug to prevent
damage.
Do not use a damaged power plug or put
the power supply wire near a heat source
as it may cause electric shock or fire.
To prevent potential fire, do not overload
an electrical outlet with too many plugs.
Place the set on a level surface to
prevent it from tipping and potential
damage.
Do not remove the cover of the set
or try to service. This may result in
electric shock or fire. All service
work must be completed by an
authorized technician.
Do not place the power adapter near
a heat source or it may cause a fire.
If there are any abnormal sounds or
smells from the unit, unplug
immediately and contact an authorized
service provider.
2
WARNING AND CAUTION
3
To prevent fire, do not use or store any
flammable materials near the unit.
To prevent fire, do not place the unit near
a damp wall.
To prevent electric shock, ensure that
any external antenna connected to the set
is clear of contact with any power lines.
Do not plug / unplug the unit while your
hands are wet. This may cause an electric
shock.
Please ensure a solid connection with
the AC wall socket in order to avoid
shock and potential fire.
To prevent electric shock or fire, please
note to prevent rain from entering the set
along the wire connected to the outside
antenna.
When cleaning, please unplug the unit.
Use a soft cotton cloth. Do not use any
abrasive cleansers, and prevent water
from entering the set.
If any plugs or input wires are dirty, unplug
the set and clean. This will prevent risk of
electric shock or fire.
If the set is not going to be used for an
extended period, unplug the unit from
the AC wall outlet.
Do not place the set near a heat source or
in direct sunlight.
BUTTONS AND INTERFACE POSITION
5
Front control panel
Back interface
1. Power input socket
2. Antenna input
3. Video input 2
4. Video input 1
5. S-VIDEO input
6. HDTV or S-VIDEO audio input
7. Video output
8. HDTV input
9. VGA audio input interface
10. VGA input
11. HDMI input
1
2
457
9
10
8
6
3
HDMI
11
(Y/Pb/Pr)- L-IN R-IN
V-OUT L-OUT R-OUT
AV2 L R
AV1 L R
CH-
TV/AV
MENU
Power button
Program down/up button
Volume down/up button
TV/AV switch button
Menu button
Power indicator
Remote sensor
CH+
VOL-
VOL+
CH -
TV /AV
ME NU
CH +
VO L-
VO L+
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8) Do not install near any hear sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purposes of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use the attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Refer all serving to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
WARNING -To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose
This Apparatus To Rain Or Moisture.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
64
7
PREPARATION FOR REMOTE CONTROL
3
2
1
++
Remote control installation
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
Cautions for using remote control
Confirm there is no object between the
remote control and the remote sensor
of TV set.
Sunshine or other strong light will
interfere the signal sent by the remote
control. In this situation turn the TV
set to avoid the direct light source.
Do not put the remote control in direct
heat or a damp place, or potential
damage to the remote may occur.
Please use two AA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct
polarities.
Do not use the rechargeable batteries.
6
REMOTE CONTROL PANEL
1
2
3
4
7
8
9
11
12
13
14
15
16
17
18
20
21
10
19
5
6
11
Power button
Mute button
TV/AV switch button
Display button
CCD mode selection button
Parental guidance button
SAP button
Picture size selection button
Digit selection button
Program recall button
Program scan button
Picture mode selection button
Sound mode selection button
Program up/down button, direction
selection button
Volume up/down button, direction
selection button
Menu call/selection button
This function is not available
This function is not available
Sleep timer button
Picture still button
These functions are not available
Buttons and Descriptions
5
8
9
10
1 2 3
4
5
6
7
8 9
0
=
HY F- 35 T
1
3
7
2
6
4
P.G.
CCD
21
20
19
18
17
16
15
14
13
12
11
MUTE
TV/AV
SIZE
POWER
SAP
DISPLAY
SCAN
P.STD
RECALL
S.STD
CH+
CH-
VOL-
VOL+
MENU
C.SYS
S.SYS
STILL SLEEP
9
8
BASIC OPERATION
1. If the TV set is in standby status, pressing the power
switch on the remote control or TV set will turn the
power on to the set.
2. Pressing power switch on the remote control or
the TV set again, the TV set will enter standby
status.
Standby mode: connect set to the AC power outlet.
