2. Baxton Studio
  3. CS003C-Natural Oak/Light Grey-7PC Dining Set

Baxton Studio CS003C-Natural Oak/Light Grey-7PC Dining Set, CS003C-Black/Cream-7PC Dining Set, CS003C-Walnut/Light Grey-7PC Dining Set Assembly Instructions

  • Hello! I have read the assembly instructions for the CS003C Dining Chair. This document provides a detailed guide for assembling the chair, including a parts list, hardware list, and step-by-step instructions with images. I understand the cautions about not over-tightening bolts and keeping hardware out of reach of children. If you have any questions about the assembly process or any other aspect of the chair, please don't hesitate to ask.
  • What should I do before assembling?
    When should I fully tighten the nuts and bolts?
    What precaution should be taken with the hardware?
1. Do not FULLY-TIGHTEN the nut or nut bolt until all nut
or bolt is ready assembled.
2. Do not OVER-TIGHTEN the nut or nut bolt to avoid
causing damages to the thread.
3. Keep all hardware part out of reach of children.
PRODUCT CODE : CS003C DINING CHAIR
Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all
part is complete, before you assemble. Place all wooden furniture part on a clean and flat soft
surface to prevent from being scratched. Follow the figure to start assembling.
CAUTIONS : 6 PCS
1 PC
CUSHION SEAT 3
1 PC
C
SPRING WASHER 1/4"
ALLEN KEY (M4) LONG
5
4
ASSEMBLY INSTRUCTIONS
ITEM DESCRIPTION
PART LIST
ASIDE LEG FRAME - L & R JCBC SCREW M6 x 50MM
QTY ITEM
2 PCS 1
2
HARWARE LIST
DESCRIPTION QTY
10 PCS
CSK SCREW M4 x 25MM 8 PCS
CORNER BLOCK 4 PCS
D
COMPLETED CHAIR ASSEMBLY
CAP FRAME
B1 PC
4 PCS
JCBC SCREW M6 x 30MM
64 PCS
WOOD BUTTON Ø14.5 x 9MM
Step 1 :
C
2
1
3
Step 2 :
6x
Step 3 :
Step 4 :
2
5
3
4x
4x
6
8x
D
4
B
A
FRONT
BACK
ITEM NO : Flora Dining Table
/