auray PBM-HYD-19 Owner's manual

Type
Owner's manual

Auray PBM-HYD-19 is a metal-frame piano bench with a hydraulic adjustable height mechanism, allowing for precise adjustment to the perfect playing position. Its thick padding ensures comfort during lengthy sessions, while its sturdy construction and tilt-stability design provide güvenlik. With a load capacity of up to 330 pounds, it can accommodate various users. Assembly is simple, and the bench features a black powder coat finish for durability.

Auray PBM-HYD-19 is a metal-frame piano bench with a hydraulic adjustable height mechanism, allowing for precise adjustment to the perfect playing position. Its thick padding ensures comfort during lengthy sessions, while its sturdy construction and tilt-stability design provide güvenlik. With a load capacity of up to 330 pounds, it can accommodate various users. Assembly is simple, and the bench features a black powder coat finish for durability.

Metal Frame Piano Bench
with Hydraulic Adjustable Height
PBM-HYD-19
Owners Manual
Owner’s Manual
Thank you for choosing Auray.
Aurays PBM-HYD-19 adjustable piano bench uses
hydraulics to smoothly raise and lower the seat to the
perfect height. Precise adjustment allows you to put the
seat to the height for your best performance. The bench
features thick padding for comfort throughout lengthy
sessions at the keyboard.
!
Warnings
2PBM-HYD-19
This product has been tilt-stability tested. Auray is not
responsible for injury due to improper use. The bench must be on
a level surface with all four feet touching the surface at the same
time.
Please read and follow these instructions, and keep this
manual in a safe place.
Make sure that this product is intact and that there are
no missing parts.
Make sure all parts are secure before using.
Do not exceed the load capacity.
All images are for illustrative purposes only.
Owner’s Manual
Seat 1
Adjustable column 2
Base 3
M6 hex wrench 4
M6 hex screws and lock
washers (×4) 5
M4 hex wrench 6
M4 hex screws, flat washers,
and lock washers (×4) 7
Overview
4
6
5
7
3
3PBM-HYD-19
1
2
1. Use the M4 hex wrench
to remove the screws, at
washers, and lock washers
from the seat. 1
2. Align the holes at the top of the
base with the screw sockets in
the seat.
3. Place the flat washer and the
lock washer onto the hole, and
then insert the screw.
Use the M4 hex wrench to
.eruces litnu swercs eht nethgit
2
4. Use the M6 hex wrench to
remove the screws and lock
washers from the bottom of the
adjustable column.
5. Align the base with the base
attachment holes in the
column. Make sure the foot
pads are facing up. 3
6. Drop the M6 hex screw and
lock washer through the top
hole, and use the M6 hex
wrench to tighten the screws
to the adjustable column. 4
Owner’s Manual
Assembling the Piano Bench
3
4
2
1
4PBM-HYD-19
Owner’s Manual
Adjusting the Height
5PBM-HYD-19
Pull the adjustment lever toward the seat to activate the hydraulic
lift, and adjust the seat height from 17 to 23.25 inches.
Use your body weight to lower the seat height.
23.35 in.
17 in.
Owner’s Manual
6PBM-HYD-19
Specifications
Construction Material: Steel (frame and mechanisms)
Finish: Black powder coat
Height Adjustment Range: 17 to 23.25 in. (43.2 to 59 cm)
Dimensions (W × D): 19 × 12 in. (48.3 × 30.5 cm)
Base Dimensions (W × D): 17.75 × 12 in. (45.1 × 30.5 cm)
Weight: 17 lb. (7.7 kg)
Load Capacity: Up to 330 lb. (149.7 kg)
Owner’s Manual
7PBM-HYD-19
This AURAY product is warranted to the original purchaser to be
free from defects in materials and workmanship under normal
consumer use for a period of one (1) year from the original purchase
date or thirty (30) days after replacement, whichever occurs later.
The warranty providers responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the
providers discretion, of any product that fails during normal use of
this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with
specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Auray Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Auray along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchasers own risk and expense.
For more information or to arrange service, visit
www.aurayaudio.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
AURAY is a registered trademark of the Gradus Group.
© 2023 Gradus Group LLC. All Rights Reserved.
One-Year Limited Warranty
GG1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

auray PBM-HYD-19 Owner's manual

Type
Owner's manual

Auray PBM-HYD-19 is a metal-frame piano bench with a hydraulic adjustable height mechanism, allowing for precise adjustment to the perfect playing position. Its thick padding ensures comfort during lengthy sessions, while its sturdy construction and tilt-stability design provide güvenlik. With a load capacity of up to 330 pounds, it can accommodate various users. Assembly is simple, and the bench features a black powder coat finish for durability.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI