MOES BL01-221214 grants you remote access to your smart door lock. It supports multiple passcode options, including permanent, one-time, and time-limited passwords. Easily share dynamic passwords with visitors for temporary access. You can also set up offline passwords for scenarios where Bluetooth connectivity is unavailable.
MOES BL01-221214 grants you remote access to your smart door lock. It supports multiple passcode options, including permanent, one-time, and time-limited passwords. Easily share dynamic passwords with visitors for temporary access. You can also set up offline passwords for scenarios where Bluetooth connectivity is unavailable.
KEYPAD
User Manual
PRODUCT DESCRIPTION TOOLS YOU MAY NEED
INSTALLATION-KEYPAD
INSTALLATION OPTION 1:
WITH DOUBLE-SIDED TAPE
IN THE BOX
TAKE OFF THE KEYPAD
PREPARATION FOR USE
SERVICE WARRANTY CARD
RECYCLING INFORMATION
INSTALLATION OPTION 2:
WITH SCREWS
Long press the unlock button( )and
close the battery cover at the same time,
don't release the unlock button( )until
you hean beeps from the Keypad.
⑵
Keypad is reset successfully when you
hear a beep and release the unlock
button( ).
⑶
DEFAULT ACTIONS:
UNLOCK:
Enter passcode + to unlock
LOCK:
Press to lock.
INDICATOR LIGHT:
Blue light flashes twice then steady:
Password entered correctly, unlocking
Red light: Wrong password
●
●
●
⑴
⑵
Remove the backing of the adhesive at the
back of the mounting plate. Stick the
mounting plate to the place where you wish
to install the Keypad.
Note: Please place the Keypad within 1.5
meter (3 feet) away from the Smart Lock.
●
Mount the bottom of the Keypad to the
mounting plate first like the following left
picture and then press the Keypad against
the mounting plate.
●
Place the mounting plate on the wall at the
position where you wish to install. Use a
pen to mark the two holes on the wall.Note:
Please place the Keypad within 1.5 meter (3
feet) away from the smart lock.
●
Use the provided drill bit to drill two holes
at the marked spots.
●
Insert the plastic anchors into the two holes,
use a hammer to gently tap them in until
they are flush with the wall.
●
Place the mounting plate over the two
screw holes, use the provided screws to
secure the mounting plate against the wall.
●
If you need to take off the Keypad, you
can press the snap fit of the mounting
plate with the screwdriver to remove the
Keypad.
2.Reset:
Mount the bottom of the Keypad to the
mounting plate first like the following left
picture and then press the Keypad against
the mounting plate.
●
Open the battery cover of the Keypad.⑴
Keypad x1
Mounting
Plate x1
Drill Bit (5mm) x1
Drill Hammer Pencil
Anchor x4
●Pull out the battery cover at the bottom.
●Place the battery cover back.
●Insert the batteries. See battery
orientation at the back of the Keypad.
Screw x4Battery AAA x2
STEPS FOR CONNECTING
THE APP TO THE DEVICE
1.Turn on Bluetooth on the mobile.
3. Open MOES App and Click “+”, then
the prompt page will automatically show
on the screen. Click “Add”.
Keypad binding smart door
lock
Make sure your MOES Smart APP has
successfully connected to a smart door
lock.
1.
4. Add the device successfully, you can
edit the name of the device to enter the
device page by click “Next”, and enjoy
your smart life with home automation.
NOTE: The smart lock doesn' t support
multi-channel communication. This means
when the Bluetooth of smart lock is
connected to the Smart phone, or the
Gateway, the Keypad will not be able to
connect to the smart lock. If you fail to
unlock the door with Keypad, you can
always use the App to unlock or lock the
door.
Enter keypad device interface and click
icon, click “Add” to select the smart
door lock to be bound.
2.
Click “Starr Binding”, the binding is
successful.
3.
UNLOCK LOCK
Thank you for your trust and support to our
products, we will provide you with a two-year
worry-free after-sales service (freight is not
included), please do not alter this warranty
service card, to safeguard your legitimate
rights and interests. If you need service or
have any questions, please consult the
distributor or contact us.
Product quality problems occur within 24
months from the date of receipt, please
prepare the product and the packaging,
applying for after-sales maintenance in the
site or store where you purchase; If the
product is damaged due to personal reasons,
a certain amount of maintenance fee shall be
charged for repair.
We have the right to refuse to provide
warranty service if:
1. Products with damaged appearance,
missing LOGO or beyond the service term
2. Products that are disassembled, injured,
privately repaired, modified or have missing
parts
3. The circuit is burned or the data cable or
power interface is damaged
4. Products damaged by foreign matter
intrusion (including but not limited to various
forms of fluid, sand, dust, soot, etc.)
All products marked with the symbol for separate
collection of waste electrical and electronic
equipment (WEEE Directive 2012/19 / EU) must
be disposed of separately from unsorted municipal
waste. To protect your health and the environment,
this equipmentmust be disposed of at designated
collection points for electrical and electronic
equipment designated by the government
or local authorities. Correct disposal and
recycling will help prevent potential
negative consequences for the
environment and human health. To find
out where these collection points are
and how they work, contact the installer
or your local authority.
Maintenance Records
Failure date Cause Of Issue Fault Content Principal
Product Information
Product Name
Product Type
Purchase Date
Warranty Period
Dealer Information
Customer's Name
Customer Phone
Customer Address
Thank you for your support and purchase at
we Moes, we are always here for your
complete satisfaction, just feel free to share
your great shopping experience with us.
If you have any other need, please do not
hesitate to contact us first, we will try to meet
your demand.
BL01
English English English English English English English
English English English English English English English English
1
11 12 13 14 15
2 3 4567
98 10
HOME, SMART MOES HOME 1.APP Download MOES APP
MOES App is upgraded as much more
compatibility than Tuya Smart/Smart Life App,
functional well for scene controlled by Siri,
widget and scene recommendations as the fully
new customized service.
Note: Tuya Smart/Smart Life App still works,
but MOES App is highly recommended)
Mobile number/e-mail address
Region
Obtain verification code
2.Registration or Log in
You have to turn the Keypad Mode off before the
following 3 actions, otherwise these 3 actions
might be failed:
(1) When you have to recalibrate the Smart Lock.
(2) When you have to update the firmware of the
Smart Lock.
(3) When you bind the Keypad.
After the above actions completed, please turn
"Keypad Mode" on.
4. Before updating the new firmware of the Smart
Lock, make sure to turn off "Keypad Mode" on the
Smart Lock setting page and unbind the Smart
Lock on the Gateway page if you have bound a
gateway, or the firmware update will fail. After
updating firmware, turn on "Keypad Mode" if you
have a Keypad and bind the Smart Lock to the
Gateway.
Note:
1. If you fail to add the Keypad in the App,
please reset the Keypad.How to reset the
Keypad?
Long press the unlock icon ( )，take out
the batteries, put them back in and close the
battery cover, don't release the unlock icon
( ) until you hear beeps from the Keypad.
Keypad is reset successfully when you hear a
beep.
2. Indicator light
(1) Blue light flashes twice then steady:
Password entered correctly, unlocking
(2) Red light: Wrong password
3. Before using the Keypad to unlock the
Smart Lock, it's necessary to go to the
Smart Lock App Page, tap the“ Settings” and
enable “Keypad Mode”, so that the Keypad
can unlock the Smart Lock successfully.
OPERATION OF SMART KEYPAD
(1) Online Password
You can set up 3 types of online passwords
including permanent password, one-time
password which expires in 6 hours and
time-limited password when the Bluetooth of
the phone connects the Bluetooth of the
Keypad.
The 3 types of online passwords you can set
up is 50 passwords totally. The maximum
number of passwords for each type you can
set up is 50.
The number of digits of each password
should be within 6 to 10.
(2) Offline Password
If you are far away from the home, the
Bluetooth of the phone and the Bluetooth of
the Keypad is not connected, you can set up
2 types of offline passwords including
one-time password which expires in 6 hours
and time-limited password.
The 2 types of online passwords you can set
up is 20 passwords totally. The maximum
number of passwords for each type you can
set up is 20.
The number of digits of each password
should be 10.Please note that the offline
temporary ne-time or time-limited password
should be used at least one time within 24
hours once it is created. Otherwise the
password will be invalid.
(3) Clearing Code
If you want to delete the offline time-limited
password, you have to get a clearing code
and type them on the Keypad and press the
Unlock icon( ) to clear the offline
password on the Keypad.
Otherwise, you can still unlock the door lock
with offline time-limited password you set
up.
Please note that Clearing Code will clear the
time-limited password that used at least
once. If the offline password hasn't been
used at least one time, it's not ok to clear
them with a clearing code. However the
4. Click the Key icon on the Keypad
page to set up password.Once the Keypad
is set up, it's necessary to go to the Smart
Lock App Page and tap the “Settings” to
turn the “Keypad Mode” on so that the
Keypad can unlock the Smart Lock
successfully.
6.1
@moessmart
@moes_smart @moes_smart
@moes_smart MOES.Official
www.moes.net
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: [email protected]
Manufacturer:
WENZHOU NOVA NEW ENERGYCO.,LTD
Address: Power Science and Technology Innovation
Center, NO.238, Wei 11 Road, Yueqing Economic
Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: [email protected]
Enter the Register/Login interface; tap
“Register” to create an account by entering
your phone number to get verification code
and “Set password”. Choose “Log in”if you
already have a MOES account.
time-limited offline password will be invalid if
it hasn't been used within 24 hours once it's
generated.
(4) Dynamic Password
If you are far away from the home, the
Bluetooth of the phone and the Bluetooth of
the Keypad is not connected, you can
generate a dynamic password which is only
valid 5 minutes and share it with visitors.
1 2 3 4 5 6
封
面
-
1
MOES BL01-221214 grants you remote access to your smart door lock. It supports multiple passcode options, including permanent, one-time, and time-limited passwords. Easily share dynamic passwords with visitors for temporary access. You can also set up offline passwords for scenarios where Bluetooth connectivity is unavailable.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI