User Manual for Apple watch charging cable
First of all, thanks sincerely for buying this product
1) For your safely, please read this manual carefully before using this
product
2) Please make sure that write down the selling date and sales shop’s name
on the warranty, and put it away with operation manual, keep them properly
Scope of application
This charging is suitable for Wireless charger .
Standard Accessories
Wireless charger*1
User manual*1
Technical Data
Product Name：Wireless charger
Model：XMG-XM3-03，WI096001
Input：DC 9V/3A OR PD30W(9V/3A)
Output 1 MagSafe: 15.0W Max
Output 2 Wireless: 5.0W Max
Output 3 Apple watch: 5.0W Max
Total: 25.0W Max
Usage
1. Before charging the device, check whether the technical parameters (voltage
and current) of the device match the characteristics of wireless charging.
2. Place the device into the wireless charging port.
3. Plug the wireless charge into the charging device (DC 9V/3A OR PD30W(9V/3A)
). Your device is about to start charging.
4. Disconnect the wireless charging and charging device ports after use.
Attention
1. This product requires the correct installation of the DC 9V/3A OR
PD30W(9V/3A) charger.
2. Only plug the cord of the product into easily accessible sockets, from which
you can quickly disconnect the product if a problem occurs.
3. Do not use the product if it is damaged. Never touch the product with wet or
damp hands.
4. Do not use the product in a humid room or in the rain.
5. Never place any metal objects such as keys or paper clips into the product
openings.
6. To avoid malfunctions or damage to the product, do not let the product drop,
do not squeeze the product, do not cut the product surface nor put too much
pressure on it. Protect the product from excess humidity, water and other
liquids. If the product comes into contact with water, excess humidity or other
liquids, do not use it otherwise there is a risk of electric shock.
7. Do not expose the product to heat sources, direct sunlight, do not place it on
heaters, stoves or other heat sources such as a dashboard in a car in the
summer.
8. Do not use the product unattended. The surface of the product may get hot
during operation.
9. Do not cover the product with any objects during operation.
10. Do not use the product immediately when it is moved from a cold are to a
hot area. Water condensation can occur and may damage the product. Wait till
the product reaches room temperature. It may take several hours.
11. Do not attempt to modify, repair or disassemble the product in any way. If the
product is damaged, do not use it.
12. Never use aggressive detergents, alcohol or other chemical cleaning solutions,
as they may damage the surface or functionality of the product.
13. Disconnect all attached cables before cleaning.
14. Do not immerse the product in water or other liquid. There are no
user-serviceable parts inside the product.
15. Never disassemble the product. Keep the product out of the reach of children.
Never allow children or people with disabilities to use electrical appliances
without supervision.
16. Make sure the children do not play with the plastic wrapper. They can
swallow small parts and suffocate.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide
reasonable protection against harmful interference in a residential installation.
This
equipment generates uses and can radiate radio frequency energy and, if not
installed
and used in accordance with the instructions, may cause harmful interference to
radio
communications. However, there is no guarantee that interference will not occur
in a
particular installation. If this equipment does cause harmful interference to radio
or
television reception, which can be determined by turning the equipment off and
on, the
user is encouraged to try to correct the interference by one or more of the
following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
/