havit HV3278 User manual

havit
Brand
havit
Model
HV3278
Type
User manual

The Havit HV3278 is a versatile step light with a built-in LED that provides bright and energy-efficient illumination for outdoor areas. With its IP54 rating, it can withstand harsh weather conditions, making it suitable for gardens, pathways, and decks. The color temperature can be adjusted between 3000K (warm white), 4000K (neutral white), and 5500K (cool white) to suit your preference or the ambiance you want to create. The HV3278 has a lifespan of 3 years and comes with a replacement warranty for added peace of mind.

The Havit HV3278 is a versatile step light with a built-in LED that provides bright and energy-efficient illumination for outdoor areas. With its IP54 rating, it can withstand harsh weather conditions, making it suitable for gardens, pathways, and decks. The color temperature can be adjusted between 3000K (warm white), 4000K (neutral white), and 5500K (cool white) to suit your preference or the ambiance you want to create. The HV3278 has a lifespan of 3 years and comes with a replacement warranty for added peace of mind.

Product Specications
Model No. HV3278T-BLK-240V HV3278T-WHT-240V HV3279T-BLK-240V HV3279T-WHT-240V HV3278T-BLK-12V HV3278T-WHT-12V HV3279T-BLK-12V HV3279T-WHT-12V
Name Shim
Material Aluminium
Colour Black White Black White Black White Black White
IP Rating IP54
Input Voltage 240v AC 12v DC
Protection Class (Requires Earth) (Low Voltage)
Lamp Base Built in LED
Lamp Wattage 1x 12w 1x 14w 1x 12w 1x 14w
Colour Temp TRI Colour - 3000k, 4000k, 5500k
Lumens 960lm, 1020lm, 1080lm 1120lm, 1150lm, 1190lm 960lm, 1020lm, 1080lm 1120lm, 1150lm, 1190lm
CRI > 80
Wiring Parallel
Dimmable No
Warranty 3 Years Replacement*
HV3278 Dimensions HV3279 Dimensions
HV3278 Mounting Base HV3279 Mounting Base
Contact Details: Warranty Terms & Conditions* Additional Information
Shim Step Light Installation Instructions
143 Beauchamp Road
Matraville NSW 2036
Australia
Tel: 02 9381 8300
Fax: 02 9666 8881
Email: [email protected]
Web: www.havit.com.au
Important Safety Issues:
• This product must be installed by a qualied electrician according to AS/NZS 3000.
• Ensure all electrical mains are disconnected before any installation.
• Modication of this product will void any warranty.
• Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
• When installing low voltage ttings, Voltage to tting must be within +or- 5% of voltage required and cannot be installed more than 25m from LED Driver, if not within this allowance warranty will be voided.
• Aluminium and 304SS ttings must not be installed within 5km of any salt water environments.
• All o-rings and seals must be in place correctly to maintain warranty.
• These instructions may be updated at any time due to product improvements, Please visit website for most current installation instructions.
Must be installed by a licensed electrician
Steps for Installation:
1. Make sure that the electrical circuit is free of voltage (master switch o)
2. Loosen allen screws on side of tting and remove face and set aside.
3. Install base plate to wall in desired location, Seal all holes including Cable entry and Mounting screws
4. 240v Models, use wire with earth; connect the earth rst, then live and neutral wire
5. 12v DC Models - Using an appropriate 12v DC LED Driver - DO NOT CONNECT LIGHT FITTING DIRECTLY TO 240V
6. Connect the cable - If more than one tting installed, wiring must be done in parallel.
7. Fitting is preset to 3000k, to change slide switch to desired colour temperature.
8. Reattach face to base plate making sure allen screws are tight to avoid water penetration
9. Apply silicon around edge of tting to prevent any water from getting inside to electrical connections.
10. All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
57.5
2x Ø5Ø13
12
195
113
57.5
10
126
2x Ø5Ø13
12
292
113
92
126
  • Page 1 1

havit HV3278 User manual

havit
Brand
havit
Model
HV3278
Type
User manual

The Havit HV3278 is a versatile step light with a built-in LED that provides bright and energy-efficient illumination for outdoor areas. With its IP54 rating, it can withstand harsh weather conditions, making it suitable for gardens, pathways, and decks. The color temperature can be adjusted between 3000K (warm white), 4000K (neutral white), and 5500K (cool white) to suit your preference or the ambiance you want to create. The HV3278 has a lifespan of 3 years and comes with a replacement warranty for added peace of mind.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents