Panasonic SCHT700EB Owner's manual

Panasonic
Brand
Panasonic
Model
SCHT700EB
Category
DVD players
Type
Owner's manual
R
RQT6756-2B
EB
EE GN
Region number supported by
this player
Region numbers are allocated to DVD players and
software according to where they are sold.
For the United Kingdom
≥The region number of this player is “2”.
≥The player will play DVD-Video marked with
labels containing “2” or “ALL”.
Example:
For Australia and N.Z.
≥The region number of this player is “4”.
≥The player will play DVD-Video marked with
labels containing “4” or “ALL”.
Example:
For Russia
≥The region number of this player is “5”.
≥The player will play DVD-Video marked with
labels containing “5” or “ALL”.
Example:
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
[Note]
“EB” on the packaging indicates the United
Kingdom.
2
ALL
3
5
2
4
ALL
4
6
2
5
ALL
4
5
2
DVD Home Theater Sound System
Operating Instructions
Model No. SC-HT900/SC-HT700
AV SYSTEM
TV/AV
DISC
PAGE
GROUP
SEQUENTIAL
REPEAT
PLAY MODE
FL DISPLAY
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFER
LEVEL
SLEEP
C.S.M
ZOOM
AUDIO
AV AFFECT
P.MEMORY
S.POSITION
SFC
C.FOCUS
S.SRND
MIX 2CH
PL
TEST
CH SELECT
DR COMP
QUICK REPLAY
DELAY TIME
SUBTITLE
RETURN
TV VOL
s
TV VOL
r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
123
456
78
0
9
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING
DIGITAL
AUX
S
10/-/--
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5
DISC 3
PHONES
PROGRESSIVE
DISC EXCHANGE
SELECTOR
DISC SKIP
DIGITAL IN
DOWN
VOLUME
UP
OPEN/CLOSE
C.S.M
DISCV.R.S M.R.S
12345
TUNE MODETUNING FM MODE MEMORY
Í
/
I
The illustration shows SC-HT900 for the United Kingdom and Russia.
A
U
D
I
O
/
V
I
D
E
O
2
RQT6756
Getting started
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
[HT900] : indicates features applicable to SC-HT900 only.
[HT700] : SC-HT700 only.
≥These operating instructions are applicable to models
SC-HT900 and SC-HT700 for a variety regions.
≥Unless otherwise indicated, illustrations in these
operating instructions are of SC-HT900 for the United
Kingdom and Russia.
≥Operations in these instructions are described mainly
with the remote control, but you can do the operations on
the main unit if the controls are the same.
System SC-HT900 SC-HT700
Main unit SA-HT900 SA-HT700
Front speakers SB-FS900 SB-FS700
Center speaker SB-PC701 SB-PC700
Surround speakers SB-FS900 SB-FS801A
Active subwoofer SB-WA340 SB-WA330
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
CAUTION!
≥
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
≥DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
≥DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile
telephone.
(Inside of product)
(Back of product)
CLASS 1
LASER PRODUCT
3
RQT6756
Getting started
Accessories
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking
for replacement parts.
∏ 1 Remote control
[HT900]
(EUR7623X80)
[HT700]
(EUR7623X90)
∏ 2 Batteries
for remote control
∏ 1 AC mains lead
[For\the\United\Kingdom]
(RJA0053-3X)
[For\Australia\and\N.Z.]
(RJA0035-2X)
[For\Russia]
(RJA0019-2X)
∏ 1 System cable
(K1HA25HA0001)
∏ [For\the\United\Kingdom\only]
1 Antenna plug adaptor
(K1YZ02000013)
∏ 1 Video cable
(RJL1P016B15A)
∏ 1 AM loop antenna
(N1DADYY00002)
∏ 1 FM indoor antenna
[For\the\United\Kingdom]and\Russia]
(RSA0007-J)
[For\Australia\and\N.Z.]
(RSA0006-J)
∏ 5 Speaker cables
(RFA2163-J)
3k4-m cables
2k10-m cables
∏ 1 Sheet of speaker-cable
stickers
[HT900]
∏ 8 Silver screws
(XSN5r16FN)
[HT900]
∏ 4 Black screws
(XTB3r10JFZ)
[HT900]
∏ 4Clips
(QWBG002AA)
[Note]
The included AC mains lead is for use with this unit only. Do not use
it with other equipment.
[For\the\United\Kingdom]and\Republic\of\Ireland\
www.panasonic.co.uk (for UK customers only)
≥ Order accessory and consumable items for your
product with ease and confidence by telephoning our
Customer Care Centre Mon–Friday 9:00am–5:30pm.
(Excluding public holidays.)
≥ Or go on line through our Internet Accessory ordering
application.
≥ Most major credit and debit cards accepted.
≥ All enquiries transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
≥ It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for
Panasonic PC software related products only.
For Republic of Ireland, please use the Customer Care
Centre number listed above for all enquiries.
For all other product related enquiries, please use the
Customer Care Centre numbers listed above.