TV PROGRAM SELECTION AND VOLUME
ADJUSTMENT
You can use CH+/- button or direct number
buttons to select the TV channel number.
Press VOL+/- button to adjust the volume.
RECALL
Pressing RECALL button can switch the channel to the
last channel you watched.
MUTE FUNCTION
1. Press MUTE button to turn off the TV sound, the
screen displays mute icon.
2. Press MUTE button again or VOL+ button to turn
on the TV sound.
MUTE
TV/AV
SIZE
POWER
SAP
P.G.
CCD
DISPLAY
POWER ON/OFF TV
PICTURE MODE/SOUND MODE SELECTION
Press P.STD button on the remote control
repeatedly, the following four picture modes
can be selected in turn.
NATURAL: common mode.
SOFT: the image effect is soft.
PERSONAL: set the image effect you like.
BRIGHT: suitable for sport programs.
NATURAL
BRIGHT
PERSONAL
SOFT
Press S.STD button on the remote control
continually, the following four sound modes
can be selected in turn.
You can also enter picture and sound menu to adjust.
NORMAL
MUSIC PERSONAL
NEWS
0
0
SCAN
P.STD
SCAN
P.STD
RECALL
S.STD
RECALL
S.STD
SCREEN DISPLAY
MOVE SELECT MENU RETURN
SOUND
SOUND MODE PERSONAL
EQUALIZER:
120HZ
500HZ
1K5HZ
5KHZ
10KHZ
BALANCE
MOVE SELECT MENU RETURN
SCREEN
SIZE MODE FULL
MOVE SELECT MENU RETURN
SOURCE
MTS MONO
SKIP OFF
ANTENNA CATV
FINE TUNE
AUTO SEARCH
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
HUE
DNR
COLOR TEMP.
COOL
PICTURE
MOVE SELECT MENU RETURN
STRONG
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALFTONE
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION CC1
PARENT CONTROL
MOVE MOVE MENU RETURN
FUNCTION
ALL FV V S L D
TV-Y U
TV-Y7 U U
TV-G U
TV-PG U U U U U
TV-14 U U U U U
TV-MA U U U U
USE P.G. KEY TO
BLOCK/UNBLOCK
MOVE SELECT MENU RETURN
FUNCTION
G B
PG B
PG-13 B
R B
NC-17 B
X B
MOVE SELECT MENU RETURN
FUNCTION
CHANGE
P.G. ON
TV RATING
MOVIE RATING
For your convenient operation and in order to know the TV set, we offer the below
menus.
Operation instructions
the actual display may differ from the above menus, if you need adjust, please do as
follows:
1.Press MENU button to open the menu, use CH+/- button to select every menu
separately, use VOL+/- button to enter.
2.Press CH+/- button to select the item needs adjust.
3.Press VOL+/- button to adjust the selected item, or enter the next menu.
4.Press MENU button to return the last menu or exit the screen menu display.
Note: “press MENU button to select the menu operation in the user’s manual, please
refer to these operation instructions.
10
11
TV PROGRAM SETTING
AUTO SEARCH
Using AUTO SEARCH can search all available
channels. We recommend using auto search to
search the program when you use this TV set for
the first time.
1.Press MENU button to select source menu.
2.Press CH+/- button to select AUTO SEARCH.
3.Press VOL+/- button to start searching, press MENU
button to finish auto search.
Note: In most cases you will only have to run the Auto
Search function once, unless you change your
cable provider.
When you can’t get satisfactory tuning on a channel,
you can fine tune to correct.
1. Press MENU button to select source menu.
2. Press CH+/- button to select FINE TUNE.
3. Press VOL+/- button to start fine tune until you
obtain the best picture and sound, then loose
the button, press MENU button to exit.
SKIP
1. Select the program number you want to skip.
2. Press MENU button to select source menu.
3. Press CH+/- button to select SKIP, press
VOL+/- button to select ON.
4. Press MENU button to shut off the menu.
FINE TUNE
ANTENNA
1. Press MENU button to select SOURCE menu.
2. Press CH+/- button to select ANTENNA item.
3. Press VOL+/- button to select CATV or AIR.
MOVE SELECT MENU RETURN
SOURCE
MTS MONO
SKIP OFF
ANTENNA CATV
FINE TUNE
AUTO SEARCH
MOVE SELECT MENU RETURN
SOURCE
MTS MONO
SKIP OFF
ANTENNA CATV
FINE TUNE
AUTO SEARCH
MOVE SELECT MENU RETURN
SOURCE
MTS MONO
SKIP OFF
ANTENNA CATV
FINE TUNE
AUTO SEARCH
MOVE SELECT MENU RETURN
SOURCE
MTS MONO
SKIP OFF
ANTENNA CATV
FINE TUNE
AUTO SEARCH
When you use CH+/- button to select channel,
this channel number will be skipped. But you
can still use direct number buttons to select the
skipped channel number directly.
Note: How to recover the skipped channel number
1. Press direct number buttons to select the
channel number that needs recover.
2. Press MENU button to enter source menu.
3. Press CH+/- button to select SKIP, press VOL+/-
button to select OFF.
MTS
MTS is the U.S. standard for broadcasting stereo TV
sound. A large number of TV shows are now
broadcast in stereo sound using this technology.
1. Press MENU button to enter SOURCE menu.
2. Press CH+/- button to select MTS, press VOL+/-
button to select MONO, STEREO or SAP.
PICTURE CONTROL
TV PROGRAM SETTING
SET YOUR FAVOURITE PICTURE MODE
1. Press MENU button to select PICTURE menu.
2. Press CH+/- button to select the item that needs
adjust.
3. Press VOL+/- button to adjust the selected item,
the detailed adjustment is as following table.
THE TABLE OF PICTURE ITEM ADJUSTMENT
Items
VOL- VOL+
Contrast
Brightness
Saturation
Hue
Sharpness
Weak
Strong
Dark
Bright
Light
Thick
Green
Red
Soft Sharp
COOL
PICTURE
MOVE SELECT MENU RETURN
STRONG
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
HUE
DNR
COLOR TEMP.
MOVE SELECT MENU RETURN
SOURCE
MTS MONO
SKIP OFF
ANTENNA CATV
FINE TUNE
AUTO SEARCH
Note: Hue is only available in NTSC system.
1012
13
PICTURE CONTROL
DNR CAN DECREASE THE NOISE OF THE
PICTURE
1. Press MENU button to select the PICTURE menu.
2. Press CH+/- button to select the DNR.
3. Press VOL+/- button to select OFF, WEAK or
STRONG as preferred.
COOL
PICTURE
MOVE SELECT MENU RETURN
STRONG
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
HUE
DNR
COLOR TEMP.
COLOR TEMPERATURE
1. Press MENU button to select the PICTURE menu.
2. Press CH+/- button to select the COLOR TEMP..
3. Press VOL+/- button to select COOL, WARM or
NORMAL as preferred.
COOL
PICTURE
MOVE SELECT MENU RETURN
STRONG
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
HUE
DNR
COLOR TEMP.
SOUND CONTROL
You can select your favourite sound modes, and adjust
the BALANCE and EQUALIZER of audio.
1. Press MENU button to select SOUND menu.
2. Press CH+/- button to select the sound item you
need set.
3. Press VOL+/- button to adjust the selected item.
BALANCE: Press VOL+/- button to enter adjustment,
use VOL+/- button to adjust the balance of left and
right sound.
EQUALIZER: Press VOL+/- button to set sound mode
to PERSONAL, use CH+/- button to select each different
frequency, use VOL+/- button to adjust.
SOUND EFFECT CONTROL
MOVE SELECT MENU RETURN
SOUND
SOUND MODE PERSONAL
EQUALIZER:
120HZ
500HZ
1K5HZ
5KHZ
10KHZ
BALANCE
SCREEN MODE
There is different screen display picture zoom settings,
you can select according to your preference.
1. Press MENU button to enter SCREEN menu.
2. Press VOL+/- button to select FULL, ZOOM1,
ZOOM2 or NORMAL.
FUNCTION SETTING
SCREEN SETTING
MOVE SELECT MENU RETURN
SCREEN
SIZE MODE FULL
CLOCK
1. Press MENU button to select FUNCTION menu.
2. Press CH+/- button to select CLOCK.
3. Press VOL+/- button to enter the clock setting.
4. Press VOL+/- button to select hour or minute,
press CH+/- button to set the time.
