Check the following to make sure the printer was successfully shared.
The printer object in the Printers folder now has a shared indicator. For example, in Windows NT
4.0, a hand appears under the printer object.
Browse Network Neighborhood. Find the host name of the server and look for the shared name
you assigned to the printer.
7.
The printer is now shared and ready to be installed on network clients.
Setting up the printer for sharing (Windows XP)
Click Start Control Panel Printers and Other Hardware Printers and Faxes.1.
Select the printer you just created.2.
Click File Sharing.3.
Select the Network setup wizard.4.
Click OK.5.
Browse Network Neighborhood. Find the host name of the server and look for the shared name you
assigned to the printer.
6.
The printer is now shared and ready to be installed on network clients.
Installing a shared printer on network clients
Using the point and print method
This method is usually the best use of system resources. The server handles driver modifications and the
print job processing. This lets network clients return to programs much faster.
With this method, a subset of driver information is copied from the server to the client computer. This is just
enough information to send a print job to the printer.
On the Windows desktop of the client computer, double-click Network Neighborhood.1.
Locate the host name of the server computer, and then double-click the host name.2.
Right-click the shared printer name, and then click Install.3.
Wait for the driver information to copy from the server computer to the client computer, and for a new
4.