Table of contents
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Caution for AC Mains Lead . . . . . . . . . . . . . . . . . . . . . . . 4
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . 13
Discs—Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Sequential play/Changing the disc in the play position . . . . . . . 15
Changing other discs during play . . . . . . . . . . . . . . . . . . . . . . . 15
Position Memory function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Replaying a scene—QUICK REPLAY. . . . . . . . . . . . . . . . . . . . 15
Starting play from a selected item. . . . . . . . . . . . . . . . . . . . . . . 16
Selecting still pictures—Page Skip . . . . . . . . . . . . . . . . . . . . . . 16
Skipping items/Fast forward and rewind—SEARCH. . . . . . . . . 16
Slow-motion play/Frame-by-frame viewing . . . . . . . . . . . . . . . . 16
Discs—Convenient functions . . . . . . . . . . . . . . . . . . . . 17
Selecting groups to play/Repeat play/A-B repeat play . . . . . . . 17
Soundtracks/Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
All group play/Program play/Random play . . . . . . . . . . . . . . . . 19
Marking places to play again/Variable Zoom function. . . . . . . . 20
Playing the programs or play lists on DVD-RAM. . . . . 21
Selecting a program to play—DIRECT NAVIGATOR . . . . . . . . 21
Using the play list menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
WMA/MP3, CD text and JPEG navigation menus . . . . 22
Playing HighMAT discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using GUI (Graphical User Interface) screens . . . . . . . 24
Common procedures/Progress indicator. . . . . . . . . . . . . . . . . . 24
Disc information/Unit information . . . . . . . . . . . . . . . . . . . . . . . 25
The radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Manual tuning/Preset tuning/RDS broadcasting . . . . . . . . . . . . 27
Sound field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Dolby Digital and DTS/Dolby Pro Logic or Dolby Pro Logic II. . 28
Speaker level adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Super Surround/Sound Field Control/Center Focus . . . . . . . . . 29
Multi Rear Surround (M.R.S)/Virtual Rear Surround (V.R.S) . . 29
Seat Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Custom Sound Memory—Store the sound settings . . . . . . . . . 30
Changing the delay time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Sound quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Adjusting the bass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Double re-master—Enjoying more natural sound . . . . . . . . . . . 31
DR COMP—Dynamic range compression . . . . . . . . . . . . . . . . 31
Convenient functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Muting the volume/Dimming the display . . . . . . . . . . . . . . . . . . 32
The sleep timer/Using headphones. . . . . . . . . . . . . . . . . . . . . . 32
Changing settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Optional antenna connections . . . . . . . . . . . . . . . . . . . 35
Operating other equipment . . . . . . . . . . . . . . . . . . . . . . 36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Getting started
Simple setup
STEP1
[HT900] Assembly and connection of front
and surround speakers . . . . . . . . . . .6
Locating. . . . . . . . . . . . . . . . . . . . . . . .7
[HT700] Locating. . . . . . . . . . . . . . . . . . . . . . . .7
STEP2
[HT900] Connecting speakers with the
subwoofer . . . . . . . . . . . . . . . . . . . . . .8
[HT700] Connecting speakers with the
subwoofer . . . . . . . . . . . . . . . . . . . . . .8
STEP3
Television . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
STEP4
Connecting the subwoofer, antennas, and
AC mains lead . . . . . . . . . . . . . . . . . . . . . . .10
STEP5
The remote control. . . . . . . . . . . . . . . . . . . .10
Other speaker setup options . . . . . . . . . . . . . . . . . .11
STEP6
QUICK SETUP. . . . . . . . . . . . . . . . . . . . . . . .12
Disc operations
Radio operations
Sound field/sound quality operations
Other functions
Reference
4
RQT6756
Getting started
Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or
coloured Black or Blue.
The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or
coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL Ó OR
COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse
cover.
CAUTION!
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET OUTLET IN
YOUR HOME THEN THE FUSE SHOULD BE
REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13-AMPERE SOCKET.
Fuse cover
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A
Figure B
5
RQT6756
Getting started
Disc information
∫ Discs that can be played
≥Use discs with the above logos and that conform to specifications.
The unit cannot play other discs correctly.
≥Do not use irregularly shaped discs (e.g. heart-shaped), as these
can damage the unit.
∫ Discs that cannot be played
DVD-ROM, CD-ROM, CDV, CD-G, iRW, DVD-RW, CVD, SACD,
Divx Video Discs, Photo CD and “Chaoji VCD” available on the
market including CVD, DVCD and SVCD that do not conform to
IEC62107.
∫ Disc structure
Disc structure and the labels given to the items on discs depend on
the disc type.
Track: the smallest division on DVD-Audio, CDs and Video CDs,
or a single WMA/MP3 file.
Chapter: the smallest division on DVD-Video.
Group: collections of tracks on DVD-Audio and equivalent to
folders or albums on data discs.
Title:
the largest division on DVD-Video, usually an entire movie.
Program: the division on DVD-RAM equivalent to a single
recording.
Picture: a single JPEG file.
Play list: the largest grouping on a HighMAT disc, or a group of
scenes on DVD-RAM.
Scene: DVD-RAM program sections specified and grouped into
play lists on a DVD video recorder.
Content: covers tracks and pictures on HighMAT discs.
∫ DVD-RAM discs
DVD-RAM discs must meet the following conditions for this unit to be
able to play them.
≥Remove TYPE 2 and 4 discs from their cartridges before use, then
return them when you are finished. Read the instructions for the
disc carefully.
≥Do not allow the disc to become dirty or scratched. Store discs in
their cartridges and ensure the disc label and cartridge label face
the same way.
≥Some parts of the disc, for example where one program ends and
another begins, may not play smoothly.
∫ DVD-R discs
Panasonic DVD-R recorded and finalized on a Panasonic DVD video
recorder are played as DVD-Video on this unit.
∫ CD-R and CD-RW discs
This unit can play CD-R/RW (audio recording disc) recorded with
CD-DA, video CD, SVCD (conforming to IEC62107), WMA, MP3 or
JPEG. Close the sessions or finalize the disc after recording.
∫ HighMAT discs
This unit is compatible with HighMAT discs containing WMA, MP3,
and/or JPEG files.
[Note]
It may not be possible to play CD-R, CD-RW, DVD-R and DVD-RAM
in all cases due to the type of disc or condition of the recording.
∫ Video systems
This unit can play both the PAL and NTSC for video systems. To
view PAL or NTSC, however, your television must match the system
used on the disc.
PAL discs cannot be correctly viewed on an NTSC television. NTSC
can be correctly viewed on a PAL television by converting the video
signal to PAL 60 (➡ page 33, Video—NTSC Disc Output).
∫ To clean discs
DVD-Audio, DVD-Video, Video CD, CD
Wipe with a damp cloth and then wipe dry.
DVD-RAM, DVD-R
≥Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1,
where available).
≥Never use cloths or cleaners for CDs etc.
∫ Handling precautions
≥Do not write on the label side with a ball-point pen or other writing
instrument.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off stickers.)
≥Do not use scratch-proof protectors or covers.
≥Do not use discs printed with label printers available on the market.
Disc type Logo Indication used
in instructions
DVD-RAM [RAM]
DVD-Audio [DVD-A]
DVD-Video [DVD-V]
DVD-R
Video CD [VCD]
Including SVCD
(Confirming to
IEC62107)
CD [CD]
Including CD text
CD-R/RW — [WMA] [MP3]
[JPEG]
Playing DVDs and Video CDs
The producer of these discs can control how they are played so
you may not always be able to control play as described in these
operating instructions (for example if the play time is not
displayed or if a Video CD has menus). Read the disc’s
instructions carefully.
Ty p e ≥Non-cartridge discs
≥Discs that can be removed from their
cartridges (TYPE 2 and 4)
Capacity ≥12 cm 9.4 GB (double-sided) and 4.7 GB
(single-sided)
≥8 cm 2.8 GB (double-sided)
Recording
format
Discs recorded with DVD video recorders, DVD
video cameras, personal computers, etc., using
Version 1.1 of the Video Recording Format (a
unified video recording standard).
6
RQT6756
Simple setup
Simple setup
Assembly and connection of front and surround speakers
≥You can attach the speakers directly to their bases (if you want to put them on shelves, for example).
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i) terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
STEP1
[HT900]
2
3
4
31
2
5
8
7
_:
`:
4
_:
`:
6
15
4 Speaker units
4 Stands
4 Bases
Speaker cables
≥2k4-m cables
≥2k10-m cables
Fit into
groove.
Place into groove.
Position wire
in grooves as
necessary
avoiding
knots.
