De Dietrich DHX1101X Owner's manual

EN GUIDE TO INSTALLATION

IT MANUALE D’USO

Hotte plan de travail

Worktop hood

DHD1100X

DHD1102X

DHX1101X

ES MANUAL DE UTILIZACIÓN

FR GUIDE D’UTILISATION

Cappa per piano di lavoro

Campana aspirante para mesa de trabajo

Page is loading ...

4

SOMMAIRE

FR

1/ A L’ATTENTION DE L’UTILISATEUR 5

- Consignes de sécurité 5

- Montage de votre hotte 6

- Description de votre appareil 6

2 / COMMENT INSTALLER VOTRE HOTTE 7

- Montage du moteur séparé 8

- Montage et demontage des filtres anti-graisse 9

- Montage et demontage des filtres charbon 9

- Raccordement de votre hotte 9

3 / COMMENT FONCTIONNE VOTRE HOTTE 10

4 / COMMENT NETTOYER VOTRE HOTTE 11

5 / ANOMALIES DE FONCTIONNEMENT 12

6 / SERVICE D’ASSISTANCE APRÈS-VENTE 12

Page is loading ...

14

ÍNDICE

ES

1/ A LA ATENCIÓN DE LOS SEÑORES USUARIOS 15

- Instrucciones de seguridad 15

- Montaje de la campana 16

- Descripción del aparato 16

2 / CÓMO INSTALAR LA CAMPANA 17

- Montaje del motor separado 18

- Desmontaje del filtro de cartucho 19

- Montaje del filtro de carbono 19

- Enlaces eléctricos de la campana 19

3 / CÓMO FUNCIONA LA CAMPANA 20

4 / CÓMO LIMPIAR LA CAMPANA 21

5 / DEFECTOS DE FUNCIONAMIENTO 22

6 / SERVICIO POSTVENTA 22

Page is loading ...

23

Dear client,

You have just purchased a DE DIETRICH range ventilation hood, and we

thank you for your purchase.

Our research and development teams have designed a new generation of

appliances for you, which, because of their aesthetics, functionality, and

technological evolution, are truly exceptional products representative of our

design experience.

Your new DE DIETRICH range ventilation hood will harmoniously suit your

kitchen and will perfectly combine ventilation performance and ease of use.

We simply want to offer you an excellent product.

Within the DE DIETRICH product line you will find a wide range of ovens,

microwave ovens, cookers, washing machines, and fitted refrigerators that

can be freely coordinated with your new DE DIETRICH range ventilation

hood.

Naturally, since our objective is the satisfaction of our clients towards our

products, our customer service is at your total disposition to respond to any

request and receive any useful suggestion (reference details at the end of

the booklet).

Visit our web site www.dedietrich-elecromanager.com where you will find

our latest innovations as well as all useful information.

DE DIETRICH

The new objects of value

www.dedietrich-electromenager.com

Constantly seeking to improve our products, we reserve the right to modify their

technical, functional, or aesthetic characteristics as they evolve.

Important: Before activating the appliance, read the installation and usage

manual carefully to familiarise yourself more quickly with its operation.

EN

FR

ES

IT

3

13

23

33

24

CONTENTS

EN

1/ FOR THE ATTENTION OF THE USER 25

- Safety instructions 25

- Mounting the hood 26

- Description of the appliance 26

2 / HOOD INSTALLATION 27

- Remote motor installation 28

- Removal of the filter cartridge 29

- Mounting the carbon filter 29

- Electrical hook-up of the hood 29

3 / HOW THE HOOD WORKS 30

4 / CLEANING THE HOOD 31

5 / OPERATIONAL ANOMALIES 32

6 / AFTER SALES SERVICE 32

25

1/ FOR THE ATTENTION OF THE USER

EN

Important: keep these instructions for use with the appliance. If the appliance should be

sold or passed on to others, make sure that the instructions are passed on with it. Please take

note of these suggestions before installing and using the appliance. They have been written

for your personal safety and the safety of others.

The manufacturer cannot accept any liability for problems, damage, or fire caused on or

by the appliance due to failure to follow the instructions in this manual.

- SAFETY INSTRUCTIONS

These hoods have been designed for personal use in the home. The appliance must be used

by adults. Take care that children do not touch the appliance and do not use it as a toy. Make

sure that children do not operate the controls.

- Upon delivery of the appliance, remove the packing material yourself or have it removed im-

mediately. Check the overall condition of the appliance. Note any observations on the delivery

bill and keep a copy. Your appliance is designed for normal use in the home. It is not designed

for commercial or industrial use, or for purposes other than those for which it was designed.

- Do not ever modify, or attempt to modify, the design characteristics of this appliance. This

could result in danger.

Repairs must be performed only by an authorised specialist.

Always disconnect the hood before carrying out cleaning or maintenance operations.

- Adequately ventilate the area in case the hood is activated simultaneously with other appli-

ances powered from non-electrical sources so that the hood does not ventilate these com-

bustion fumes.

- It is prohibited to cook food over open flames or operate gas hobs without pots or pans on

them under the hood itself (the flames sucked into the hood might damage the appliance).

- Deep frying under the appliance must be done under constant supervision as hot oils and

fats may ignite.

Respect the guidelines for cleaning and replacement of the filters. Accumulated deposits of

grease are a fire hazard.

- The use of combustible materials (wood, charcoal, etc…) on the hobs is not permitted.

Never use steam or high-pressure devices for cleaning your hood (regulations regarding elec-

trical safety).

Constantly seeking to improve our products, we reserve the right to modify their technical,

functional, or aesthetic characteristics as they evolve.

