Mixx Audio ChargeSpot Quick start guide

Brand: Mixx Audio

Model: ChargeSpot

Category: Mobile device chargers

Type: Quick start guide

Mixx Audio ChargeSpot is a wireless charging solution for your Qi-enabled smartphone. It features a 1.5m USB charging cable, a wireless charging surface, and an LED indicator light. The ChargeSpot can be used to charge your smartphone quickly and easily. Simply place your smartphone on the wireless charging surface and the LED indicator light will turn green to indicate that charging has begun. The ChargeSpot will enter standby mode when the phone is taken off, and the LED indicator light will change back to blue.

Mixx Audio ChargeSpot is a wireless charging solution for your Qi-enabled smartphone. It features a 1.5m USB charging cable, a wireless charging surface, and an LED indicator light. The ChargeSpot can be used to charge your smartphone quickly and easily. Simply place your smartphone on the wireless charging surface and the LED indicator light will turn green to indicate that charging has begun. The ChargeSpot will enter standby mode when the phone is taken off, and the LED indicator light will change back to blue.

QUICK START GUIDE

CHECK

ChargeSpot with attached 1.5m USB charging cable.

ChargeSpot

Wireless charging

surface

1.5m USB charging

cable

LED Indicator Light

Connect your ChargeSpot to your mobile phone wall

charger using the 1.5m USB charging cable. Once

connected, the LED Indicator Light will shine BLUE.

LET’S START

LET’S POWER

1

2

3

3

ChargeSpot

Place your Qi-enabled smartphone at on top of the

Wireless Charging Surface of your ChargeSpot.

When positioned correctly, the LED Indicator Light will

turn GREEN and the smartphone will begin to charge.

When the phone is taken o your ChargeSpot,

the ChargeSpot will enter standby mode and the

LED Indicator Light will change back to BLUE.

A BLUE ashing LED Indicator Light means either:

1. Smartphone is not on the ChargeSpot correctly or

2. The ChargeSpot is too hot

LET’S CHARGE

3

3

3

2

ChargeSpot

Operate your ChargeSpot as normal but ensure that

the power adapter you are using is compatible with

Fast Charge Technology.

Your ChargeSpot will intelligently detect whether or

not your phone supports Fast Charging and supply it

with the necessary power.

For best results use a 9V 1.8A / QC2 / QC3

power adapter.

LET’S FAST CHARGE

ChargeSpot

Do not disassemble, expose to water, or intense heat.

Do not place in close proximity to strong magnetic

elds or strips such as, ID cards, bank cards etc.

Keep at least 20cm away from implanted medical

devices (such as pacemakers and cochlear implants)

to prevent potential magnetic interference.

Please keep away from children and pets.

Do not continue to use your ChargeSpot if damaged.

LET’S BE SAFE

ChargeSpot

This product can be recycled.

Products bearing this symbol must NOT be

thrown away with normal household waste.

Take the product to a collection point designated for

recycling of electronic devices.

Find out more about return and collection points

through your local authority.

LET’S RECYCLE

ChargeSpot

For technical support or to download this user guide

visit www.mixxcharge.com

MWCS-QSG01

1
2
3
4
5
6
7
8

Mixx Audio ChargeSpot Quick start guide

Brand: Mixx Audio

Model: ChargeSpot

Category: Mobile device chargers

Type: Quick start guide

Mixx Audio ChargeSpot is a wireless charging solution for your Qi-enabled smartphone. It features a 1.5m USB charging cable, a wireless charging surface, and an LED indicator light. The ChargeSpot can be used to charge your smartphone quickly and easily. Simply place your smartphone on the wireless charging surface and the LED indicator light will turn green to indicate that charging has begun. The ChargeSpot will enter standby mode when the phone is taken off, and the LED indicator light will change back to blue.

Download PDF

Other documents