Fit into groove. Place into groove.
Confirm screw
is securely
fastened.
Confirm screw
is securely
fastened.
Approx.
120 mm
8 Silver screws
Copper
Silver
Assembled
Copper
Silver
7
RQT6756
Simple setup
Locating
≥The front and surround speakers are the same. Use those you
have connected the short cords to as front speakers and those
you have connected the long cords to as surround speakers.
Locating
≥Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are
approximate.
≥Use only supplied speakers
Using other speakers can damage the unit and sound quality will
be negatively affected.
≥Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from
falling if you cannot set them up on an even surface.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field. Note the following points.
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result
in excessive bass. Cover walls and windows with thick curtain.
Main unit
Keep your speakers at least 10 mm away from the system for
proper ventilation.
Center speaker
≥You can also put this speaker directly under the television.
≥Vibration caused by the center speaker can disrupt the picture if it
is placed directly on the television. Put the center speaker on a
rack or shelf.
Subwoofer
Place to the right of the television, on the floor or a sturdy shelf so
that it won’t cause vibration.
Leave 10 cm on the right for the woofer to be effective. Leave
10 cm at the rear for ventilation.
Caution
Hold the speakers by the sides.
Applying pressure to the front net
can damage the speaker.
STEP1
[HT700]
1
FRONT
(L)
2
FRONT
(R)
3
SURROUND
(L)
4
SURROUND
(R)
1
FRONT
(L)
2
FRONT
(R)
3
SURROUND
(L)
4
SURROUND
(R)
5
CENTER
5
CENTER
6
SUBWOOFER
6
SUBWOOFER
Setup exampleSetup example
Main unit
Main unit
8
RQT6756
Simple setup
Connecting speakers with the subwoofer
Attach the speaker-cable stickers to make connection easier.
∫ Preventing the speakers from falling over
Connecting speakers with the subwoofer
Attach the speaker-cable stickers to make connection easier.
STEP2
[HT900]
1
2
3
4
5
SUBWOOFER
5 CENTER
_:
`:
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
1 FRONT (L)
Sheet of
speaker-cable
stickers
Click!
Copper
Silver
4-m cable
4 Black
screws
4 Clips
Screw (not included)
String (not included)
Approx. 150 mm
Clip
Screw
[Note]
Consult a qualified building contractor when attaching the speakers to wall.
Improper attachment may result in damage to the wall and speakers.
STEP2
[HT700]
1 FRONT (L)
_:
`:
1
2
3
4
5
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
5 CENTER
SUBWOOFER
Click!
Copper
Silver
Speaker cables
≥3k4-m cables
≥2k10-m cables
Sheet of
speaker-cable
stickers
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i)
terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
[HT900] [HT700]
Keeping the cables out of the way
Pass the cables through the holes in the stand to
keep them out of the way.
Stand
1 Pass the cable
through the hole.
2 Pass through the
cutout in the base.
9
RQT6756
Simple setup
∫
Connecting a television with a VIDEO IN terminal
Connect directly to your television.
Do not connect the unit through a video cassette recorder, because
the picture may not be played correctly due to the copy guard.
∫ Connecting a television with COMPONENT
VIDEO IN terminals
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B/PR) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same color.
[For\the\United\Kingdom\and\Russia]
≥When making this connection, set “Video Out (AV/Component)”
to “Video/Y PB PR” or “S-Video/Y PB PR” from QUICK SETUP
(➡ page 12).
∫
Connecting a television with an S-VIDEO IN terminal
S-VIDEO OUT terminal
The S video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance
(Y) signals. (Actual results depend on the television.)
[For\the\United\Kingdom\and\Russia]
∫ Connecting a television with SCART terminal
SCART (AV) terminal
To improve picture quality, you can change the video signal output
from the SCART (AV) terminal from “Video” to either “S-Video” or
“RGB” to suit the type of television you are using. Set “Video Out
(AV/Component)” to “S-Video/Y PB PR” or “RGB/No Output” from
QUICK SETUP (➡ page 12).
To enjoy progressive video
≥Connect to the component video (480P) input terminals on a
television compatible with this unit’s copy guard system.
(Video will not be displayed correctly if connected to an
incompatible television.)
≥When playing NTSC discs, change video output mode to
“480P” (➡ page 26).
≥Press [PROGRESSIVE] on the main unit so “PROG.” appears
on the display (➡ page 14).
≥All televisions manufactured by Panasonic and that have 480P
input connectors are compatible. Consult the manufacturer if
you have another brand of television.
STEP3
Television
TV
AUDIO
IN
VCR
AUDIO
IN
AUX
LINE
OUT
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
P
B
P
R
Y
OPTICAL
IN
AM ANTFM ANT
EXTLOOP75
h
L
R
A
VIDEO
IN
Television
(not included)
Video cable (included)
TV
AUDIO
IN
VCR
AUDIO
IN
AUX
LINE
OUT
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
P
B
P
R
Y
OPTICAL
IN
AM ANTFM ANT
EXTLOOP75
h
L
R
A
COMPONENT
VIDEO IN
Y
P
B
P
R
Video cables (not included)
Video cable
TV
AUDIO
IN
VCR
AUDIO
IN
AUX
LINE
OUT
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
P
B
P
R
Y
OPTICAL
IN
AM ANTFM ANT
EXTLOOP75
h
L
R
A
S-VIDEO
IN
S-video cable (not included)
AUX
LINE
OUT
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
P
B
P
R
Y
L
R
AV
AV
21-pin SCART cable (not included)
10
RQT6756
Simple setup
Do not;
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
∫ Use
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m directly in front of the unit.
STEP4
Connecting the subwoofer, antennas, and AC mains lead
TV
AUDIO
IN
VCR
AUDIO
IN
AUX
LINE
OUT
S-VIDEO
OUT
VIDEO
OUT
OPTICAL
IN
AM ANTFM ANT
EXTLOOP75
h
L
R
A
1
L
3
L
2
R
4
5
R
A
1
2
AM ANTFM ANT
EXTLOOP75
h
GND
System cable
AM loop
antenna
FM indoor antenna AC mains lead
Subwoofer
Adhesive tape
Fix the other end of the antenna
where reception is best.
AM loop antenna
Click!
Stand the antenna up
on its base.
Keep loose antenna
cord away from other
wires and cords.
System cable
Catch to the right
To household
mains socket
FM indoor antenna
Catch up
To disconnect
Press the catch
and pull out.
Connect the AC mains lead after all
other connections are complete.
To disconnect
Press the catch
and pull out.
[For\the\United\Kingdom] [For\Australia\and\N.Z.] [For\Russia]
AC mains lead
Conserving power
The unit consumes power (approx. 0.7 W) even when it is turned
off with [Í]. To save power when the unit is not to be used for a
long time, unplug it from the household mains socket.
