Davis Instruments Line Snubber Operating instructions

INSTRUCTIONS

1468_WEB-B September 2023

#1468 Line Snubber 22"

(#1463 Line Snubber 15"

discontinued in 2013)

Line Snubber™ is a rubber shock absorber for your

boat’s docking lines and mooring ropes. Continuous

shock from wind and wave action can cause docking

lines to fray, surfaces to wear, cleats to pull out. Line

Snubber helps reduce stress on your lines and cleats.

Sailors and other boaters will find many uses for the

Line Snubber, from anchor snubbing to trailering. Can

be used to lash a tiller, tie down a halyard, or rig a

boom preventer. Use Line Snubbers on parallel lines

to maximize their effectiveness. Line Snubbers can

help secure a dingy in place or keep one steady while

being towed. They work for fishing lines, too. Line

Snubber is available in both 15" and 22" lengths (38

and 56 cm). Molded of highest quality rubber for years

of service. Economically packaged in pairs.

Line Snubbers may also be purchased in bulk, ideal

for commercial applications such as fishing fleets:

1468b Line Snubber 22, bulk pack of 50 snubbers

Davis Instruments

3465 Diablo Ave., Hayward, CA 94545 U.S.A.

Phone (510) 732-9229 • Fax (510) 732-9188

www.davisinstruments.com

Download PDF