2. Epson
  3. OmniLink Merchant Services V3
OmniLink Merchant Services V3

Epson OmniLink Merchant Services V3 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Epson OmniLink Merchant Services V3 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How to register a printer in OMS?
    What to do if a printer is not connected to the network?
    How to connect a printer to the POS terminal?
    How to change the printer setting using T88VI utility?
    How to confirm the endpoint setting on the printer?
    How to reboot the printer?
    How to check if the OmniLink Merchant Service is enabled on the printer?
    How to confirm if receipt data is uploaded successfully?
QuickOMSSetupGuide‐‐‐ConnectPrinterstoOMS
1. CheckifthetargetprinterhasbeenregisteredinOMS,ifnot,registertheprinter.
- LogintotheOMC(OmniLinkManagementConsole):
https://service.omnilinkworld.com/admin/login
- From“TeamandGroups”,selectcorrespondTeamthenGroup
- ClickcorrespondStore
- FromDevicelist,checkifthisprinter’sserialnumberislisted
- Ifnot,clickthe“Add”button
- Fillintheprinterinformationandclick“Save”
PrinterSerialNumberlabel:
-
2. ConnecttheprintertonetworkviaLANcable,powerprinteron,waitfor30seconds
untilitprintsoutIPaddresschit.CheckthattheprintedIPaddressiscorrect.

3. ConnecttheprintertothePOSterminalandrunthePOSapplicationtomakesureitcan
printsuccessfullytotheprinter.
4. ForWindowsuser,runT88VIutilityonthePCtochangetheprintersetting
*Thisstepcanbeskippediftheprinterwasconfiguredbeforeshippingtothestore
*T88VIutilitycanbedownloadfromhttps://download.epson‐
biz.com/modules/pos/index.php?page=single_soft&cid=6039&pcat=3&pid=4983
- Enable“OmnilinkMerchantService”
- ConfigureProxyserversettingifnecessary
- Settimeconfiguration
- Click“Set”toapplythesetting
5. ForiOSandAndroiduser,theycandownload“EPSONTMUtility”applicationfrom“App
Store”or“GoogleStore”andruntheapplicationtoconnecttotheprinterandchange
belowsettings
- Enable“OmnilinkMerchantService”
- ConfigureProxyserversettingifnecessary
- Settimeconfiguration
6. Accesshttp://xxx.xxx.xxx.xxx/config_epson_cloud_service.cgitoconfirmtheendpoint
settingontheprinter.
ProductionEnvironmentIP:omnilinkworld.com
Port:443
7. Reboottheprinter
8. AfterIPaddresschitisprinted.Pressandholdthe“Reset”buttononthebackofprinter
foraround5secondsuntilthe“StatusSheet”isprinted.
9. Checkthe“OmniLinkMerchantService”fieldonthestatussheetasbelow
Ifitisnotprintedasabove,confirmthenetworksettingoftheprinter,itmightbe
necessarytopower‐cycletheprinteronceortwicetoallowittoestablishtheinternet
connection.
10. Confirmreceiptdataisuploadedsuccessfully.
- FromPOSapplication,sendaprintjobtotheprinter,confirmprintoutcorrectly.
- LogintotheOMC(OmniLinkManagementConsole)
https://service.omnilinkworld.com/admin/login
- From“TeamandGroup”,selectcorrespondGroup,clickcorrespondStore
- From“Device”selection,clickthecorrespondprinter(identifiedbyserialnumber)
- Under“DeviceDetail”,checkif“Received”appearsin“Transaction”andthelatest
transactiondateistoday
-
- Clickthe“Play”buttontodisplaythereceivedreceiptdata.
*
OmniLinkMerchant Service
Server
:omnilinkworld.com
ServerStatus
:Connection Enable
- Comparethedisplayedreceiptwithprintedreceipt:
+ifnodataappearinthePrintedTextarea,useT88VIutilitytocheckthe“Time
Configuration”oftheprinter,ifthetimeisnotcorrect,receiptdataisnotsent.
- Ifthedisplayedreceiptdatamatchestheprintedreceiptdata,meanstheprinter
setupiscompletedsuccessfully.
/