Alpha Digital T101 User guide

Brand: Alpha Digital

Model: T101

Type: User guide

Alpha Digital T101 is a portable power supply that lets you charge your devices on the go. It features a 5.5mm 12V DC port for DC appliances, AC outlets for AC devices, and USB sockets for USB devices. The T101 also has an LED flashlight with three modes: flashlight, blink, and SOS. You can charge the T101 using an AC power source, a solar panel, or a vehicle charging cable.

T101 Portable Power Supply Quick Start Guide

How To Use The Power Supply

Using with DC 12V Devices

Note: The power supply will automatically turn off after 30 seconds if it

does not detect a connected device.

Using with AC Devices

Connect the AC appliance to one of the T101 power supply's AC outlet.

Using with USB Devices Using the LED Flashlight

1. Turn on

Double press " " button to switch on the LED lamp.

2. Change light modes

Double press " " button to switch between modes Flashlight / Blink / SOS.

2. To turn off

Long press " " button 3 seconds to switch off the LED lamp.

Connect the USB cable to one of the T101 power supply's USB

sockets. Connect the other end to your USB device.

LED Lamp

USB C

Connect the DC appliance to the power supply's 5.5mm 12V DC port,

press the " " button to switch on DC output. Long press the " " button

for 3 seconds to switch off.

Long press button for 3 seconds to switch on the power button and the

unit will start providing power to your appliances. Long press the button for

3 seconds to switch off.

"AC"

Press the button to turn on USB output. Long press the button for

3 seconds to switch off.

" "

Note: The power supply will automatically turn off after 30 seconds if it

does not detect a connected device.

T101 Portable Power Supply Quick Start Guide

Charging The Power Supply

With an AC Power Source With a Vehicle Charging Cable

Charging by solar panel (Solar Panel is not included,

recommend to choose 18V/35W~ 40W solar panels)

With Solar Panel

Connect one end of the charging lead to the DC Input Port.

Start your vehicle's engine and connect the other end of the charging lead to

your vehicles auxiliary/cigarette lighter port.

Charging by Cigarette Lighter Adapter

Warning: The AC output ports can not be used when charging the power station

For any support or comments concerning our products,

please send an email to: [email protected] or toll free number in the USA: 800-473-5156

AC outlet

AC Adapter (charger) 15V/2A

Charging by AC Adapter

Input Charging

DC 13V~22V/2.0A Max

Using the included AC Wall Charger, plug the unit into any wall outlet to

charge the unit. You will know the unit is charging when "IN" ton the LED

display is blinking. The unit is fully charged when "IN" stop blinking and

LED display displays "100%". After the unit is fully charged, please

remove the AC wall charger in time.

Place your solar panel where it will get as much direct sunlight as possible.

Plug the output of the solar panel into the input of the unit to start charging.

You will know the unit is charging when the "IN" on the LED display is blinking.

The unit is fully charged when "IN" stop blinking and LED display displays "100%".

Alpha Digital T101 User guide

Alpha Digital T101 User guide

Alpha Digital T101 User guide

Related papers

Other documents