Toshiba HDTS124XZSWA, HDTS106XZSWA, HDTS112XZSWA User manual

  • Hello! I am an AI chatbot trained to assist you with the Toshiba HDTS124XZSWA User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GMAA00384011
593696-A1
07/12
English/Español
Toshiba Solid-State Drive
PC Upgrade Kit
User's Manual
2
Regulatory Information
FCC Information
Product Name: Toshiba Solid-State Drive PC Upgrade Kit
FCC notice “Declaration of Conformity Information”
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment, not expressly approved
by Toshiba or parties authorized by Toshiba could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference
that may cause undesired operation.
3
Contact
Canadian ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
NMB -003 du Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Safety icons
This manual contains safety instructions that must be observed to avoid potential
hazards that could result in personal injuries, damage to your equipment, or loss
of data. These safety cautions have been classified according to the seriousness of
the risk, and icons highlight these instructions as follows:
Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
Indicates a potentially hazardous situation which, if not avoided, may result
in property damage.
Provides important information.
Address: TOSHIBA America Information Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618-1697
Telephone: (949) 583-3000
NOTE
4
Copyright
© Copyright 2012 Toshiba America Information Systems, Inc. All rights
reserved. All other products, services, names and logos used are trademarks,
registered trademarks or service marks of their respective owners. While Toshiba
has made every effort at the time of publication to ensure the accuracy of the
information provided herein, product specifications, configurations, and system/
component availability are all subject to change without notice. For the most up-
to-date information about your Toshiba product, visit Toshiba's web site at
toshibastorage.com.
Trademarks
Microsoft, Windows, Windows XP, Windows Vista, and Windows 7 are either
registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
All other brand and product names are trademarks or registered trademarks of
their respective companies.
5
Contents
Chapter 1: Product Information...................................................7
System Requirements...............................................7
Components .............................................................8
Capacity Calculation..................................................9
Chapter 2: Installation................................................................ 10
Precautions.............................................................10
Installing the SSD to a Notebook PC.......................10
Connecting the SSD to your PC ........................10
Replacing the internal HDD with the SSD .........12
Installing the SSD to a Desktop PC .........................13
Connecting the SSD to your PC ........................13
Configuring the SSD as the primary
boot device .................................................15
Migrating PC data to the SSD .................................15
Chapter 3: Other Information.................................................... 19
Toshiba Support .....................................................19
Before you call ..................................................19
Contacting Toshiba .................................................20
Toshiba’s technical support Web site................20
6
Contents
Toshiba voice contact .......................................20
Warranty .................................................................20
Three (3) year standard limited warranty for
computer accessories and electronics ........20
Obtaining warranty service................................20
7
Chapter 1
Product Information
System Requirements
Microsoft
®
Windows
®
7, Windows Vista
®
, or Windows
®
XP
Available USB 3.0 Port or USB 2.0 Port
IMPORTANT: Toshiba recommends that you install the latest service
packs and updates on your computer to obtain the highest
performance and reliability.
Compatibility may vary depending on user's hardware configuration
and operating system.
NOTE
NOTE
8
Product Information
Components
Components
Toshiba SSD (pre-loaded with PC data migration
software)
CD-ROM (includes PC data migration software
(from PC to SSD), User's Manual (this
document), and Warranty information)
USB-SATA Conversion cable for PC data
migration (from PC to SSD)
SATA Signal Cable for mounting SSD into
Desktop PC
SATA Power Cable for mounting SSD into
Desktop PC
Bracket and screws for mounting SSD into
Desktop PC
Quick Installation Guide
9
Product Information
Capacity Calculation
Capacity Calculation
One Gigabyte (1GB) means 10
9
= 1,000,000,000 bytes and One
Terabyte (1TB) means 10
12
= 1,000,000,000,000 bytes using
powers of 10. A computer operating system, however, reports
storage capacity using powers of 2 for the definition of 1GB= 2
30
=
1,073,741,824 bytes and 1TB = 2
40
= 1,099,511,627,776 bytes, and
therefore shows less storage capacity. Available storage capacity
(including examples of various media files) will vary based on file
size, formatting, settings, software and operating system and other
factors.
10
Chapter 2
Installation
Precautions
Keep the SSD in the anti-static bag (shipping configuration)
until you are ready to install.
To minimize static electricity, touch the computer case before
handling the SSD.
Handle the SSD with care. Do not touch the connectors.
Do not disassemble the SSD or remove the label, doing so will
void the SSD warranty.
Make sure the SSD you are installing has a storage capacity
larger than data currently stored on your PC.
Toshiba is not responsible for data loss or damage caused by
replacing the storage devices.
Installing the SSD to a Notebook PC
Connecting the SSD to your PC
The first step in installing the SSD to a notebook is to connect the
SSD to the PC in preparation for migrating the data from the
existing drive.
NOTE
11
Installation
Installing the SSD to a Notebook PC
To connect the SSD to your PC:
3 Connect the USB-SATA Conversion cable:
With the PC turned off, connect the two standard USB
connectors of the USB-SATA Conversion cable to your
PC.
(Sample Image) Connect USB-SATA Conversion cable to PC
Connect the remaining end of USB-SATA Conversion
cable to the SSD.
This cable is recommended for initial PC data migration only and not
to be reused for other purposes.
(Sample Image) Connect USB-SATA Conversion cable to SSD
4 Turn on your PC, and make sure all programs are closed.
NOTE
12
Installation
Installing the SSD to a Notebook PC
5 Open Windows Explorer.
You will see the SSD volume mounted.
(Sample Image) Explorer window with SSD
6 Follow the instruction in “Migrating PC data to the SSD” on
page 15 to move the data from the computer’s HDD to the
SSD.
Replacing the internal HDD with the SSD
To replace the internal HDD with the SSD:
1 After the data migration has finished and the computer has shut
down, detach the USB-SATA Conversion cable from the SSD
and from your PC.
2 With the computer turned off, remove the HDD from the PC's
storage bay.
13
Installation
Installing the SSD to a Desktop PC
3 Install the SSD in the PC by aligning the SATA connector of
SSD with the SATA connector in the PC and then gently and
firmly connecting the SATA connectors.
(Sample Image) Replace the HDD with the SSD
4 Close the cover of the storage bay, and turn on your PC.
Your SSD is now available to boost your PC’s performance.
Installing the SSD to a Desktop PC
Connecting the SSD to your PC
To connect the SSD to your PC:
1 Make sure the PC is turned off.
2 Mount the SSD onto the bracket as shown.
(Sample Image) Mount the SSD onto the bracket
3 Mount the bracket into the 3.5 inch bay of your PC.
14
Installation
Installing the SSD to a Desktop PC
4 Find the available SATA connector in your PC, and connect the
SSD using the SA
TA signal cable.
(Sample Image) SATA signal cable
5 Connect the SSD and the PC power supply using the SATA
power cable.
(Sample Image) Desktop SATA connections
6 Turn on your PC, and make sure all programs are closed.
7 Open Windows Explorer.
You will see the SSD volume mounted.
(Sample Image) Explorer window with SSD
15
Installation
Migrating PC data to the SSD
8 Perform the data migration procedure: “Migrating PC data to
the SSD” on page 15.
At the end of the data migration procedure, the PC shuts down.
You may then remove the HDD from your PC or keep it as
secondary storage.
Configuring the SSD as the primary boot device
After you have transferred the data from the previous storage to the
SSD, you can configure the SSD as the primary boot device.
To configure the SSD as the primary boot device:
1 Turn on your PC.
2 In the BIOS menu, configure SSD as the primary boot device.
(For more information, refer to system help or the manual for
your PC.)
3 Restart your PC.
Your SSD is now available to boost your PC performance.
Migrating PC data to the SSD
Please make sure to back up all data on your storage device prior to
running the data migration software.
Before you can do this procedure, you must connect the SSD to
your notebook or desktop computer, see “Installing the SSD to a
Notebook PC” on page 10 or “Installing the SSD to a Desktop PC”
on page 13.
To migrate PC data to the SSD:
1 Be sure all programs are closed.
2 Install the Data Migration Software as follows:
In Windows Explorer, locate the Data Migration Software
folder in the SSD volume.
Double-click setup.exe, and follow the screen prompts.
3 Perform Data Migration.
Make sure no other programs are running.
Launch the migration software.
NOTE
16
Installation
Migrating PC data to the SSD
Select the PC's HDD as the source storage, and select the
SSD as the destination storage.
(Sample Image) Source and destination selection screen
Click Start.
The following screen will be displayed.
(Sample Image) Confirmation screen
Click OK to confirm the message and perform the data
migration.
17
Installation
Migrating PC data to the SSD
Your PC reboots and the migration software begins the process. The
progress bar is displayed.
(Sample Image) Progress screen
At the completion of the migration process, the message below will
be displayed.
(Sample Image) Complete and shut down confirmation screen
18
Installation
Migrating PC data to the SSD
Click OK to finish the migration process and shut down
your computer.
You can now proceed with the next installation step for your
computer. For notebooks, see “Replacing the internal HDD
with the SSD” on page 12. For desktop computers, see
“Configuring the SSD as the primary boot device” on page 15.
19
Chapter 3
Other Information
Toshiba Support
If you require help or are having problems operating your product,
you may need to contact Toshiba for additional technical assistance.
Before you call
Since some problems may be related to software, it is important that
you investigate other sources of assistance first. Try the following
before contacting Toshiba:
Review the documentation supplied with your product.
If a problem occurs when you are running software
applications, consult the software documentation for
troubleshooting suggestions. Contact the software company’s
technical support department for assistance.
Consult the reseller or dealer from whom you purchased your
product. They are your best resource for current information
and support.
20
Other Information
Contacting Toshiba
Contacting Toshiba
Toshiba’s technical support Web site
For technical support, or to stay current on the most recent software
and hardware options for your product and for other product
information, be sure to regularly check the Toshiba Web site at
support.toshiba.com.
Toshiba voice contact
For technical support, call the Toshiba Customer Support Center:
Within the United States at (888) 592-0944
Outside the United States at (949) 583-3305
Warranty
Three (3) year standard limited warranty for computer accessories and
electronics
This product is covered by a three (3) year Standard Limited
Warranty. A copy of the warranty is pre-installed on the CD-ROM
or can be viewed online at pcsupport.toshiba.com/accessories3yr.
Obtaining warranty service
Customers located in the fifty United States and District of
Columbia may obtain warranty service by visiting the Toshiba
Acclaim Web site at acclaim.toshiba.com or by contacting the
telephone support center at (888) 592-0944.
Customers located outside the fifty United States and District of
Columbia may obtain warranty service by contacting the telephone
support center at (949) 583-3305.
/