ZLINE Dual Built-In Refrigerator User manual

Brand: ZLINE

Model: Dual Built-In Refrigerator

Type: User manual

ZLINE Dual Built-In Refrigerator offers an elevated refrigeration experience, seamlessly combining innovative features and exceptional craftsmanship to transform your kitchen. With precise temperature control, flexible storage options, and energy-efficient operation, this refrigerator redefines food preservation and convenience. Its dual-compressor system ensures optimal cooling in both the refrigerator and freezer compartments, maintaining freshness and quality for all your perishables.

DUAL BUILT-IN

REFRIGERATOR

www.zlinekitchen.com

Installation Manual

ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your dreams

is never out of reach. Through our unique designs and unparalleled quality, we’re dedicated to

providing you an elevated experience in the heart of your home. With an endless selection of

features and ﬁnishes, our inspiration is your reality.

ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury

designs and professional features into everyone’s homes. Because we continually strive to improve

our products, we may change speciﬁcations and designs without prior notice.

WARNING: This product can expose you to chemicals including nickel, which is known to the

State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

DUAL INSTALLATION COMPONENTS

!!"#$%&'()#$$#)&*'%+*,-*'.')(

!"#$%&'() *+,-./--.012- 03&

4)&563'7$883) 8(9 +3&

4)&563'7%(:3) *;,-./0.2< ;3&

#5)3: =/.0< ;-

>3"'3)7')?9 8@5 0

Adhesive Foam Divider

Metal Lower Bracket

Divider Trim

Plastic Upper Bracket

INSTALLATION

Product Speciﬁcations

TOOLS AND PARTS

Part Image Description Quantity

Adhesive Foam Divider 1/8” x 15 3/4" x 68 7/8" 1

Plastic Upper Bracket 1/8” x 2" x 4 1/2" 3

Metal Lower Bracket 1/16" x 1 5/8" x 2 1/4" 2

Screw Phillips head 20

Center Trim 73 3/4" long 1

INSTALLATION

Tools and Parts

Attach the Adhesive Foam Divider

INSTALLATION

ATTACH THE ADHESIVE FOAM DIVIDER

1. Approach the refrigerators from behind and angle one of them out.

2. Next, measure 2 1/8” from both the top and left corner of the side of the unit.

3. Using a level, ensure the divider remains parallel to the edge of the unit.

4. Peel the protective sticker off the divider and carefully press into place.

! "##$%&'()*$(*' '("$#)*/%

Adhesive

Foam

Divider

2 1/8”

INSTALLATION

Mount Brackets

MOUNT UPPER BRACKETS AND LOWER BACK BRACKET TO CONNECT THE

REFRIGERATORS

1. On the back of one unit near the top, ﬁnd the location for one plastic mounting

bracket and screw into place with two screws, ensuring the small arm is pointed in.

2. Move to the top of the unit to install the other two plastic mounting brackets with

two screws.

3. At the back base of the unit, install the metal lower bracket by unscrewing the two

existing screws, sliding into place and re-screwing both screws. Unscrew the same

two screws on the other unit and set aside for later.

! +%,-.'()*/00-, 0/#+1.)(%#'2%$*3./%0/#+1.)%)*%+*''.+)%)4.%/.5/&6./#)*/(

A F5)3:7$883)7G)&563'#7&"D7%(:3)7G)&563'7'C&'7&)37E(?"E7'(75(""35'7':(7)3H)?E3)&'()#7'(E3'C3),

Connect Brackets

INSTALLATION

CONNECT UPPER BRACKETS TO CONNECT THE REFRIGERATORS

1. Realign both refrigerators so they are ﬂush and line up with the opening where

they will be installed.

2. Finish installing the plastic mounting bracket on the back with the other two

screws to connect both units. Do the same with both brackets on top.

!1'2'() "--./%0/#+1.)(%)*%+*''.+)%)4.%/.5/&6./#)*/(

A 4)?"E7'C37':(7)3H)?E3)&'()7#?D37GI7#?D3,

A BH'3)79&6?"E7#$)37'C&'7'C3I7&)37?"7&%?E"93"'7#5)3:7'C37$883)7G)&563'#7'(7'C37('C3)7)3H)?E3)&'(),

CONNECT LOWER BRACKETS TO CONNECT THE REFRIGERATORS

1. At the back base of the unit, ﬁnish installing the metal lower bracket by screwing

in the two screws set aside earlier.

2. Install the last metal lower bracket on the front base of both units using the re-

maining four screws.

A BH'3)79&6?"E7#$)37'C&'7'C3I7&)37?"7&%?E"93"'7#5)3:7'C37%(:3)7G)&563'#7'(7'C37('C3)7)3H)?E3)&'(),

!1'2'() $*3./%0/#+1.)(%)*%+*''.+)%)4.%/.5/&6./#)*/(

Install Divider Trim

INSTALL DIVIDER TRIM

After ensuring both units are in alignment and everything is level, insert divider trim

between both units and lightly pound into place with the back of your ﬁst.

!1'2'()*% .')./%)/&,%0.)3..'%/.5/&6./#)*/(

A BH'3)79&6?"E7#$)37'C&'7'C3I7&)37?"7&%?E"93"'7?"#3)'753"'3)7')?97G3':33"7)3H)?E3)&'(),

Scan the QR code to watch an installation video.

INSTALLATION

Push Into Place

PUSH INTO PLACE

1. Before pushing into place, install the necessary power and water connections

(refer to your RBIV-30 installation manual).

2. Uninstall the door on the left unit and reorientate the inside drawers and hinges

so the handle to the door pulls out to the left — opposite of the door on the right

unit — then reinstall the door (refer to your RBIV-30 installation manual).

3. Carefully push the dual unit into the cabinet and ensure there is a 1/8” gap on

either side.

(

! 3/4&'()*#&-*,-5,')-,$#6,4*'( )*%)4.%+#0&'%

A =&6378(:3)7(H7'C37)3H)?E3)&'(),

A J$#C7)3H)?E3)&'()#7?"7'C375&G?",

A =&637:&'3)75(""35'?("#7(H7'C37)3H)?E3)&'(),

Width of cabinet cutout: 59 7/8”

Width of dual unit: 59 5/8”

1/8”

Scan the QR code to watch an installation video.

WARNING

WARNING: ZLINE RBIV-30 refrigerators are top-heavy and weigh 342

pounds. The dual unit weights close to 700 pounds. Take care when

installing the product; two-person assembly is highly recommended.

INSTALLATION

Leveling Refrigerators

LEVELING REFRIGERATORS

1. After pushing the dual unit into the cabinet, the feet need to be raised in order to

secure the product to the anti-tip brackets provided with the RBIV-30 installation kit.

2. Raise the front feet ﬁrst to reduce risk of the product falling frontward.

3. Using a drill and bit shown below, adjust each foot as needed in a clockwise

motion.

4. After adjusting the feet, use a level to ensure the dual unit is level in both width and

depth.

)

! 7-8-9'()* /.5/&6./#)*/(

A S#?"E7D)?%%7&"D7'C37G?'7&#7#C(:"7G3%(:T73"E&E373&5C7(H7'C37)3H)?E3)&'()U#7&DV$#'3)7#C&H'7?"7'$)"7&"D7%3@3%7'C37)3H)?E3)&'(),7Q>WXT7>>YZR

A BDV$#'7'C37E&87G3':33"7'C37H$)"?'$)37&"D7K3H)?E3)&'()7'(70NO7?",7Q+99R

!"#$%&'

*C37H)("'7&"D7)3&)7%3@3%?"E7%3E#7C&@37&79&\?9$97C3?EC'

&DV$#'93"'7(H707MN0<7!",7Q/-99R,

K&?#?"E7'C37)3H)?E3)&'()7&G(@3707MN0<7?"7Q/-99R79&I

D&9&E37'C37H)("'7&"D7)3&)7%3@3%?"E75(98("3"'#,

!H7E)3&'3)7C3?E' ?#7)3]$?)3DT7'C37?"#'&%%3)79&I7)&?#37

K3H)?E3)&'()7("7&7#C33'7(H78%I:((D7()7)$""3)#,

Front

leveling

foot

1/4” bit

Rear

leveling

foot

WARNING

WARNING: The front and rear legs have a maximum height adjustment of

1 9/16”. Raising the units higher may damage the front and rear leveling

components. If greater height is required, the installer may raise the units on

a sheet of plywood or runners.

INSTALLATION

Installation Completion

INSTALLATION

INSTALLATION COMPLETE

Refer to your RBIV-30 installation manual as needed for other installation procedures.

!7*,-$.)&*'%&'()#$$#)&*'

A >(98%3'37?"#'&%%&'?("75("H3)7'(78)3@?($#78&E3#7)3E&)D?"E7&#7('C3)7?"#'&%%&'?("78)(53D$)3#,

Need to purchase a part or accessory for your ZLINE product?

Visit ZLINEparts.com, ZLINE's ofﬁcial parts distribution partner.

www.zlinekitchen.com

1-614-777-5004

[email protected]

1.0.0

ZLINE Dual Built-In Refrigerator User manual

ZLINE Dual Built-In Refrigerator User manual

ZLINE Dual Built-In Refrigerator User manual

Related papers

Other documents