SPECIFICATIONS
Printed in U.S.A. H20 0510
Carter-Hoffmann is a trademark
of Carter-Hoffmann LLC.
CH6, CH9 & CH18
COOK & HOLD CABINETS
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to base. All seams turned in to
eliminate raw edges.
Gray vinyl bumper set
in channel on each side of cabinet.
CABINET MATERIAL...All stainless steel
double-wall, insulated construction.
BASE FRAME...stainless steel full depth
caster bolsters with stainless steel perimeter
supports welded to bolsters.
CASTERS...5” diameter casters with rubber
tread. Double ball bearing swivel. Zerk
grease fittings. Plate mounted and bolted to
base. Two casters fitted with brakes.
INSULATION...2” thick high density
continuous wrap-around type fiberglass
insulation.
DOOR...Welded double panel stainless steel
door; turned-in seam pocket construction.
Filled with 2” thick high density fiberglass
insulation. Field reversible. Dutch doors are
standard on CH18.
HINGES...Adjustable self-closing,
edgemount hinges with chrome plate finish.
GASKET...High temperature silicone gasket
mounted to cabinet.
LATCH...Heavy-duty edgemount latch with
magnetic catch.
TRAY RACK ASSEMBLIES...Removable
stainless steel tray racks with solid stainless
steel angle slides. Slides welded to
assemblies and spaced on 3” centers.
THERMOMETER...Digital thermometer with
remote sensing bulb for cabinet operating
temperature. Digital temperature displays in
temperature window of current mode (cook
or hold) by pushing “view actual temp”
button.
CONTROLS...User-friendly digital controls
with digital readout displays for settings.
Master on/off switch with “start/cancel”
button for cook cycles. Touchpad to view
actual temperature. Separate controls &
displays for cook temperature and hold
temperature. Eighteen hour digital timer
display shows cook temperature in count
down mode during cook cycle. During hold
cycle, automatically switches to count up.
HEATING SYSTEM...Top mounted blower
heater for even heat distriubution. High
impedence protected, internally cooled fan
motor. Full range thermostat and on/off
switch with power indicating light and
“start/cancel” button. Water pan in top of
cabinet provides moderate passive
humidification.
HEAT DUCT SYSTEM... Precision
engineered interior heat duct system to
provide gentle heat circulation throughout
cabinet to caramelize roasts for less food
shrinkage and more attractive appearance.
ELECTRICAL CHARACTERISTICS...
All models are 60hz, single phase.
PERFORMANCE...Capable of slow cooking
to a maximum temperature of 325
O
F (161
O
C). Capable of holding at a range of 100
O
F
(38
O
C) to 200
O
F (93
O
C). Preheat to 160
O
F
(71
O
C) in approximately 25 minutes.
Temperature variance less than 5
O
F(3
O
C),
top to bottom.
ACCESSORIES/OPTIONS...
Stacking kit for CH6/CH6 or CH6/CH9.
CH6/CH stack available with legs only
Legs in lieu of casters
Menu card holder
Tamper resistant fasteners
Locking door latch
208 volt operation, all models
120 volt operation, CH6 & CH9 only
230 volt CE operation
Carving station with cutting board &
warming lamp (CH6 only)
Model Capacity Approximate Spacing Inside Working Overall Dimensions Caster Shipping
Number 18”x26” Meat Height Height Depth Width Diameter Weight
Trays Capacity in mm in mm in mm in mm in mm in mm lbs kg
CH6 6 80 lbs 3 76 18
1
/
8
460 38
1
/
2
948 35
1
/
4
895 24 610 5 127 312 142
CH9 9 120 lbs 3 76 27
1
/
4
692 47
1
/
2
1207 35
1
/
4
895 24 610 5 127 344 156
CH18 18 240 lbs 3 76 54
1
/
2
1384 78 1981 35
1
/
4
895 24 610 5 127 460 209
FOOD SERVICE EQUIPMENT
COOK & HOLD CABINETS
CARTER-HOFFMANN
Specifications subject to change through product improvement & innovation.
CH6
Front View
CH18
Front View
All Models
Top View
CH18
(shown with optional side bumpers)
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
CH9
Front View
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
(847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Model Volts Watts Amps Plug
CH6 240 4100 17.1 NEMA 6-20P
CH9 240 4100 17.1 NEMA 6-20P
CH18 240 6100 25.4 NEMA 6-30P
CH6, CH9 & CH18
COOK & HOLD CABINETS
Since 1947, Foodservice Equipment That Delivers!
EASY-TO-USE DIGITAL CONTROLS... Control cooking
and holding with separate dial controls and digital
display. Temperature range of 100
O
F to 200
O
F for hold
cycle and 100
O
F to 325
O
F for cook cycle. Eighteen hour
timer counts down in cook cycle. When cook cycle is
over, cabinet automatically switches to hold cycle and
timer counts up.
REMOVABLE HEATING SYSTEM... Fully contained top
mounted heating unit is removable for easy service.
Heat is forced through an interior baffle for optimal air
flow and even circulation throughout cabinet.
FEATURES & BENEFITS
1551 McCormick Avenue, Mundelein, Illinois 60060
Tel. (847)362-5500
.
(800)323-9793
.
Fax (847)367-8981
www.carter-hoffmann.com
CARAMELIZATION IS KEY... Precision engineered
heating system with gentle, consistent blower heat
carmelizes roasts and seals in juices for minimal
shrinkage and more portions. And it produces a more
natural, attractive product with superior taste.
CH6
CH18
VENTILATION HOOD NOT REQUIRED... Because
these cabinets cook at a lower temperature than
standard convection ovens, a hood is not needed (check
local codes).
ALL STAINLESS STEEL CONSTRUCTION... Welded,
turned-in seam construction for long durable life and
ease of cleaning and safety.
-
1
-
2
CARTER-HOFFMANN CH18 Datasheet
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
CARTER-HOFFMANN RTH22 Datasheet
-
CARTER-HOFFMANN CH6 Operating instructions
-
-
-
-
-
-
-
-