Maxworks STST1780 User manual

Brand
Maxworks
Model
STST1780
Type
User manual
SBR-T2015
15 Bin Table Top
Parts Rack
Instruction Manual
Read this manual before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL
Specifications
Materials Molded Polyethylene Plastic
Bin Interior Dimensions 5" D x 3.5" W
Weight Capacity 5 lb per Bin, 75 lb total for rack
Assembly Precautions
1. Assemble only according to these instructions. Improper assembly can
create hazards.
2. Weight capacity and other product capabilities apply to properly and
completely assembled product only.
Use Precautions
1. This product is not a toy. Do not allow children to play this item.
2. Use as intended only.
3. Do not exceed listed weight capacity, loaded from bottom up.
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing
product failure.
5. Maintain product labels and nameplates. These carry important safety
information.
Assembly Instructions
1. Attach the right and left Stands (2) to the Rack (1), using Bolts (7),
Washers (6) and Nuts (8). See Figure A.
2. Tap the Plugs (5) into each end of both Stands (2). See Figure A.
3. Click the colored Bins (4-1, 4-2 and 4-3) into place over the hooks on the
Rack (1). See Figure B.
4. Do not overload the individual Bins, especially those in the top row.
This could cause the Bin Rack to tip over.
5. After assembly, label each Bin via the Name Plate Holder (3). (For
example: Nut M5, Washer 5mm, Bolt M5x10, Nails, etc.)
6. Slip the Name Plate Holder off the front of the Bin.
7. Place a label between the Name Plate Holder’s plastic sleeve.
8. Snap the Name Plate Holder back in place. See Figure C.
Parts List and Diagram
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Maxworks STST1780 User manual

Brand
Maxworks
Model
STST1780
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents