SKYDANCE EB-CV User manual

Type
User manual

This manual is also suitable for

Model Product picture Input/Output jack
Ta: -30
O
C ~ +50
O
C
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
CE,EMC,LVD
EN 62368-1:2020+A11:2020
Max. 4A
12-24VDC
12-24VDC
OutputandInput
Input voltage
Output current
Output power 48-96W
Protection
ModelList
Sensor data
Concealed aluminum housinghand sweep /door control sensing switch, constant voltage output, connect with low voltage LED strip.
Maximum 4A output current, maximum power 96W@24V.
Output PWM frequency: 2000Hz.
1 second on/off light fade.
Apply to cabinet, closet, wine cabinet and other lighting.
PWM frequency 2000Hz
Features
(1) DC Plug Connection
Product name
LVD
Page 1
2023.8
User Manual Ver 1.0.0
EB-CV,ED-CV Sensor
Hand Sweep / Door Control Sensing Switch
Technical Parameters
Output voltage
Operation temperature
Environment and Protection Safety and EMC
EMC standard (EMC)
Certication
Safety standard (LVD)
Gross weight
Size
Package
Wiring Diagram
Reverse polarity
Power adapter
12-24VDC
DC female jack in :
connect to power supply
DC male jack out :
connect to luminaires
Single color LEDstrip
+
361
YYY
361
EB-CV(D)
EB-CV(L)
Sensitive field: ≤7cm
Dimming range: 5 -100%
Dimming curve: Logarithmic
Handsweep sensing switch
Handsweep sensing switch
DC female jack in
DC male jack out
Dupont male jack in
Dupont female jack out
ED-CV(L)
ED-CV(D)
Sensitive field: ≤5cm
Door sensing switch
Door sensing switch
DC female jack in
DC male jack out
Dupont male jack in
Dupont female jack out
0.035kg
L90 x H130mm
Page 2
2023.8
User Manual Ver 1.0.0
Sensing switch installation
When the door open, or no obstacle in front of the sensing switch,
the light turn on gradually;
When the door close, or obstacle in front of the sensing switch,
the light turn off gradually.
ED-CV: Door sensing switchEB-CV: Handsweep sensing switch
Make pendulum action at the front end of the sensing switch:
when hand sweep, the light turn on gradually;
when hand sweep again, the light turn off gradually.
Hold your hand in front of the sensing switch for more than 2 seconds:
The brightness increases or decreases continuously,
the each time the hand is removed and then held again,
the brightness changes in the opposite direction.
1. Make a 20mm diameter hole. 2. Place the sensing switch into the hole.
18mm
26mm
Hole diameter
20mm
Drilling depth
16mm
26mm
26mm
Sensing switch application
Power supply using cabinet constant voltage power supply + junction box
Vo+
Vo
L
N
+
-
OUT
+
OUT OUT O UT OUT OUT
-
+
-
+
-
+
-
+
-
+
-
S
+
12-24 VDC INPUT
MATCH
SENSOR IN (5V)
(Optional accessory)
+
361
YYY
361
+
361
YYY
361
+
361
YYY
361
+
361
YYY
361
Power supply with constant voltage power supply
 + junction box
Note: because the output current of the terminal block is 8A, the maximum current of each output of the junction box is 2A.
Therefore, using constant voltage power supply, the output can be connected to 4 LED strips.
Note: cabinet power supply PBL-60-12 output current is 5A, junction box output maximum current is 2A each way. So the output can connect 2 LED strips.
cabinet power supply PBL-60-24 output current is 2.5A, junction box output maximum current is 2A per circuit. So the output can connect 1 LED strip.
AC100-240V
2Pdistance:3.81mm
Output Current:8A
+
-
OUT
+
OUT OUT O UT OUT OUT
-
+
-
+
-
+
-
+
-
+
-
S
+
12-24VDC INPUT
MATCH
SENSOR IN (5V)
CV0
AC100-240V
PBL-60-12/PBL-60-24 CV0
AWM 2468
2OAWG
2OAWG
(2) Dupont wire connection
AWM 2468
2OAWG
2OAWG
The text line is “positive"
The black line is “negative"
Dupont male connector
(2P spacing 2.54mm)
PowerSupply
12-24VDC
Constant Voltage
Single color LED strip
Single color LED strip
Single color LED strip
Single color LED strip
(Optional accessory)(Optional accessory)
The black line is “negative"
The text line is “positive"
Dupont female connector
(2P spacing 2.54mm)
  • Page 1 1
  • Page 2 2

SKYDANCE EB-CV User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI