Steren CCTV-087 Owner's manual

Page is loading ...

16

Flat screen video doorbell

CCTV-087

Thank You on purchasing your new Steren product.

This manual includes all the feature operations and troubleshooting necessary to

install and operate your new Steren´s Flat screen video doorbell.

Please review this manual thoroughly to ensure proper

installation and operation of this product. For support, shopping,

and everything new at Steren, visit our website:

www.steren.com

The instructions of this manual are for reference about the product.

There may be differences due to updates.

Please check our web site (www.steren.com) to

obtain the latest version of the instruction manual.

17

IMPORTANT

• Clean with a soft, dry cloth.

• Do not use solvents or other chemicals to clean the exterior of the device.

• Avoid dropping the unit as this may cause damage.

• Do not try to open the device, may cause damages and warranty will be void.

• Be careful to not install the wires close to electromagnetic noise sources (electric

engines, electric fence, power supplies) being that may distort the image.

HIGHLIGHTS

Due to the screen and camera with microphone in this video intercom you can watch

the people who rings at your door, then you can talk with them, easily and secure. You

can install an electric door lock* and open the door from the screen control.

The camera has a metallic case and it is water resistant, so you can install it outdoors.

It also has 4 LED lights that automatically turns on in low light conditions.

The 4.3” color screen has touch controls to answer when someone rings, activate the

camera any time, open the door and make some setting changes.

* Electric door lock sold separately

18

CONTENT

Intercom

Camera

Intercom

bracket

Camera bracket

5 pin connector (x 3) 4 pines connector (x 2)

AC adapter

Screws and

anchors

19

PARTS

Camera

1. Lens

2. Night vision LED

3. Speaker

4. Bell button / ID plate

5. Microphone

6. Connection ports

Intercom

1. In-use LED

2. Screen

3. Speaker

4. On / off switch

5. Microphone

6. Power input

7. Connection ports

1

2

3

4

6

1

2 3

45

6

7

20

Control panel

Hang up / Back

Answer

Door

unblock

Navigation +

Navigation -

Settings / Conﬁ rm

Monitoring

21

Door

unblock

Navigation +

1,50m

Select the place to install the intercom. We recommend a wall or solid and ﬁ xed

surface.

INSTALLATION

Intercom

1

2

3 4

22

Camera

The optimal height to install the camera is between 1.40 and 1.70 m, from the camera

center until the ﬂ oor (this is as reference).

Select the place to install the camera. We recommend

a solid surface (into a wall, under a ceiling, roof).

1,40 y 170 cm

1 2

3

Note: The camera obtains energy from

the intercom. While it is connected, the ID

plate always is illuminated.

23

CONNECTION DIAGRAM

Use UTP CAT 5 cable to make the connections (max 50m).

Brown

Note: Make sure to join cables matching

colors

White

24

OPERATION MODES

Visitor call

When a visitor press the bell button, the intercom sounds and in the screen appears

the camera’s view. Also, the ID plate change the intensity of the light.

Note: When the camera detects a closed presence the night vision LED will light.

1. Press can talk with the visitor.

2. Press to open the electric lock.

3. Push to end the communication.

Note: If nobody answers, the intercom back to wait mode.

Monitoring

1. While is in wait mode, press the button to can see into the screen the exterior

image.

2. If you require to open the door, press

3. To activate the camera’s speaker press

4. Push to end the communication.

25

SYSTEM SETTINGS

1. Turn on the monitor and enter to the system settings, in the wait mode press

Use to moving between the options.

2. Press again to conﬁ rm the option that you want edit.

3. Once choose the wanted option, use to change the values then press to

conﬁ rm.

4. If you want exit, press

LANGUAGE Choose any of the 2 languages

(english or spanish)

CHIME TIME Choose the bell duration, 10 to 60s

(30s by default)

CHIME VOLUME 3 levels (low, medium, high)

RING TYPE Choose a tone of the 25 available

DO NOT DISTURB Mute the intercom bell

CAN BE MONITORED If activate this function, the device

can be listened by others monitors

(Not available)

DEVICE ADDRESS You can modify the local name of the

device. ROOM1, ROOM2, ROOM3,

ROOM4 (No available)

26

PORT 2 STATE Consult the device status connected into

the port 2 (Not available)

PORT 3 STATE Consult the device status connected into

the port 3 (Not available)

RESTORE DEFAULT Return to the default values

Image settings

1. In the wait mode press and then to display the volume, brightness,

contrast, color and size screen options.

2. Press to change the options and push to change the values.

TROUBLESHOOTING

No sound and image • Be sure that the device is connec-

ted to a power supply.

• Review the connections in accord

with the diagram.

• Verify the wires status; can be

damaged or cutted.

Image with noise or unclear • Verify the connections; some cable

could disconnected.

• Adjust the brightness and contrast

controls

The door can’t be open • Review the connection of the

electric lock.

•Check that the electric lock it’s

compatible with this device.

27

SPECIFICATIONS

Monitor (main unit)

Input: 15 V - - - 1 A

Consumption: 5W (max.)

Stand-by power consumption: 0.3 W

Output (to camera): 12 V - - -

Operating temperature: 0°C to +40°C

Operating humidity: 0% to 95%

Resolution: 480x272

Video output: 1 Vpp

Camera (external unit)

Input: 12 V - - -

Consumption: 3W

Angle of vision: 110°

Video output: 1Vpp 75 ohms

Resolution: 700 TVL

Operating temperature: -30°C to +60°C

Power converter

Input: 100-240 V~ 50-60 Hz 500 mA

Output: 15 V - - - 1 A

28

Product: Flat screen video doorbell

Part number: CCTV-087

Brand: Steren

WARRANTY

This Steren product is warranted under normal usage against defects in workmanship and ma-

terials to the original purchaser for one year from the date of purchase.

CONDITIONS

1.- This warranty card with all the required information, invoice, product box or package, and

product, must be presented when warranty service is required.

2.- If the product stills on the warranty time, the company will repair it free of charge.

3.- The repairing time will not exceed 30 natural days, from the day the claim was received.

4.- Steren sell parts, components, consumables and accessories to customer, as well as warran-

ty service, at any of the addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leak batteries,

failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe

keeping, among others.

a) The consumer can also claim the warranty service in the purchase establishment.

b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.

RETAILER INFORMATION

Name of the retailer:

Address:

Product:

Brand:

Part number:

Serial number:

Date of delivery:

In case your product fails or have questions, please contact

your nearest dealer. If you are in Mexico, please give a call

to our

Call Center.

01 800 500 9000

Page is loading ...

Steren CCTV-087 Owner's manual

Steren CCTV-087 Owner's manual

in other languages

Related papers

Other documents