TIME ON
1. Press MENU button to select FUNCTION menu.
2. Press CH+/- button to select TIME ON.
3. Press VOL+/-button to enter the time on setting.
4. Press VOL+/- button to select hour or minute,
press CH+/- button to set the time.
TIME OFF
1. Press MENU button to select FUNCTION menu.
2. Press CH+/- button to select TIME OFF.
3. Press VOL+/- button to enter the time off setting.
4. Press VOL+/- button to select hour or minute,
press CH+/- button to set the time.
Note: You must first set the system clock before setting
other items.
HALF TONE
1. Press MENU button to select FUNCTION menu.
2. Press CH+/- button to select HALF TONE.
3. Press VOL+/- button to adjust the value.
DURATION
1. Press MENU button to select FUNCTION menu.
2. Press CH+/- button to select DURATION item.
3. Press VOL+/- button to select 15S, 30S, 45S, 60S
or ALWAYS .
SCREEN LANGUAGE SELECTION
1. Press MENU button to select FUNCTION menu.
2. Press CH+/- button to select LANGUAGE item.
3.Press VOL+/- button to select on-screen
display languages(English/French/Spanish/
Portuguese) you need.
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALF TONE
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION OFF
PARENT CONTROL
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALF TONE
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION OFF
PARENT CONTROL
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALF TONE
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION OFF
PARENT CONTROL
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALF TONE
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION OFF
PARENT CONTROL
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALF TONE
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION OFF
PARENT CONTROL
1014
15
CCD FUNCTIONS
CCD FUNCTION
1.Press MENU button to enter FUNCTION menu.
2.Press CH+/- button to select CLOSED CAPTION
item.
3.Press VOL+/- button to enter CCD mode. When
CCD is in OFF mode, the CCD content will not
display; when it is in CC 1 mode, the CLOSED
CAPTION will be started, and the contents of
CLOSED CAPTION1 will be displayed after the
FUNCTION menu disappears; in a similar way,
in CC 2/CC3/CC4 mode, the contents of CLOSED
CAPTION2/CLOSE CAPTION3/CLOSE
CAPTION4 will be displayed after the FUNCTION
menu disappears. When it is in TEXT1 mode, the
TEXT1will be started, and the contents of TEXT1
will be displayed after the FUNCTION menu
disappears; in a similar way, when it is TEXT2/
TEXT3/TEXT4 mode, the TEXT2/TEXT3/TEXT4
will be started, and the content of TEXT2/TEXT3/
TEXT4 will be displayed after the FUNCTION menu
disappears. When the set is in CCMUTE mode and the
sound is muted, the CCMUTE will display CC1 content.
Note: when the set has the OSD onscreen, the CCD function
will disappear and will reappear when the OSD moves
off screen.
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALFTONE - -:- -
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION CC1
PARENT CONTROL
PARENTAL GUIDANCE
TV-MA:Mature audience only - this type of rated programs may contain graphic
violence, explicit sexual content and profane language.
FV: This type of rated programs contain Fantasy and cartoon violence.
Violence: This type of rated programs contain violence.
S: This type of rated programs contain sex.
L: This type of rated programs contain offensive language.
D: This type of rated programs contain dialogue with sexual content.
U.S.Movie Rating Chart
NR: This means movie is not rated yet. It is pending government rating approval.
G: General Audience- this type of movie rating means all ages admitted to see the movie.
PG: Parental Guidance Suggested- this type of movie rating means some material may
not be suitable for children.
PG-13: Parents Strongly Cautioned- this type of movie
rating means some material
may not be appropriate for children under 13.
R: Restricted- this type of movie rating means children under 17 of age requires to be
with parent or guardian.
NC-17: This type of movie rating means no one 17 and under admitted.
X: This type of movie rating means adults only.
Parental Guidance technology:
To understand clearly about TV programs rating codes, read the following list.
U.S. TV Program Ratings
NR: Not Rated- this means that programs are not rated or rating does not apply.
TV-Y: For all children- this type of rated programs are designed for a very young
audience, including children from ages 2-6.
TV-Y7: Directed for older children -this type of rated programs may include
comedic violence or mild physical, or may frighten children under the age of 7.
TV-G: General Audience- this type of rated programs contains little or no violence,
no strong language, and little or no sexual dialogue and situation.
