14” Bandsaw w/Open Stand
Owner’s Manual
For more information:
www.rikontools.com or [email protected]
For Parts or Questions:
[email protected] or 877-884-5167
Part #13-321M1
Model: 13-321
Mobile Base for
Note: Mobile Base and Stand Legs for
10-321 Bandsaw are Black in Color.
Mobile Base Assembly
1. On the underside of the movable frame, locate the two
raised areas on either side. Mount the two back castors
and secure in place using the nuts and bolts provided.
Fig.1.
2. Locate the release pedal and install to the movable
frame between the two castors. Fig.2.
Fig.1
RAISED AREAS
Fig.2
RELEASE PEDAL
Key#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Description
Pedal frame
Big washer
Hex. Nut
Spring washer
Movable castor
Shaft
Big washer
Brace support bar
Split pin
Hex. Screw
Castor
Movable frame
Release pedal
Flat washer
Hex. Nut
QTY
1
2
2
2
2
1
4
2
4
5
2
1
1
5
5
List of Loose Parts
Fig.3
Fig.6
PIN & WASHER
Fig.4
Shaft
WASHER
PIN
BRACE SUPPORT BAR
BRACE
SUPPORT
Wheel Kit Assembly Cont.
3. Locate the two front castors, mount and
secure them to the pedal frame. Fig.3.
Next slide a shaft through on one of the front legs
and install a brace support bar. Place a washer on
the shaft and slide a pin throughout the shaft end.
Fig.4.
4. Pass the shaft through the pedal frame and
through the opposing leg. Fig.5.
5. Once the shaft is through the opposing leg install
the remaining brace support bar on the shaft and
secure with a washer and pin (as in previous
Fig.4) Fig.6.
Next pass the remaining shaft through the rear of
the stand and install the brace support bar with
washer and pin (as in previous Fig.4).
6. The movable frame can now be installed to the
shaft and secured to the opposing rear leg with the
other brace support bar, washer and pin. Ensure
movable frame is installed below the movable
pedal frame. Fig.7.
NOTE:
It may be necessary to remove the front
stand brace above foot pedal to operate the
release. Fig.7.
Fig.5
Fig.7
FRONT BRACE
(removed)
For more information:
16 Progress Rd
Billerica, MA 01821
877-884-5167/978-528-5380
www.rikontools.com
Copyright RIKON Power Tools Inc. 2013 Printed in China 1/13
/