Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
16
Flat screen video doorbell
CCTV-087
Thank You on purchasing your new Steren product.
This manual includes all the feature operations and troubleshooting necessary to
install and operate your new Steren´s Flat screen video doorbell.
Please review this manual thoroughly to ensure proper
installation and operation of this product. For support, shopping,
and everything new at Steren, visit our website:
www.steren.com
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our web site (www.steren.com) to
obtain the latest version of the instruction manual.
17
IMPORTANT
• Clean with a soft, dry cloth.
• Do not use solvents or other chemicals to clean the exterior of the device.
• Avoid dropping the unit as this may cause damage.
• Do not try to open the device, may cause damages and warranty will be void.
• Be careful to not install the wires close to electromagnetic noise sources (electric
engines, electric fence, power supplies) being that may distort the image.
HIGHLIGHTS
Due to the screen and camera with microphone in this video intercom you can watch
the people who rings at your door, then you can talk with them, easily and secure. You
can install an electric door lock* and open the door from the screen control.
The camera has a metallic case and it is water resistant, so you can install it outdoors.
It also has 4 LED lights that automatically turns on in low light conditions.
The 4.3” color screen has touch controls to answer when someone rings, activate the
camera any time, open the door and make some setting changes.
* Electric door lock sold separately
18
CONTENT
Intercom
Camera
Intercom
bracket
Camera bracket
5 pin connector (x 3) 4 pines connector (x 2)
AC adapter
Screws and
anchors
19
PARTS
Camera
1. Lens
2. Night vision LED
3. Speaker
4. Bell button / ID plate
5. Microphone
6. Connection ports
Intercom
1. In-use LED
2. Screen
3. Speaker
4. On / off switch
5. Microphone
6. Power input
7. Connection ports
1
2
3
4
6
1
2 3
45
6
7
20
Control panel
Hang up / Back
Answer
Door
unblock
Navigation +
Navigation -
Settings / Confi rm
Monitoring
21
Door
unblock
Navigation +
1,50m
Select the place to install the intercom. We recommend a wall or solid and fi xed
surface.
INSTALLATION
Intercom
1
2
3 4
22
Camera
The optimal height to install the camera is between 1.40 and 1.70 m, from the camera
center until the fl oor (this is as reference).
Select the place to install the camera. We recommend
a solid surface (into a wall, under a ceiling, roof).
1,40 y 170 cm
1 2
3
Note: The camera obtains energy from
the intercom. While it is connected, the ID
plate always is illuminated.
23
CONNECTION DIAGRAM
Use UTP CAT 5 cable to make the connections (max 50m).
Brown
Note: Make sure to join cables matching
colors
White
White
24
OPERATION MODES
Visitor call
When a visitor press the bell button, the intercom sounds and in the screen appears
the camera’s view. Also, the ID plate change the intensity of the light.
Note: When the camera detects a closed presence the night vision LED will light.
1. Press can talk with the visitor.
2. Press to open the electric lock.
3. Push to end the communication.
Note: If nobody answers, the intercom back to wait mode.
Monitoring
1. While is in wait mode, press the button to can see into the screen the exterior
image.
2. If you require to open the door, press
3. To activate the camera’s speaker press
4. Push to end the communication.
25
SYSTEM SETTINGS
1. Turn on the monitor and enter to the system settings, in the wait mode press
Use to moving between the options.
2. Press again to confi rm the option that you want edit.
3. Once choose the wanted option, use to change the values then press to
confi rm.
4. If you want exit, press
LANGUAGE Choose any of the 2 languages
(english or spanish)
CHIME TIME Choose the bell duration, 10 to 60s
(30s by default)
CHIME VOLUME 3 levels (low, medium, high)
RING TYPE Choose a tone of the 25 available
DO NOT DISTURB Mute the intercom bell
CAN BE MONITORED If activate this function, the device
can be listened by others monitors
(Not available)
DEVICE ADDRESS You can modify the local name of the
device. ROOM1, ROOM2, ROOM3,
ROOM4 (No available)
26
PORT 2 STATE Consult the device status connected into
the port 2 (Not available)
PORT 3 STATE Consult the device status connected into
the port 3 (Not available)
RESTORE DEFAULT Return to the default values
Image settings
1. In the wait mode press and then to display the volume, brightness,
contrast, color and size screen options.
2. Press to change the options and push to change the values.
TROUBLESHOOTING
No sound and image • Be sure that the device is connec-
ted to a power supply.
• Review the connections in accord
with the diagram.
• Verify the wires status; can be
damaged or cutted.
Image with noise or unclear • Verify the connections; some cable
could disconnected.
• Adjust the brightness and contrast
controls
The door can’t be open • Review the connection of the
electric lock.
•Check that the electric lock it’s
compatible with this device.
27
SPECIFICATIONS
Monitor (main unit)
Input: 15 V - - - 1 A
Consumption: 5W (max.)
Stand-by power consumption: 0.3 W
Output (to camera): 12 V - - -
Operating temperature: 0°C to +40°C
Operating humidity: 0% to 95%
Resolution: 480x272
Video output: 1 Vpp
Camera (external unit)
Input: 12 V - - -
Consumption: 3W
Angle of vision: 110°
Video output: 1Vpp 75 ohms
Resolution: 700 TVL
Operating temperature: -30°C to +60°C
Power converter
Input: 100-240 V~ 50-60 Hz 500 mA
Output: 15 V - - - 1 A
28
Product: Flat screen video doorbell
Part number: CCTV-087
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and ma-
terials to the original purchaser for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice, product box or package, and
product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warran-
ty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leak batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe
keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer:
Address:
Product:
Brand:
Part number:
Serial number:
Date of delivery:
In case your product fails or have questions, please contact
your nearest dealer. If you are in Mexico, please give a call
to our
Call Center.
01 800 500 9000
Page is loading ...
/