TV-PG: Parental Guidance Suggested- this type of rated
programs may contain
limited violence, some suggestive sexual dialogue and situation, and rare language.
TV-14: Parents strongly cautioned- this type of rated programs may contain sexual
content, strong language and more intense violence .
16
17
PARENTAL CONTROL
CHANGE PASSWORD
1. Press CH+/- button to select CHANGE item.
2. Press VOL+/- button to enter INPUT PASSWORD.
3. Input any four digits that you can easily remember.
4. Input the new password again. Then the screen will
display CHANGE SUCCESS.
Note: Once you set the new password for the particular
channel, that channel will be blocked. This way you are
the only one who can access that channel.
PARENTAL GUIDANCE (P.G.) ON/OFF set
1.Press CH+/- button to select P.G. item.
2.Press VOL+/- button to select P.G. ON or OFF.
When BLOCKED is selected, the P.G. function
is activated. When you watch the TV RATING or
MOVIE RATING, the screen is blue and display the
rating that received; when UNBLOCK is selected,
the P.G. function will not be activated. At this
time the rating that set in TV RATING or MOVIE
RATING is not available.
MOVE SELECT MENU RETURN
FUNCTION
CHANGE
P.G. ON
TV RATING
MOVIE RATING
INPUT PASSWORD:
PASSWORD ----
MOVE SELECT MENU RETURN
FUNCTION
CLOCK - -:- -
TIME ON - -:- -
TIME OFF - -:- -
HALFTONE
DURATION 15S
LANGUAGE ENGLISH
CLOSED CAPTION CC1
PARENT CONTROL
PARENT CONTROL
1. Press MENU button to select FUNCTION menu.
2. Press CH+/- button to select PARENT CONTROL
item.
3. Press VOL+/- button to enter PARENT CONTROL.
Note: At first, you should input the default password 0000.
MOVE SELECT MENU RETURN
FUNCTION
CHANGE
P.G. ON
TV RATING
MOVIE RATING
TV RATING SETTING
1.Press CH+/- button to select TV RATING item.
2. Press VOL+/- button to enter TV RATING menu.
3. Press CH+/- button to move the cursor to the
rating you need to set in TV RATING menu,
press VOL+/- button to move the cursor to ALL,
FV, V, S, L or D, then press P.G. button
to set it U or B.
MOVE MOVE MENU RETURN
FUNCTION
ALL FV V S L D
TV-Y U
TV-Y7 U U
TV-G U
TV-PG U U U U U
TV-14 U U U U U
TV-MA U U U U
USE P.G. KEY TO
BLOCK/UNBLOCK
INPUT PASSWORD:
PASSWORD - - - -
INPUT AGAIN:
PASSWORD - - - -
MOVE SELECT MENU RETURN
FUNCTION
CHANGE
P.G. ON
TV RATING
MOVIE RATING
CHANGE SUCCESS
MOVE SELECT MENU RETURN
FUNCTION
G B
PG B
PG-13 B
R B
NC-17 B
X B
MOVE SELECT MENU RETURN
FUNCTION
CHANGE
P.G. ON
TV RATING
MOVIE RATING
PARENTAL CONTROL
MOVIE RATING SETTING
1.Press CH+/- button to select MOVIE RATING item.
2. Press VOL+/- button to enter MOVIE RATING menu.
3. Press CH+/- button to move the cursor to the
rating you need to set in MOVIE RATING menu,
press VOL+/- button to set it U or B.
OTHER FUNCTIONS
HOW TO ENTER AV1, AV2, S-VIDEO, YPbPr,
VGA AND HDMI
1.Press TV/AV button on the remote control to
enter the display as indicated in the menu at the right.
2.Press CH+/- button or press TV/AV button on the
remote control to select TV, AV1, AV2, S-VIDEO,
YPbPr, VGA or HDMI.
HOW TO SET AV1, AV2, S-VIDEO or YPbPr MENU
AV1, AV2, S-VIDEO or YPbPr settings are similar to TV.
Please refer to TV mode menu.
HOW TO SET VGA
PICTURE
1. Press MENU button to select PICTURE menu.
2. Press CH+/- button to select the item that needs adjust.
3. Press VOL+/- button to adjust the selected item.
Note: COLOR-R, COLOR-G and COLOR-B are used
to adjust the color temperature.