Remember to reset the radio stations and any other memory
items before using the unit again.
Information you enter into the unit’s memory remains intact for up
to 2 weeks after the AC mains lead is disconnected.
[For\the\United\Kingdom]
\and\Russia]
[For\Australia\and\N.Z.]
[For\the\United\Kingdom\only]
BE SURE TO READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 4 BEFORE
CONNECTION.
[For\Australia\and\N.Z.]
STEP
5
The remote control
R6/LR6, AA, UM-3
1
2
3
3
+
-
+
-
Remote control
Batteries
≥Insert so the poles (i and
j) match those in the
remote control.
≥Do not use rechargeable
type batteries.
11
RQT6756
Simple setup
[HT900] (Center speaker only) / [HT700]
[Note]
The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 kg per screw.
1 Remove the stand.
BEFORE REMOVING THE STAND
≥Take the speaker cable out of the stand’s hole if it is
threaded through.
≥Lay the speaker on a soft cloth.
Unscrew the screw with a Phillips-head screwdriver.
2 Screw a screw (not included) into the
wall.
3 Fit the speaker securely onto the
screw with the hole or holes.
[HT900] (Center speaker only) / [HT700]
Preparation
Remove the stand (➡ step 1 above).
Ensure the stands meet these conditions before purchasing them.
≥Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high
position.
Notes on speaker use
≥You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage.
–When playing distorted sound.
–When the speakers are receiving howling from a record player,
noise from FM broadcasts, or continuous signals from an
oscillator, test disc, or electronic instrument.
–When adjusting the sound quality.
–When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and setup
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
Other speaker setup options
Attaching to a wall
Stand
30–35 mm
Wall
‰7.5–9.4 mm
8–11 mm
Vertical Horizontal
100 mm
Fitting speaker stands (optional)
5 mm, pitch 0.8 mm
60 mm
Speaker stand
(not included)
Attach the stands
with these holes.
Plate thickness plus 7
to 10 mm
Caution
≥Use the speakers only with the recommended
system. Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in the
risk of fire. Consult a qualified service person if
damage has occurred or if you experience a sudden
change in performance.
≥Do not attempt to attach these speakers to walls
using methods other than those described in this
manual.
12
RQT6756
Simple setup
The QUICK SETUP screen appears when you press [SHIFT]i
[SETUP] the first time after purchase and assists you to make
necessary settings. You can access this screen again later if you
need to (➡ page 33, Others—QUICK SETUP).
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
1 Press [Í] to turn on the unit.
2 Press [DVD/CD] to select “DVD/CD”
as the source.
3 Press [SHIFT]i[SETUP] to show the
QUICK SETUP screen.
4 Press [3, 4, 2, 1] to select the
menu language and press [ENTER].
5 Press [3, 4] to select “Yes” to
continue and press [ENTER].
6 Press [3, 4, 2, 1] to select the item
and press [ENTER].
≥Audio Language (➡ page 33)
≥Subtitle Language (➡ page 33)
≥TV Type (➡ below)
≥TV Aspect (➡ below)
[For\the\United\Kingdom\and\Russia]
≥Video Out (AV/Component) (➡ page 33)
7 Press [ENTER] and then [SHIFT]i
[SETUP] to end the settings.
To return to the previous screen
Press [RETURN].
∫ TV Type
Select to suit the type of television.
≥Standard (Direct View TV) (factory preset)
≥CRT Projector
≥LCD TV/Projector
≥Projection TV
≥Plasma TV
∫ TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your
television.
If you have a regular 4:3 television, you can also select how video
on some discs is shown (➡ page 33, Video—TV Aspect).
≥4:3 Pan&Scan (factory preset)
Widescreen software is expanded to fill the
screen of a 4:3 aspect television (unless
prohibited by the producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the
letterbox style on a 4:3 aspect television.
STEP6
QUICK SETUP
AV SYSTEM
TV/AV
DISC
PAGE
GROUP
SEQUENTIAL
REPEAT
PLAY MODE
FL DISPLAY
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFER
LEVEL
SLEEP
C.S.M
ZOOM
AUDIO
AV EFFECT
P.MEMORY
S.POSITION
SFC
C.FOCUS
S.SRND
MIX 2CH
PL
TEST
CH SELECT
DR COMP
QUICK REPLAY
DELAY TIME
SUBTITLE
RETURN
TV VOL
s
TV VOL
r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
123
456
78
0
9
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING
DIGITAL
AUX
S
10/-/--
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5
DISC 3
1
2
3, 7
4–7
RETURN
3, 7
SELECT
SETUP
QUICK SETUP
Select the menu language.
ENTER RETURN
English
Français
Español
Deutsch
Italiano
Português
Svenska
Nederlands
13
RQT6756
Getting started
Control reference guide
1 Standby/on switch [Í] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 TV/AV button [TV/AV] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3 Disc select button [DISC], Disc buttons [DISC1]–[DISC5] . . 14
4 Group, Page button [GROUP, PAGE]. . . . . . . . . . . . . . . . 16, 17
5 Sequential button [SEQUENTIAL]. . . . . . . . . . . . . . . . . . . . . 15
6 Cancel, FL display button [CANCEL, FL DISPLAY] . . . . 19, 32
7
Play mode, Repeat button [PLAY MODE, REPEAT]
. . . . . 17, 19
8 Skip, Preset channel, TV channel button
[: 9, SKIP, X CH W] . . . . . . . . . . . . . . . . . . . . . 16, 27, 36
9 Basic operation buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
: Top menu, Direct navigator button
[TOP MENU, DIRECT NAVIGATOR] . . . . . . . . . . . . . . . . . 14, 21
; Cursor buttons [3, 4, 2, 1], Enter button [ENTER] . . . . . 12
<
Display, TV volume down button [DISPLAY, TV VOL
s
]
. . 24, 36
= Volume buttons [s, r, VOLUME]. . . . . . . . . . . . . . . . . . . . . . 14
> Sound field, sound quality buttons. . . . . . . . . . . . . . . . . 28–31
[HT900]
Dolby Pro Logic
II
button [
ÎPLII
]
[HT700] Dolby Pro Logic button [ÎPL]
?
Custom sound memory, Sleep button [C.S.M, SLEEP]
. . 30, 32
@ [HT900] Position memory, AV effect button
[P.MEMORY, AV EFFECT] . . . . . . . . . . . . . . . . . . . . . . . . . 15, 29
[HT700] Position memory button [POSITION MEMORY] . . . . 15
A Shift button [SHIFT]
To use functions labeled in orange:
While pressing [SHIFT], press the corresponding button.
B Channel select, Test button [CH SELECT, TEST] . . . . . 28, 29
C AV system standby/on button [Í, AV SYSTEM] . . . . . . . . . 36
D Source select buttons
Face towards this unit to change the source.
