Assembly Instructions
EMMER
Round Dining Table
VERSION 1.1
Page 2 of 6
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
EMMER Round Dining Table
15 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
LEG FRAME (NOTCH UP) 1
LEG FRAME (NOTCH DOWN) 1
GLASS TABLE TOP 1
DOWEL 1
CROSS PLATE 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
M6 × 25 MM BOLT 8
SCREW 4
NUT 4
PLASTIC WASHER 4
ALLEN KEY 1
TIME # OF PEOPLE DIFFICULTY
#
Page 3 of 6
EMMER Round Dining Table
1
NOTE: Make sure to place the products on a
soft area or soft surface once assembling to
protect them from damage.
×4 ×4
#
#
Page 4 of 6
EMMER Round Dining Table
3
Make sure the cross plate aligns with the
holes of their insert before tightening the
bolts into it.
!
2
#
Page 5 of 6
EMMER Round Dining Table
4
× 8
Fully tighten all bolts after
turning upright.
!
100%
85%50%
#
#
Page 6 of 6
EMMER Round Dining Table
5
×4
6
×4
Adjust levelers on
legs as needed.
!
Structural integrity is warranted only if all
fasteners are properly installed & tightened.
The glass top is placed and maintained at
the right position as per instructions.
/