SOURCE
TV
AV1
AV2
S-VIDEO
YPbPr
VGA
HDMI
PICTURE
MOVE SELECT MENU RETURN
WARM
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR-R
COLOR-G
COLOR-B
1318
OTHER FUNCTIONS
HOW TO SET VGA
SCREEN
1. Press MENU button to select SCREEN menu.
2. Press CH+/- button to select the item that needs adjust.
3. Press VOL+/- button to adjust the selected item.
Note: The others menu setting is similar to TV. Please
refer to TV mode menu.
SCREEN
MOVE SELECT MENU RETURN
SIZE MODE NORMAL
H-POSITION
V-POSITION
PIXEL CLOCK
PHASE
AUTO ADJUST
- HDMI . The HDMI logo and High-Definition Multimedia Interface is a trademark
or registered trademark of HDMI Licensing.
-This TV can receive the High-Definition Multimedia Interface (HDMI).
-This TV supports HDCP (High-bandwidth Digital Contents Protection) Protocol for
720x480p, 1280x720p, and 1920x1080i resolution.
To get the best picture quality, adjust the DVD Player or Set Top Box’s output resolution
to 1280x720p, and the PC graphics card’s output resolution to 1024x768, 60Hz.
-If the source device has an HDMI output, no other audio connection are necessary
because HDMI-to-HDMI connecting includes both video and audio connections.
-If the source device has a DVI output and no HDMI output, a separate connection is
necessary.
How To Connect
When the source device (DVD player or Set Top Box) supports HDMI
1. Connect the source device to HDMI port of this TV with an HDMI cable (not
supplied with this product).
2. No separate audio connection is necessary.
When the source device (DVD player or Set Top Box) supports DVI
1. Connect the DVD to HDMI port of this TV with a HDMI-to-DVI cable (not supplied
with this product).
TM
1319
2. A separate audio connection is necessary.
Connect DVD AUDIO OUT to VGA
AUDIO IN port of this TV set with DVI
audio cable (not supplied with this product).
How To Use
-If the source device supports Auto HDMI/DVI function,
the output resolution of the source device will be
automatically set to 1280x720p.
-If the source device does not support Auto HDMI/DVI,
you need to set the output resolution appropriately.
To get the best picture quality, adjust the output
resolution of the source device to 1280x720p.
-Select HDMI source by using TV/AV button.
How To Set HDMI
The method to set is similar to VGA or YPbPr.
Note: If the input signal is an HDTV signal, the method
to set is similar to YPbPr. If the input signal is an RGB
signal, the method to set is similar to VGA. The system
will recognize the type of signal automatically.
OTHER FUNCTIONS
COOL
PICTURE
MOVE SELECT MENU RETURN
STRONG
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
HUE
DNR
COLOR TEMP.
HDTV signal
PICTURE
MOVE SELECT MENU RETURN
WARM
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR-R
COLOR-G
COLOR-B
RGB signal
1320 1321
AN T .
EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION
You can connect outside signal source VCR, VCD,
DVD , PC equipment to the TV set.
Antenna Input
1.Connect the coaxial cable input to the back cable
input of the LCD.
2. Connect the antenna to the source coaxial input.
3. Press TV/AV button to select TV mode.
AV input
1.Connect audio video output port on source to
AUDIO IN and VIDEO IN port in TV set.
2. Press TV/AV button to select component
VIDEO mode.
3. Press PLAY button on source to start watching.
S-VIDEO input
If you use S terminal as signal input source,
the image quality will be better than video(AV).
1.Connect S terminal output on source to S terminal
input in TV set.
2.Connect S terminal left/right audio output on source to
the relevant port in TV set.
3.Press TV/AV button repeatedly until the display
mode is S-VIDEO.
4.Press PLAY button on source to start watching..
DTV input
1. Composite terminal (Y/PbCb/PrCr) connect to the
composite output of picture output device (such as
DVD, HDTV TUNER and so on ), the sound is input
from AUDIO IN:
2.Press TV/AV button to select YPbPr mode.
3.Press PLAY button on the external device to start
watching.
HDMI input
1.Connect HDMI signal source output to the HDMI
input in this TV set.
2.Press TV/AV button to select HDMI mode.
3.Press PLAY button on the external device to start
watching.
DVI input
1.Connect DVI signal source output to the HDMI
input in this TV set.
2.Connect audio output to the VGA audio input of
this TV set with DVI audio cable.
3.Press TV/AV button to select HDMI mode.
4.Press PLAY button on the external device to start
watching.
VCR
AU DI O IN
L
R
S- VI DE O
IN
VID EO IN
VCD
AU DI O IN
L
R
S- VI DE O
IN
VIDEO IN
DVD
DVD
L
R
AU DI O IN
Y Cb /P b Cr /P r
HDMI
DVD
HDMI
DVD
DVI
L
R
VGA-AUDIO-IN
USING YOUR TV AS A COMPUTER DISPLAY
VGA -AU DIO I N
VGA
VGA input
1. Connect the VGA output port in the computer to the VGA port in the TV set.
2. Connect the audio cable in computer to VGA AUDIO IN port in TV set.
3. Press TV/AV button to select VGA mode.
4. Turning on the computer, the screen image of the computer will display on the
TV set.
At this time, the TV set can be used as a computer display.
Note:
1. If the temperature of the TV set is rather low, it is normal that there may be some
screen artifacts when the set is first turned on.
2. Nonconforming pixels may occur on the panel, but they have no influence on the
normal function of the display.
3. In the standard operation, It is normal if there is one bright dot or dark dot on the
screen.
VGA
SVGA
XGA
640*480
800*600
1024*768
31.5KHz
37.9KHz
48.4KHz
60Hz
60Hz
60Hz
Mode
Resolution
Horizontal
Frequency
Vertical
Frequency
RESOLUTION:
Note: The above parameters are VESA standard.
22
23
SPECIFICATIONS
LC-2610D/LC-2710D/LC-3210D
The part specifications of this TV set provided here are for reference only.
Difference may occur as product technology is updated.
Model
Screen
Type
TV/VIDEO
NTSC
DTV Y/Pb/Pr
Power
Power consumption
Environment conditions
Accessory
Composite: 480i/p, 576i, 720p,1080i
AC 120V, 60Hz
CVBS, S-VHS, YPb/Pr, YCb/Cr, RGB, HDMI
M
Working temperature:+5 +
Working humidity:
Storage temperature: 15 +
Storage humidity:
℃~ 35℃
20%-80%
- ℃~ 45℃
5%-90%
User’s manual (×1)
Remote control (×1)
Power cord (×1)
Battery (×2)
AV cable (×1)
The design and specifications are subject to change without notice.
A-si TFT active matrix
160°(H)/150° (V) (LC-2610D)
176°(H)/176° (V) (LC-2710D/LC-3210D)
Max.150W(LC-2610D/LC-2710D)
Dimension (W×H×D)(cm)
81.3×62.1×24.6 (included base)(LC-3210D)
68.1×52.5×24.6 (included base)(LC-2610D/LC-2710D)
Max.150W(LC-3210D)
Note:1.If the problem can not be fixed after you check above items. DO NOT attempt
to remove the back cover by yourself.
2.A snapping sound from the cabinet of the TV set can be heard occasionally.
This is normal and is caused by temperature changes of the operating environment
and does not affect the operation of the set.
TROUBLE SHOOTING GUIDE
BREAKDOWN PHENOMENON
PICTURE
SOUND
CHECK FOR
The direction and connection of the
antenna
Direction, station and connection
of the antenna
Interference from electric
appliance. AutomobileMotor,
Vehicle Fluorescence lamp etc.
Volume, Sound mute
The power plug isn't plugged in AC
outlet. The main power isn't turned
on. The setting up of contrast, brig-
htness and volume.
Adjust color control
Adjust channel again
The following problems are not always caused by hardware failure, please use the
follow trouble shooting guide before you call for service:
?
Picture with Snow
No Color
No Picture
Normal
Disturb
Double or Triple Image
Noise
Normal
Noise
No Sound
No Sound
Normal Volume
Normal or Weak Volume
??
Scramble
3.Do not let the TV set stay on a static images, as this can lead to permanent
residual images. If this situation occurs, the TV set may recover normal
automatically after 12 hours if you switch the TV set to dynamic programming.
Color system
Sound system
Video input
Viewable angle
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Haier LC-3210D Operating Instructions Manual

Category
Supplementary music equipment
Type
Operating Instructions Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI