Assembly Instructions
EMMER
Dining Table For 6
VERSION 1.1
Page 2 of 8
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
EMMER Dining Table For 6
20 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
SUPPORT BAR 1
LEFT ONNECTOR 1
RIGHT CONNECTOR 1
LEFT LEG PART 1 1
RIGHT LEG PART 1 1
LEFT LEG PART 2 1
RIGHT LEG PART 2 1
GLASS TABLE TOP 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
WRENCH 1
SCREW 4
NUT 4
PLASTIC WASHER 4
M8 × 30 MM BOLT 12
LOCK WASHER 12
WASHER 12
ALLEN KEY 1
TIME # OF PEOPLE DIFFICULTY
#
EMMER Dining Table For 6 Page 3 of 8
1
NOTE: Make sure to place the products on a
soft area or soft surface once assembling to
protect them from damage.
×4 ×4
EMMER Dining Table For 6 Page 4 of 8
2
×8
EMMER Dining Table For 6 Page 5 of 8
3
×4
#
EMMER Dining Table For 6 Page 6 of 8
4
Fully tighten all bolts after
turning upright.
!
100%
85%50%
#
EMMER Dining Table For 6 Page 7 of 8
×4
5
#
EMMER Dining Table For 6 Page 8 of 8
5
×4
Adjust levelers on
legs as needed.
!
Structural integrity is warranted only if all
fasteners are properly installed & tightened.
The glass top is placed and maintained at
the right position as per instructions.
/
