2. JUNG
  3. AL2539
AL2539

JUNG AL2539 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the JUNG AL2539 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LED Lighting Technology LED pilot lights
Ref.-no.: ..539..
Operating Instructions
LED pilot lights
1. Warning
Attention!
Electrical equipment must be inbstalled and fitted only by qualified
electricians and in observance of the applicable accident prevention
regulations. Failure to observe the installation instructions may
damage the device and cause fire and hazards.
Stand: Jan-09 240 954 01
LED Lighting Technology LED pilot lights
Ref.-no.: ..539..
2. Fitting
Plug LED pilot light together with frame into insert. The electrical contact
is established through connector (1).
Fig. 1
LED red/green pilot light
LED pilot light with decal information
2
LED Lighting Technology LED pilot lights
Ref.-no.: ..539..
LED floor pilot light
3. Electrical connection
LED pilot light with RGB-LEDs
Connection to L, L‘ and N bzw. F1, F2 and ⊥ of the power supply. (see
separate instructions) Different colours can be selected with the 3-pole
DIP-switch (fig.1,2) on the backside (connection see fig. 2a, 3a):
Fig. 2a Fig. 3a
• 1 0 0 = red
• 0 1 0 = blue
• 0 0 1 = green
• 1 1 0 = violet
• 1 0 1 = yellow
• 0 1 1 = light blue
• 1 1 1 = ivory
3
LED Lighting Technology LED pilot lights
Ref.-no.: ..539..
A "Traffic light function" is possible in the DIP switch position 1 0 1
(connection see fig. 2b, 3b):
Fig. 2b Fig. 3b
• only L´ or F2 are power supplied - red
• L and L‘ or F1 and F2 power supplied: yellow
• only L or F1 power supplied: green
4. Accessories
LED power supply insert:
AC 230 V~ SV 539 LED
AC 9-36 V~ , DC 12-48 V SV 539-948 LED
5. Guarantee
Our products are under guarantee within the scope of the statutory
provisions.
Please return the unit postage paid to our central service
department giving a brief description of the fault:
ALBRECHT JUNG GMBH & CO. KG
Service-Center
Kupferstr. 17-19
D-44532 Lünen
Service-Line: +(49) 23 55 . 80 65 51
Telefax: +(49) 23 55 . 80 61 65
E-Mail: [email protected]
General equipment
Service-Line: +(49) 23 55 . 80 65 55
Telefax: +(49) 23 55 . 80 62 55
E-Mail: [email protected]
KNX equipment
Service-Line: +(49) 23 55 . 80 65 56
Telefax: +(49) 23 55 . 80 62 55
E-Mail: [email protected]
The
-Sign is a free trade sign addressed exclusively to the
authorities and does not include any warranty of any properties.
4
/