Nissan 999F1-KV000 User manual

Brand: Nissan

Model: 999F1-KV000

Type: User manual

Nissan 999F1-KV000 is a Fog Lamp Kit designed for use with Frontier, Xterra, and Pathfinder vehicles manufactured from 2009 onwards. This kit includes all the necessary components to upgrade your vehicle's lighting system, including fog lamp assemblies, a combination switch, and mounting hardware. With this kit, you can enhance your visibility during inclement weather conditions like fog, rain, or snow, making your driving experience safer and more comfortable.

DESCRIPTION: Fog Lamp Kit

APPLICATION: Frontier, Xterra and Pathfinder (2009~)

PART NUMBER: 999F1 BV000 - Frontier (with Steel Bumper) fog lamp kit

999F1 KV000 - Frontier (with Colored Facia) and Xterra fog lamp kit

999F1 XV000 - Pathfinder fog lamp kit

KIT CONTENTS:

Combi Switch

Front Fog Lamp Finisher

Fog lamp assembly (RH/LH)

Fog lamp assembly

Fog lamp assembly (RH/LH)

Hex Bolt (Shorter)

Hex Bolt (Longer)

U-Shape Nut

Spring Clip

II Replacement Template

A B C D E

F G H I J

TOOLS REQUIRED:

●

Flat tip screwdriver

●

10mm socket

●

Phillips screwdriver

●

10mm wrench

PRE-INSTALLATION CAUTIONS/NOTES:

●

Dealer Installation Recommended. Instructions refer to Service Manual.

26150 EA000

62256/7 EA800

Quantity and Application

Description

Item

26150/5 EA800

25560 ET11E

BV000

GENUINE PARTS

Service Part Number

INSTALLATION INSTRUCTIONS

81-46616-5G

12-41 0009U

15-54 0007U

26150/5 EA500

81-46616-2G

XV000

KV000

999V2 AW000

Page 1 of 7 999F1 XV000II 7/12/11

INSTALLATION PROCEDURE:

NOTE : Steps 1 ~ 4 apply to all applications.

2) Remove lighting and turn signal switch.

While pressing tabs (A), pull switch

toward driver's door (B).

RH/LH - Remove inner fender.

NOTE: Step 5 not necessary for most

Frontier models.

NOTE: Removing the tire/wheel may allow

better access for inner fender removal.

Remove 3 screws (A) from lower steering

column cover then remove the upper

cover (B).

Install kit supplied Lighting and Turn

Signal Switch.

Install the steering column upper and lower

covers using the original screws.

Pathfinder and Xterra

Fig 2

Fig 3

Fig 1

Page 2 of 7 999F1 XV000II 07/12/2011

RH/LH - Remove foglamp covers/inserts.

Frontier

Pathfinder

Xterra

Fig 5

Fig 6

Frontier

Fig 4

Page 3 of 7 999F1 XV000II 07/12/2011

RH/LH - Locate and untape the fog lamp

wiring harness connectors.

Xterra

Frontier

Fig 7

Fig 8

Pathfinder

Fig 9

Page 4 of 7 999F1 XV000II 07/12/2011

NOTE :

RH/LH - Install fog lamp assemblies.

Frontier only: Short bolt must be used on top

mount.

Frontier (Steel Bumper)

Xterra/Frontier (Colored Bumper)

Pathfinder

Fig 10

Fig 11

Fig 12

Page 5 of 7 999F1 XV000II 07/12/2011

RH/LH - Connect harness to fog lamp.

Frontier

Xterra

Pathfinder

Fig 13

Fig 14

Fig 15

Page 6 of 7 999F1 XV000II 07/12/2011

10)

11)

NOTE : Frontier only.

FUNCTIONALITY TEST PROCEDURE:

Turn ignition switch ON.

Turn headlamp and fog lamp switches ON.

Verify headlamps and fog lamps are illuminated.

4) Perform fog-light and head-light aiming check.

Turn headlamp switch OFF (leaving fog lamp switch ON).

Verify both headlamp and fog lamps turn off.

Verify turn signal and high beam functionality.

RH/LH - Install trim ring.

Refer to Service Manual for Aiming

Adjustment.

12)

RH/LH - Install inner fender.

NOTE: Step not necessary for most Frontier

models.

Pathfinder and Xterra

Fig 16

Frontier (with Steel Bumper)

Fig 17

Page 7 of 7 999F1 XV000II 07/12/2011

Nissan 999F1-KV000 User manual

Nissan 999F1-KV000 User manual

Nissan 999F1-KV000 User manual

Related papers

Other documents