Press [TV] or [VCR] first to operate a Panasonic television or
video cassette recorder (➡ pages 36, 37).
[HT900] AUX, DIGITAL input button [AUX, DIGITAL]
[HT700] AUX button [AUX]
E Numbered buttons [1–9, 0, S10/-/--] . . . . . . . . . . . . . . . . . . . 16
F Slow/search, Tuning buttons
[6, 5 SLOW/SEARCH] . . . . . . . . . . . . . . . . . . . . . . . 16, 27
G Menu, Play list button [MENU, PLAY LIST]. . . . . . . . . . . 14, 21
H Return, TV volume up button [RETURN, TV VOLr] . . . 12, 36
I Muting, Setup button [MUTING, SETUP] . . . . . . . . . . . . 12, 32
J Audio, Zoom button [AUDIO, ZOOM] . . . . . . . . . . . . . . . 18, 20
K [HT900] Subtitle, Delay time button
[SUBTITLE, DELAY TIME] . . . . . . . . . . . . . . . . . . . . . . . . 18, 30
[HT700] Subtitle button [SUBTITLE] . . . . . . . . . . . . . . . . . . . . 18
L [HT900]
Quick replay, Dynamic range compression button
[QUICK REPLAY, DR COMP] . . . . . . . . . . . . . . . . . . . . . . 15, 31
[HT700] Quick replay button [QUICK REPLAY]. . . . . . . . . . . . 15
1 Standby/on switch [Í/I] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of power.
M Standby/on indicator
When the unit is connected to the AC mains supply, this indicator
lights up in standby mode and goes out when the unit is turned on.
N Custom Sound Memory button [C.S.M] . . . . . . . . . . . . . . . . 30
O Skip/search, Tuning buttons
[:/6, 5/9, X TUNING W] . . . . . . . . . . . . . . . . . 16, 27
P Source select button [SELECTOR]
[HT900] DVD/CD>FM>AM>TV>VCR>AUX>DIGITAL IN
[HT700] DVD/CD>FM>AM>TV>VCR>AUX
Q Drawer
R Stop, Tune mode button [∫, TUNE MODE]. . . . . . . . . . . 14, 27
S Pause, FM mode button [;, FM MODE] . . . . . . . . . . . . . 14, 27
T Play, Memory button [1, MEMORY] . . . . . . . . . . . . . . . . 14, 27
U Volume control [VOLUME, DOWN, UP] . . . . . . . . . . . . . . . . . 14
V Drawer open/close button [<, OPEN/CLOSE] . . . . . . . . . . . 14
W Headphone jack [PHONES] . . . . . . . . . . . . . . . . . . . . . . . . . . 32
X [HT900] DIGITAL IN button [DIGITAL IN] . . . . . . . . . . . . . . . . . 37
Y Progressive out button [PROGRESSIVE] . . . . . . . . . . . . . . . 14
Z [HT900] Multi rear surround, Virtual rear surround indicators
[M.R.S, V.R.S] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
[ Display
\ Remote control signal sensor
] Disc indicators [DISC 1–5] . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
^ Disc exchange button [DISC EXCHANGE] . . . . . . . . . . . . . . 15
_ Disc skip button [DISC SKIP] . . . . . . . . . . . . . . . . . . . . . . . . 15
` AC supply indicator [AC IN]
This indicator lights when the unit is connected to the AC mains
supply.
PHONES
Í
/
I
PROGRESSIVE
DISC EXCHANGE
SELECTOR
DISC SKIP
DIGITAL IN
DOWN
VOLUME
UP
OPEN/CLOSE
C.S.M
DISCV.R.S M.R.S
1234 5
TUNE MODETUNING FM MODE MEMORY
W Z]
O
1
^
_\
V
UTSRNM PQ
X
Y
[
5
4
5
4
`
AV SYSTEM
TV/AV
DISC
PAGE
GROUP
SEQUENTIAL
REPEAT
PLAY MODE
FL DISPLAY
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFER
LEVEL
SLEEP
C.S.M
ZOOM
AUDIO
AV EFFECT
P.MEMORY
S.POSITION
SFC
C.FOCUS
S.SRND
MIX 2CH
PL
TEST
CH SELECT
DR COMP
QUICK REPLAY
DELAY TIME
SUBTITLE
RETURN
TV VOL
s
TV VOL
r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING
DIGITAL
AUX
S
10/-/--
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5
DISC 3
1
2
3
4
6
7
8
9
:
;
<
=
>
?
L
A
B
C
D
E
F
G
K
H
5
@
J
I
456
123
78
0
9
Disc tray number
Remote control
Main unit
Subwoofer
14
RQT6756
Disc operations
Discs—Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Preparation
≥Press [Í] to turn on the unit.
≥Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
[1] Press [DVD/CD] to select “DVD/CD” as
the source.
[2] Press [<] to open the drawer and
place the disc(s) on the disc tray(s).
To load discs on the other trays, press [DISC SKIP] on the
main unit.
If the disc contains both audio data (WMA and MP3) and
JPEG, check “Mixed Disc—Audio & Stills” setting in the
SETUP menu (➡ page 33). Select “Stills (JPEG)” or “Audio
(MP3/WMA)”.
≥Remove TYPE 2 and 4 discs
from their cartridges before use.
[RAM]
≥Label-up (With double-sided
discs, load so the label for the
side you want to play is facing
up.)
[3] Press [<] to close the drawer.
The disc indicator lights red to show the disc in the play
position is selected.
[4] Press [1] (play).
Play begins.
[WMA] [MP3] [CD] (CD text only)
Group and track names are displayed on the television.
≥Press [SUBTITLE] to turn the display on or off.
≥You can also use the navigation menus to control play
(➡ page 22).
[5] Adjust the volume.
(Minimum) (Maximum)
∫ To pause play
Press [;] during play.
Press [1] (play) to restart play.
∫ To stop play
Press [∫] (➡ page 15, Resume function).
∫ To select a disc
Press [DISC] and then the disc button ([DISC 1]–[DISC 5]).
∫ To prevent damage
Do not;
≥load more than one disc per tray.
≥touch the drawer or the carousel while they are in motion.
≥rotate the carousel by hand.
≥close the drawer by hand.
[Note]
≥If “$” appears on the television
The operation is prohibited by the unit or disc.
≥It may take some time for play to start but this is normal.
[DVD-A] [DVD-V] [VCD]
Press the numbered buttons to select an
item.
To select a 2-digit number
Example: To select item 23, press [S10] ➡ [2] ➡ [3].
≥When playing DVDs, you can also use [3, 4, 2, 1] to select
items. Press [ENTER] to confirm your selection.
To return to the menu screen
[DVD-A] [DVD-V] [TOP MENU]: Shows the first menu screen.
[DVD-V] [MENU]: Shows the menu screen.
[VCD] [RETURN]: Shows the menu screen.
[Note]
The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [∫] when you finish to preserve the
unit’s motor and your television screen.
To enjoy progressive video
Press [PROGRESSIVE].
The television will be disrupted for a
moment but this is normal.
≥Output from this unit is interlace if you have connected to the
television through the VIDEO OUT, S-VIDEO OUT or SCART
(AV) terminal or playing PAL discs, even if “PROG.” is on the
display.
PROGRESSIVE
DISC EXCHANGE
SELECTOR
DISC SKIP
DOWN
VOLUME
UP
OPEN/CLOSE
S.M
DISC
V.R.S M.R.S
1234 5
TUNE MODETUNING FM MODE MEMORY
DISC SKIP
DISC EXCHANGE
PROGRESSIVE
∫;
@@
,
#$
%
AV SYSTEM
TV/AV
DISC
PAGE
GROUP
SEQUENTIAL
REPEAT
PLAY MODE
FL DISPLAY
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFER
LEVEL
SLEEP
C.S.M
ZOOM
AUDIO
AV EFFECT
P.MEMORY
S.POSITION
SFC
C.FOCUS
S.SRND
MIX 2CH
PL
TEST
CH SELECT
DR COMP
QUICK REPLAY
DELAY TIME
SUBTITLE
RETURN
TV VOL
s
TV VOL
r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING
DIGITAL
AUX
SHIFT
!
$
∫
;
P.MEMORY
SEQUENTIAL
DISC
TOP MENU
QUICK REPLAY
MENU
DISC 1
DISC 5
RETURN
SUBTITLE
342 1
ENTER
Í
%
DISC 1 DISC 2
DISC 4 DISC 5
DISC 3
S
10/-/--
123
456
78
0
9
Numbered
buttons
Disc indicators
PROG
.
When a menu appears on the television
1
5
1
5
Play starts from the disc in
the front-left position.
0 dB
–
– dB
15
RQT6756
Disc operations
[VCD] [CD] [WMA] [MP3]
The unit usually plays the disc in the play position and then stops.
Turn sequential play on to play all loaded discs, except for DVDs and
JPEG discs.
While stopped
Press [SEQUENTIAL].
Each time you press the button:
SEQ on()SEQ off
[Note\
≥HighMAT menus and video CD playback control are disabled.
≥Only audio tracks can be played on HighMAT discs.
≥You cannot change the mode during program or random play.
≥Sequential Mode turns off when you switch the unit to standby.
≥Repeat function does not work when using Sequential Mode.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Main unit only
1 Press [DISC EXCHANGE].
The drawer opens and the disc in the play position comes to
the front-left position.
2 Change the disc in the front-left
position.
3 Press [DISC EXCHANGE].
The drawer closes.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
You can change the other discs without interrupting play.
Main unit only
1 Press [<] to open the drawer.
2 Press [DISC SKIP] to rotate the
carousel.
The carousel moves one tray clockwise and each subsequent
press moves it two trays in alternate directions.
3 Change the disc and press [<] to
close the drawer.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
During play
Press [P.MEMORY] (or [POSITION
MEMORY]) to memorize a position.
Press again to replace the position.
This position is saved even if you turn the unit off, change the source
or change discs. When you turn the unit on, reselect “DVD/CD” or
reinsert the disc whose position you memorized, “RESUME” lights
on the display. Press [1] (play) to start play from the memorized
position. The position is cleared.
≥You can memorize positions on up to five different discs at a time.
When you memorize another position, the earliest position is
replaced.
≥You cannot recall the position in Sequential Mode.
“RESUME” lights on the display when the unit has recorded the
position at which you stopped play.
Press [1] (play) to start play from that position.
≥The position is cleared when you:
—Turn the unit off.
—Select another source or change discs.
≥Press [∫] to clear the position.
[DVD-V]
The following message appears
immediately after you press [1] (play)
when “RESUME” is displayed.
Press [1] (play) while the message is
displayed and the beginning portions of
each chapter up to the current one are
played.
Full play resumes from the point where you pressed [∫] or
[P.MEMORY] (or [POSITION MEMORY]).
(This feature works only within a title.)
If you do not press [1] (play), the message disappears and play
starts from where you pressed [∫] or [P.MEMORY] (or [POSITION
MEMORY]).
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Skip back a few seconds within the current item (program, track or
title).
[JPEG]
Skip back a few pictures.
During play
Press [QUICK REPLAY].
[Note]
This feature may not work while playing some parts of a disc or at all
with some discs.
Sequential play
Changing the disc in the play position
Changing other discs during play
SEQ
Position Memory function
Resume function
Chapter Review
Replaying a scene—QUICK REPLAY
Position memorized
Press PLAY to Chapter Review
16
RQT6756
Disc operations
Discs—Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Press the numbered buttons to select the
item.
Play starts from the selected item.
To select a 2-digit number
Example: To select track 23, press [S10] ➡ [2] ➡ [3].
[WMA] [MP3] [JPEG] [2] ➡ [3] ➡ [ENTER]
[Note\
≥This works only when stopped with some discs.
≥When playing DVD-Audio and you want to start play from a track in
a different group, select the group first (➡ page 17).
[DVD-A]
During play or while paused
Press [SHIFT]i[PAGE].
The page changes each time you press the button.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
During play or while paused
Press [:] or [9].
≥Press [:/6] or [5/9] on the main unit.
[JPEG]
Press [2] or [1] for picture skip, or [3] or
[4] for group skip.
≥Each press increases the number of skips.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
During play
Press [6] or [5].
≥Press and hold [:/6] or [5/9] on the main unit.
≥Audio will be heard during search for most discs. You can turn this
audio off if you want to (➡ page 33, Audio—Audio during Search).
≥[DVD-V] You can slow down or speed up play (➡ page 24).
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
While paused
Press [6] or [5].
≥Press and hold [:/6] or [5/9] on the main unit.
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
While paused
Press [2] or [1].
The frame changes each time you press the button.
≥The frames change in succession if you press and hold the button.
≥Pressing [;] also activates forward frame-by-frame.
Starting play from a selected item
Selecting still pictures—Page Skip
Numbered
buttons
PAGE 1
Skipping items
Fast forward and rewind—SEARCH
Slow-motion play
Frame-by-frame viewing
Notes
≥The speed of search and slow-motion increases up to 5 steps.
≥Press [1] (play) to restart play.
≥You cannot move backwards with Video CD during frame-by-
frame and slow-motion.
When playing Video CDs with playback control
Pressing buttons to perform skip, search or slow-motion may
take you to a menu screen.
Play position Marker
Program/Scene
Program/Scene
Program/Scene
once once twicetwice three times
Example [RAM]
17
RQT6756
Disc operations
Discs—Convenient functions
[DVD-A] [WMA] [MP3] [JPEG]
1 Press [GROUP].
Example [MP3]
2 Press the numbered buttons to select
the group and press [ENTER].
