Prynt Pocket Getting Started Quick start guide

Getting Started with the Prynt Pocket

1. Charge your Prynt Pocket. Connect your Prynt Pocket to the included micro-USB cable, and

connect the micro-USB cable to a power source. You can click here to learn how to check the

battery of your Prynt Pocket!

2. Prepare your paper cartridge. Make sure the paper cartridge has the Prynt emblem facing

down. Lift the cartridge hatch gently, and place 10 sheets of ZINK paper with the blue

SmartSheet barcode facing up. Close the paper cartridge hatch- you'll hear a click.

3. Insert the paper cartridge into your Prynt Pocket. Make sure that the side with the Prynt

emblem matches the Prynt logo on the Pocket itself. There is a small arrow on the right side of

the paper cartridge that lines up with an arrow on the side of the Prynt Pocket.

4. Connect your phone. Press and slide the adjustment button on the Prynt Pocket to widen the

clamps. When you can fit your phone in between the clamps properly, close the clamps to make

sure your phone fits securely. Open the Prynt app, and you're ready to make some magic!