Nail Drill M13 - User manual
Model: M13
Certificate No. : UNIA22011511SC-01 UNIA22011510EC-11
TECHNICAL DATA:
Power: 68W
Input voltage: AC 220V
Output voltage: DC 15.6V
Rotation speed: 35,000 RPM Safety in use
1. Please read the following instructions carefully and
follow the information contained therein.
2. Please note that the actual voltage must meet the
requirements of the device.
3. It is not allowed to use the device in a damp / wet place
and when the air humidity level reaches high values.
4. If the device is flooded, immediately disconnect it from
the power source. The device was not flooded can be used again
and must be sent to the manufacturer’s service for inspection and
possible repairs.
5. When the device is not in use, disconnect it from the
power source.
6. If the device gets dusty, eg with milling dust, wipe it dry
or lightly
with a damp cloth. This operation should always be carried out
with the equipment disconnected from the source power.
7. Correct use of the device and compliance with the
instructions helps to extend it significantly lifetime and trouble-
free operation.
8. If the device starts to malfunction - the disturbing
changes should be reported to the manufacturer’s service.
Description of the device
The milling machine has been designed with professional
manicure salons in mind, but also for users who they do their
manicure at home. Friendly design and the handle designed to
give a feeling of high comfort work are the distinguishing
features of the device.
Characteristics of function buttons
1. ON / OFF switch
2. Switch for hand / foot operation
3. Left / right rotation switch
4. Holder for the head
5. Speed change knob
6. Head input socket
7. Transformer (110 or 220V)
8. LCD display
9. Pedal input jack
Products that you will find in the package:
Milling machine body
Milling head
Set of cutters
Foot pedal
Instructions for use
1. Connect the power cord to the appropriate input on the device.
2. Connect the milling machine head to the appropriate input on
the machine.
3. Turn the device on using the ON / OFF button.
4. Turn the knob to the optimal speed setting for the operation.
Turning it clockwise increases the speed of w between 0-35,000
PRM, turning it counterclockwise slows it down.
5. Switch the rotation button to right / left depending on the need
of work.
6. Switch between hand and foot (H / F) operation with the button,
depending on the work you prefer.
7. If you are not using a milling machine - remember to always
disconnect the power cord from the socket.
Tips
1. Remember to connect the device to an outlet with a voltage
appropriate to the device’s requirements. 2. Keep the device
out of the reach of children.
3. Use a dry or slightly damp cloth to clean the device. You
can do this with alcohol or detergent.
4. Use the router away from moisture. Avoid strong
sunlight on the device, so as not to lead to it overheating.
5. Never replace the cutters while the mill is running. It
may cause irreparable damage handles.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Hadewe Veloria Owner's manual
-
GNBLAB Allestrong 270 User manual
-
-
Remington MAN3000US User manual
-
Grizzly G0877 Owner's manual
-
-
South bend SB1063 Owner's manual
-
-
-