3 Press the numbered buttons to select
the track/picture number and press
[ENTER].
[DVD-A]
Playing all the groups in succession (➡ Page 19, All group play)
Playing bonus groups
Some discs contain bonus groups. If a password screen appears
after selecting a group, enter the password with the numbered
buttons. Refer also to the disc’s jacket.
[RAM] [DVD-A] [DVD-V] [JPEG]
[VCD] [CD] [WMA] [MP3] (There is no on-screen display.)
During play
Press [SHIFT]i[REPEAT].
Each time you press the button:
[RAM]
PG REPEAT
>ALL REPEAT (Entire disc)>REPEAT OFF
≥During play list play
SCENE REPEAT
>PL REPEAT>REPEAT OFF
[DVD-V]
CHAPTER REPEAT
>TITLE REPEAT
§
>REPEAT OFF
[VCD] [CD]
TRACK REPEAT
>ALL REPEAT (Entire disc)>REPEAT OFF
[DVD-A] [WMA] [MP3]
TRACK REPEAT
>GROUP REPEAT
§
>REPEAT OFF
[JPEG]
GROUP REPEAT
>REPEAT OFF
§During all group ([DVD-A]), program and random play
“ALL REPEAT” is displayed.
≥You can also repeat play of content and group on HighMAT discs.
∫ To repeat only your favorite tracks/chapters
Start program play (➡ page 19) and press [SHIFT]i[REPEAT] to
select the repeat mode.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
You can repeat a section between points A and B within a program,
title or track.
1 During play
Press [DISPLAY] until the unit
information screen is displayed
(➡ page 25).
2 Press [3, 4] to select the play menu.
Example [DVD-V]
3
Press [
2
,
1
] to select “A-B Repeat” and
1 Press [ENTER] at the starting point
(A).
2 Press [ENTER] at the finishing
point (B).
A-B repeat starts.
To return to the normal play
Press [ENTER] again.
To clear the menus
Press [RETURN] until the menu disappears.
[Note\
A-B repeat is canceled when you press [QUICK REPLAY].
Selecting groups to play
AV SYSTEM
TV/AV
DISC
PAGE
GROUP
SEQUENTIAL
REPEAT
PLAY MODE
FL DISPLAY
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFER
LEVEL
SLEEP
C.S.M
ZOOM
AUDIO
AV EFFECT
P.MEMORY
S.POSITION
SFC
C.FOCUS
S.SRND
MIX 2CH
PL
TEST
CH SELECT
DR COMP
QUICK REPLAY
DELAY TIME
SUBTITLE
RETURN
TV VOL
s
TV VOL
r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
123
456
78
0
9
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING
DIGITAL
AUX
S
10/-/--
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5
DISC 3
SHIFT
REPEAT
DISPLAY
GROUP
342 1
ENTER
RETURN
Numbered
buttons
2
2
118
Group number
Track number in group
Repeat play
A-B repeat play
AB
OFF
A-B Repeat
A B
AB
18
RQT6756
Disc operations
Discs—Convenient functions
≥“–” or “––” is displayed instead of the language number in
circumstances such as when no language is recorded on the disc.
[VCD] (SVCD only)
Soundtrack and subtitle numbers may change even if corresponding
soundtracks are not recorded.
[RAM] [DVD-A] [DVD-V] [VCD]
(Discs with multiple soundtracks)
During play
Press [AUDIO].
The number changes each time you press the button.
≥You can also use this button to turn the vocals on and off on
karaoke discs. Read the disc’s instructions for details.
[DVD-A]
≥Play restarts from the beginning of the soundtrack when changing
soundtracks that are accompanied by still pictures.
≥Even if a second soundtrack isn’t recorded, two soundtrack
numbers will normally be shown when you press [AUDIO]. The
soundtrack currently playing is number 1.
Signal type/data
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits ch (channel): Number of channels
Example:
3
/2 .1ch
[DVD-A] (Motion picture parts only)
[DVD-V] [VCD] (SVCD only)
You can change the subtitle language and turn the subtitles on and off
.
[RAM]
You can turn the subtitles on and off.
During play
Press [SUBTITLE].
The number changes each time you press the button.
≥In some cases, the subtitle language is not changed to the
selected one immediately.
To clear/display the subtitles
1 Press [SUBTITLE].
2 Press [1]. ([DVD-A] [DVD-V] [VCD])
3 Press [3, 4] to select “OFF” or “ON”.
∫ Changing the position and brightness of the
subtitles (➡ page 26)
Soundtracks
AV SYSTEM
TV/AV
DISC
PAGE
GROUP
SEQUENTIAL
REPEAT
PLAY MODE
FL DISPLAY
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFER
LEVEL
SLEEP
C.S.M
ZOOM
AUDIO
AV EFFECT
P.MEMORY
S.POSITION
SFC
C.FOCUS
S.SRND
MIX 2CH
PL
TEST
CH SELECT
DR COMP
QUICK REPLAY
DELAY TIME
SUBTITLE
RETURN
TV VOL
s
TV VOL
r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING
DIGITAL
AUX
SHIFT
∫
DISC
DISC 1
DISC 5
342 1
ENTER
DISC 1 DISC 2
DISC 4 DISC 5
DISC 3
S
10/-/--
123
456
78
0
9
PLAY MODE
1
SUBTITLE
AUDIO
CANCEL
Numbered
buttons
192k24b 2ch
LPCM
Digital
Î
1
1
1 English 3/2.1 ch
[DVD-A]
[DVD-V]
Soundtrack selected
Soundtrack playing
Audio language
Number of
channels (➡ right)
Signal type/data
(➡ right)
LR>L )R
[RAM] ]VCD]
.1: Low frequency effect
.1: (not displayed if there is no signal)
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter
Subtitles
I love you
English
ON
1
Je t’aime
French
ON
2
Example [DVD-V]
19
RQT6756
Disc operations
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
[DVD-A]
The unit plays tracks in all the groups on a disc.
Press [1] (play).
You can select up to 24 items to play in the order you choose.
[VCD] [CD] (There is no on-screen display.)
You can program all the items on discs.
[DVD-A] [DVD-V] [WMA] [MP3]
You can program all the items on a disc in the play position.
1 [VCD] [CD]
Press the [DISC] and then the disc
button ([DISC 1]–[DISC 5]).
2 Press the numbered buttons to select
a title, chapter, group or track ([WMA] [MP3]
then press [ENTER]).
≥To select a 2-digit number
Example: To select item 25, press [S10] ➡ [2] ➡ [5].
[WMA] [MP3] [2] ➡ [5] ➡ [ENTER]
≥Repeat this step to program other items.
≥[VCD] [CD]
Step 1 is unnecessary when programming tracks on the
same disc.
