2. Crystorama
  3. KEN-8305-VG
KEN-8305-VG

Crystorama KEN-8305-VG User manual

  • Hello! I've reviewed the Assembly Instruction for the Crystorama KEN-8305-VG light fixture. This document contains crucial steps for proper installation of the fixture, including mounting the diffuser and panels, securing it to the ceiling, and changing bulbs. I'm here to help answer any questions you might have about this process or the specific features of the product.
  • What type of bulbs are recommended?
    Is this fixture suitable for damp locations?
    How do you change the bulb?
ASSEMBLYINSTRUCTIONMODEL#KEN-8305-VG
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Howtoinstall
6.Installthebulb(notincluded)intothesocket.
This fixture is Damp rated
Youwillneed4-MediumBaseBulb
40WattsFrostedbulbRecommended
60WattsMax.
USELEDBULBSFOREXTENDEDUSE
1.Slidetheglassdiffuserontothebottomofmetal
frameandsecureitwithclips.
2.Slidetheglasspanelsinsidethemetalframeand
secureitwithclips.
3.Removescrew#2fromeachofthehooks.Place
onehookontothebottomofthebracketonthe
metalframebyinsertingscrew#1intothe1st
holeonthebracket.
Whileholdingthehookinplace,placethetop
metalringoverthetopofthebracketbyaligning
theholeonitwiththe2ndholeonthebracket
andhook.Secureitwithscrew#2.Repeatthis
forotherhooks.
OUTLETBOXSCREWS
MOUNTINGPLATE
MOUNTINGSCREWS
CEILINGPAN
METALTAB
BALLNUT
SOCKET
SCREW#2
TOPMETALRING
GLASSPANEL
(4PCS)
GLASSDIFFUSER
BRACKET
METALFRAME
CLIP
CLIP
HOOK
4.Installthemountingscrewsintothematching
holesinthemountingplate.Securethemounting
platetotheoutletboxwiththeoutletboxscrews.
5.Raiseceilingpanallowingthemountingscrews
toprotrudethroughtheholesintheceilingpan,
andsecurewiththeballnut.
7.Placethemetalframeovertheceilingpanby
insertingthehooksintotheholesofthemetal
tabontheceilingpan.
20-5/8’’
3-1/8’’
3-7/8’’
15-1/4’’
GLASSPANEL
GLASSDIFFUSER
5-1/4’’
22-1/2’’
15’’
1sthole 2ndhole
2ndhole
SCREW#1 Howtochangethebulb:
Raisethemetalframeupovertheceilingpanand
turnitsidewaytotakeitdown.Installthenewbulb
andputthemetalframeback.
Crystorama.com
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
C.(1)-Ceilingpan
D.(4)-Socket
E.(4)-Screw
ASSEMBLYINSTRUCTIONMODEL#KEN-8305-VG
C
BA
D
E
F
B.(2)-Ballnut#XRF8305VGBANUT
H
I
J
F.(1)-Topmetalring
G.(4)-GlasspanelL15-1/4’’xW3-7/8’’xH3-1/8’’ #XRF8304GLA15.25IN
H.(1)-GlassdiffuserW20-5/8’’ #XRF8304DIFF20.625IN
I.(4)-Hook
G
J.(1)-Metalframe
Crystorama.com
/