XtremeMac XMG-XM3-03 User manual

Brand: XtremeMac

Model: XMG-XM3-03

Type: User manual

XtremeMac XMG-XM3-03 is a versatile wireless charger that allows you to charge your Apple devices quickly and efficiently. With a total output of 25W, it can simultaneously charge your iPhone with up to 15W of power, your Apple Watch with 5W, and your AirPods with 5W. The compact and portable design makes it easy to take with you wherever you go, whether you're at home, in the office, or on the road.

User Manual for Apple watch charging cable

First of all, thanks sincerely for buying this product

1) For your safely, please read this manual carefully before using this

product

2) Please make sure that write down the selling date and sales shop’s name

on the warranty, and put it away with operation manual, keep them properly

Scope of application

This charging is suitable for Wireless charger .

Standard Accessories

Wireless charger*1

User manual*1

Technical Data

Product Name：Wireless charger

Model：XMG-XM3-03，WI096001

Input：DC 9V/3A OR PD30W(9V/3A)

Output 1 MagSafe: 15.0W Max

Output 2 Wireless: 5.0W Max

Output 3 Apple watch: 5.0W Max

Total: 25.0W Max

Usage

1. Before charging the device, check whether the technical parameters (voltage

and current) of the device match the characteristics of wireless charging.

2. Place the device into the wireless charging port.

3. Plug the wireless charge into the charging device (DC 9V/3A OR PD30W(9V/3A)

). Your device is about to start charging.

4. Disconnect the wireless charging and charging device ports after use.

Attention

1. This product requires the correct installation of the DC 9V/3A OR

PD30W(9V/3A) charger.

2. Only plug the cord of the product into easily accessible sockets, from which

you can quickly disconnect the product if a problem occurs.

3. Do not use the product if it is damaged. Never touch the product with wet or

damp hands.

4. Do not use the product in a humid room or in the rain.

5. Never place any metal objects such as keys or paper clips into the product

openings.

6. To avoid malfunctions or damage to the product, do not let the product drop,

do not squeeze the product, do not cut the product surface nor put too much

pressure on it. Protect the product from excess humidity, water and other

liquids. If the product comes into contact with water, excess humidity or other

liquids, do not use it otherwise there is a risk of electric shock.

7. Do not expose the product to heat sources, direct sunlight, do not place it on

heaters, stoves or other heat sources such as a dashboard in a car in the

summer.

8. Do not use the product unattended. The surface of the product may get hot

during operation.

9. Do not cover the product with any objects during operation.

10. Do not use the product immediately when it is moved from a cold are to a

hot area. Water condensation can occur and may damage the product. Wait till

the product reaches room temperature. It may take several hours.

11. Do not attempt to modify, repair or disassemble the product in any way. If the

product is damaged, do not use it.

12. Never use aggressive detergents, alcohol or other chemical cleaning solutions,

as they may damage the surface or functionality of the product.

13. Disconnect all attached cables before cleaning.

14. Do not immerse the product in water or other liquid. There are no

user-serviceable parts inside the product.

15. Never disassemble the product. Keep the product out of the reach of children.

Never allow children or people with disabilities to use electrical appliances

without supervision.

16. Make sure the children do not play with the plastic wrapper. They can

swallow small parts and suﬀocate.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may

cause undesired operation.

Warning: Changes or modifications not expressly approved by the party

responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide

reasonable protection against harmful interference in a residential installation.

This

equipment generates uses and can radiate radio frequency energy and, if not

installed

and used in accordance with the instructions, may cause harmful interference to

radio

communications. However, there is no guarantee that interference will not occur

in a

particular installation. If this equipment does cause harmful interference to radio

television reception, which can be determined by turning the equipment off and

on, the

user is encouraged to try to correct the interference by one or more of the

following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

XtremeMac XMG-XM3-03 User manual

XtremeMac XMG-XM3-03 User manual

XtremeMac XMG-XM3-03 User manual

Related papers

Other documents