≥[DVD-A] [DVD-V] [WMA] [MP3]
To select an item using the cursor buttons
Press [ENTER] and [3, 4] to select an item, then press
[ENTER] again to register the number.
All the items in the selected disc, title or group are selected
when you select “ALL”.
3 Press [1] (play).
To add or change the program
[VCD] [CD] (Add only)
Repeat steps 1 and 2.
[DVD-A] [DVD-V] [WMA] [MP3]
Press [3, 4] to select an available item, then repeat step 2.
To clear an item
[VCD] [CD]
Press [CANCEL].
[DVD-A] [DVD-V] [WMA] [MP3]
1 Select the item you want to clear with [3, 4].
2 Press [CANCEL], or select “Clear” with [3, 4, 2, 1] and press
[ENTER].
To clear the whole program
[VCD] [CD]
Press [∫] so “CLEAR” is displayed.
[DVD-A] [DVD-V] [WMA] [MP3]
Select “Clear all” with [3, 4, 2, 1] and press [ENTER].
\Note\
≥[DVD-V] [WMA] [MP3]
Times are not displayed while programming.
≥[VCD] [CD]
Items the unit cannot find can be programmed but are canceled
during play. This is also the case if you program DVD-RAM, DVD-
Audio, DVD-Video, WMA, MP3 and JPEG.
≥The program is cleared when you switch the unit to standby, select
another source, exit the program mode by pressing [PLAY MODE]
or move the disc out of the play position.
[VCD] [CD]
The program is retained in memory.
[VCD] [CD] (There is no on-screen display.)
1-DISC (RND): You can play a disc in the play position in random
order.
ALL-DISC (RND): You can play all discs in random order.
[DVD-A] [DVD-V] [WMA] [MP3]
You can play items on a disc in the play position in random order.
1 [DVD-A] [DVD-V]
Press the numbered buttons to select
a title or a group.
[DVD-A]
≥You can select more than one group.
≥To enter all groups, select “All” using [2, 1] and press
[ENTER].
≥To deselect a group, press the numbered buttons
corresponding to the group you want to clear.
2 Press [1] (play).
[Note\
During random play, empty trays are skipped and the playback
control function on Video CDs is canceled.
\Note\
Disable HighMAT disc play to use random and program play.
In the SETUP menu, set “HighMAT” to “Disable” (➡ page 33) and perform the necessary operations (➡ above).
Common procedures for all group, program
and random play
While stopped
Press [PLAY MODE].
Each time you press the button:
[DVD-A] [DVD-V] [WMA] [MP3]
All group ([DVD-A])>Program> Random>off (Normal play)
^-------------------------------------------------------------------------------------}
[VCD] [CD]
(PGM)>1-DISC (RND)>ALL-DISC (RND)>off (Normal play)
^------------------------------------------------------------------------------------------}
[DVD-A]
If you select bonus groups, you will have to enter a password
(➡ page 17).
All group play
Program play
PROGRAM
Choose a title and chapter, then press ENTER.
No Time
T
Press PLAY to start
Play
Clear
Clear all
SELECT
ENTER RETURN
1
C
SELECT
NUMBER
09
Example [DVD-V]
TRCK
PGM
Disc No.
Track No. Program No.
Example [CD]
Random play
Random Playback
Title 1
0Press PLAY to start
RND
Example [DVD-V]
20
RQT6756
Disc operations
Discs—Convenient functions
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
You can mark a position so you can return to it easily at a later time.
1 During play
Press [DISPLAY] until the unit
information screen is displayed
(➡ page 25).
2 Press [3, 4] to select the play menu.
3 Press [2, 1] to select “Marker” and
press [ENTER].
[RAM]
Press [1] to select an asterisk (¢).
4 Press [ENTER] at the point you want
to mark.
To mark another position
Up to 5 points ([RAM] only: up to 999 points)
1 Press [1] to select “
¢”.
2 Press [ENTER] at the point.
To recall or erase a marker
1 Press [2, 1] to select a marker.
2 Press [ENTER] to recall or press [CANCEL] to erase.
[RAM]
To mark the eleventh point and beyond
1 Press [2
,
1] to select the marker pin icon.
2 Press [3, 4] to select “11–20”.
You can select the next group when the current group is full.
[Note]
Markers added with this unit clear when you switch the unit to
standby, change the source, or change the disc.
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
Change the zoom ratio so the picture expands to the optimum size to
fill the screen.
Preparation
Change the setting “TV Aspect” to suit your television (➡ page 33).
During play
Press [SHIFT]i[ZOOM] to select the
aspect ratio.
Each time you press the button:
4:3 Standard>European Vista>16:9 Standard
:;
Cinemascope2<Cinemascope1<American Vista
≥Refer to the disc’s instructions and “Screen size” below for the
aspect ratio of the picture.
To restore the original ratio
Press [SHIFT]i[ZOOM] until the ratio returns to 1.00.
≥The ratio also returns to 1.00 when you change the disc, change
the source or switch the unit to standby.
≥The ratio may return to 1.00 when a menu is displayed.
Making fine adjustments to the zoom ratio
While the ZOOM icon is displayed
Press [3,4].
The ratio changes in 0.01 units between 1.00 and 1.60 and in 0.02
units between 1.60 and 2.00.
∫ Screen size
Movies are made using a variety of screen sizes.
Marking places to play again
AV SYSTEM
TV/AV
DISC
PAGE
GROUP
SEQUENTIAL
REPEAT
PLAY MODE
FL DISPLAY
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
SUBWOOFER
LEVEL
SLEEP
C.S.M
ZOOM
AUDIO
AV EFFECT
P.MEMORY
S.POSITION
SFC
C.FOCUS
S.SRND
MIX 2CH
PL
TEST
CH SELECT
DR COMP
QUICK REPLAY
DELAY TIME
SUBTITLE
RETURN
TV VOL
s
TV VOL
r
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCH
123
456
78
0
9
TUNER/BAND DVD/CD
TV VCR
ENTER
SETUP
MUTING
DIGITAL
AUX
S
10/-/--
SHIFT
DISC 1 DISC 2
DISC 4 DISC 5
DISC 3
SHIFT
CANCEL
DISPLAY
342 1
ENTER
ZOOM
OFF
Marker
Variable Zoom function
1–10
12345678910
x1.00
0 0
Zoom display
Subtitle Brightness
(➡ page 26)
Subtitle Position
(➡ page 26)
Example [DVD-V]
16:9 Standard (16:9)
4:3 Standard (4:3)
European Vista (1.66:1)
American Vista (1.85:1)
Cinemascope1 (2.35:1)
Cinemascope2 (2.55:1)
Example [DVD-V]
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Panasonic SCHT700EB Owner's manual

Panasonic
Brand
Panasonic
Model
SCHT700EB
Category
DVD players
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents