Kenwood AT501 Owner's manual

English 2 - 3

Nederlands 4 - 5

Français 6 - 7

Deutsch 8 - 9

Italiano 10 - 11

Português 12 - 13

Español 14 - 15

Dansk 16 - 17

Svenska 18 - 19

Norsk 20 - 21

Suomi 22 - 23

Türkçe 24 - 25

Ïesky 26 - 27

Magyar 28 - 29

Polski 30 - 31

Русский 32 - 33

Ekkgmij 34 - 35

Slovenčina 36 - 37

Українська 38 - 39

´¸∂w

04 - 04

instructions

istruzioni

instrucciones

Bedienungsanleitungen

gebruiksaanwijzing

AX500 AT501 AT502

HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH

40742/2

AX500 for use on KMix

AT501 for use on

Kitchen Machine Chef

AT502 for use on

Kitchen Machine Major

and Cooking Chef

The flexible beater is designed for

creaming and mixing soft ingredients.

It is not to be used with heavy

recipes such as dough or hard

ingredients, for example those

containing fruit stones, bones or

shells.

1 Carefully fit the flexible wiper blade

onto the tool by locating the base of

the wiper blade into the slot , then

feed one side into the groove before

gently hooking the end in place .

Repeat with the other side .

2 With the mixer switched off, insert

the flexible beater and lower the

mixer head. Check the position of

the beater in the bowl . Ideally it

should be in contact with the bowl

surface so that it gently wipes the

bowl during mixing.

3 If the clearance needs to be

adjusted, raise the mixer head and

remove the beater.

4 Using the spanner provided loosen

the nut sufficiently to allow

adjustment of the shaft . To lower

the beater closer to the bottom of

the bowl, turn the beater shaft anti-

clockwise. To raise the beater away

from the bottom of the bowl turn the

shaft clockwise.

5 Tighten the nut.

6 Fit the beater to the mixer and lower

the mixer head. Check its position

(see point 2). Repeat the above

steps as necessary until the beater is

set correctly. Once this is achieved

tighten the nut securely.

Note: Some models are supplied

with 2 different coloured wiper

blades.

care and cleaning

1 Always remove the flexible wiper

blade from the tool before cleaning

.

2 Wash the flexible wiper blade and

tool in hot soapy water, then dry

thoroughly. Alternatively the parts

can be washed in a dishwasher.

Note: Please inspect the condition of

the tool body before and after use

and also regularly inspect the

condition of the wiper blade and

replace it if there are any signs of

wear.

2

English













service & customer care

If you need help with:

●

using your appliance or

●

servicing or repairs (in or out of

guarantee)

콯 call Kenwood customer care on

023 9239 2333. Have your

model number ready - it's on the

underside of your appliance.

●

spares and attachments

콯 call 0844 557 3653.

other countries

●

Contact the shop where you bought

your appliance.

●

This appliance conforms to EC

directive 2004/108/EC on

Electromagnetic Compatibility and

EC regulation no. 1935/2004 of

27/10/2004 on materials intended for

contact with food.

●

Designed and engineered by

Kenwood in the UK.

●

Made in China.

IMPORTANT INFORMATION FOR

CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE

WITH EC DIRECTIVE

2002/96/EC.

At the end of its working life, the product

must not be disposed of as urban waste.

It must be taken to a special local

authority differentiated waste collection

centre or to a dealer providing this

service.

Disposing of a household appliance

separately avoids possible negative

consequences for the environment and

health deriving from inappropriate

disposal and enables the constituent

materials to be recovered to obtain

significant savings in energy and

resources. As a reminder of the need to

dispose of household appliances

separately, the product is marked with a

crossed-out wheeled dustbin.

3

Page is loading ...

Kenwood AT501 Owner's manual

This manual is also suitable for

Kenwood AT501 Owner's manual

in other languages

Related papers

Other documents