Quick Start Guide
ConnectCore™
9M/Wi-9M 2443
Multimedia Application Kit
© Digi International, Inc., 2009
Digi, Digi International, ConnectCore and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.
2 Connect hardware to development board
a
Connect the Audio/CF Add-on board to the development board using the dual
in-line connectors
1 Unpack and verify contents
Verify that your kit contains these components:
A
udio/CF Add-on board
T
his Quick Start Guide
ConnectCore™
9M/Wi-9M 2443
Multimedia Application Kit
Signal Rail 2
Audio/CF Add-on board
Flat ribbon
20-pin cable
Camera board
b
C
onnect the camera to connector X28 on the development board using the flat
r
ibbon 20-pin cable
Note: Pin 1 marked by a triangle on the boards
[X28]
Signal Rail 1
[X28]
3 Download documentation
To obtain a complete bill of material and installation instructions specific to
your platform, go to http://www.digi.com/support
4 What’s next?
Click on “Documentation” link to access available product documentation
a
b
Select "Application Kits," as shown, and
click "Submit"
Click on “ConnectCore™ 9M/Wi-9M 2443 Multimedia Application Kit” link
c
ConnectCore 9M/Wi-9M 2443 Development board
/