In order to find the notes regarding your appliance easily in the future, we advise you to collect

them on the page “After sales service and customer relations”. (This page also explains where

to find them on your appliance).

Never use the cooker hood without grease filters.

The minimum distance between the cooker hood and the cook top must be 400 mm.

Never put your hands in the field of action of the cooker hood extractable unit, during han-

dling operations.

26

- DESCRIPTION OF THE APPLIANCE

- MOUNTING THE HOOD

Installation must conform to the regulations in force regarding the ventilation of enclosed envi-

ronments. In France, these regulations are container in the DTU 61.1 of the CSTB. In particular,

discharged air must not be channelled into a conduit used for exhaust discharge or discharge

from devices that operate with gas or other combustible materials. The use of unused conduits

is not permissible without the approval of a qualified technician.

27

2/ HOOD INSTALLATION

EN

A correct installation must be carried out for the good functioning of the downdraft.

1) Make a rectangular hole in the rear part of the furniture’s surface suitable for the dimen-

sions of your hood (Fig. 1).

2) If a gas hob is utilised, the minimum distance from the rear edge of the cooking hob to the

downdraft must be at least 50 mm. The DHD1101 model must be installed between two

cooking hobs with a maximum of two gas rings each.

3) Before cutting the hole, check that there are no internal structural parts of the furniture

or other elements in correspondence to the hood zone that could compromise the correct

installation.

To permit the installation, verify that the overall dimensions of the hood including its motor

are compatible with the furniture.

The motor is delivered already attached to the equipment so as to avoid any damage dur-

ing transportation. The motor must be removed from the hood before starting installation

operations.

4) Apply the glue to the lower part of the hood’s edge (Fig. 2).

5) Insert the downdraft inside the furniture from the top.

6) The edge of the hood must be perfectly fixed to the upper surface of the kitchen furniture.

7) Fix the hood inside the furniture utilising the two supplied brackets (fig. 3).

8) Proceed with the assembly of the motor onto the body of the hood orientating the air outlet

to the desired higher or lower position (Design 4).

The motor can be fitted in the front or rear part of the hood.

To install the motor in the rear part, proceed as follows: unscrew the plate situated in the

rear part of the hood, screw the motor to the hood in place of the plate, correctly connect

the motor cable and screw the plate back onto the front part of the hood. Attach the air

extractor tube (not supplied). Connect the other end of the tube to the outside of the fur-

niture for a filter installation or to the outside of the habitation for an extractor installation

(Fig. 5).

Attention: To avoid damaging internal sliding components such as the electrical parts, do

not make other holes in the product.

9) Position the metal box containing the electronic components in an easily accessible posi-

tion for any eventual assistance intervention. Connect all electrical connectors to the hood.

10) Connect the hood to the electrical mains circuit.

11) Once the installation has been completed and the hood has been connected to the electrical

mains circuit, start the extraction of the carriage (refer to the chapter about how the hood

functions) and remove all protective material (Fig. 6 and Fig. 7).

28

UTILISATION

This product is intended to extract fumes, fats, and steam from cooking. It has been designed

e either in the suction or filter versions.

The air extractor tubes are not supplied as standard.

Version with exterior evacuation

The hood is equipped with an air outlet (Refer to the image below).to convey smoke outwards

(the flue pipe and fixing flange are not supplied).

In filtering application that the stop valve doesn’t permit the entrance of wind and exhausted

air.

Filtering version

In the case an exhausting hole is not possible, the hood can be used in filtering version. For

this mode charcol filters are to be fitted inside the hood. Filtered air will be evacuated in the

kitchen trough a duct that conveys the air on a side of the cabinet (Fig. 5).

- REMOTE MOTOR INSTALLATION

It is possible to install the motor in a remote position from the cooker hood, but it is necessary

to order the DHK900 - 989580001 kit.

29

- REMOVAL OF THE FILTER CARTRIDGE

- MOUNTING THE CARBON FILTER

The cooker hood must be in the open position to install and remove its grease filters and

charcoal filters. Push this key

to do so. Remove the front panel by simultaneously pulling

on the upper part of each side (Fig. 8). The panel will rotate forwards to make it possible to

access the grease filters (Fig. 9). Remove the grease filters to access the carbon filters (Fig. 9).

The carbon filters should be changed according to the frequency of downdraft use and in any

case, once every 6 months.

Warning: the stainless steel panel that protects the filters needs to be repositioned cor-

rectly. Incorrect positioning can cause the hood to stop completely.

- ELECTRICAL HOOK UP OF THE HOOD

USEFUL ADVICE:

We recommend fitting the electronic board at a height of at least 10 cm from the ground and

at a suitable distance from all heat sources (e.g., the side of an oven or cook top).

This appliance is fitted with an H05 VVF 3 conductor, 0.75 mm

2

(neutral, phase, and

ground) power cable. This can be hooked up to a 220 – 240 V mono-phase electrical net-

work by way of a CEI 60083 regulation power socket that must remain accessible after

installation, in conformity to installation regulations.

We decline all responsibility in case of accident caused by a lack of ground connection

or incorrect ground connection. The fuse used must be 10 or 16 A. If the power cable is

damaged, call the after-sales service to avoid any risk.

ELECTRIAL HOOK UP

This appliance conforms to the European Directives 2006/95/EC (Low Voltage Directive)

and 2004/108/EC (Electromagnetic Compatibility).

When you install the appliance and carry out maintenance, it must be unplugged from the

power source or the fuses must be disengaged or removed. Electrical hook up must be carried

out before the appliance is installed in the cabinet.

Check that:

- The power source is sufficient.

- Power cords are in good condition.

- The diameter of the cables conforms to installation regulations.

Attention:

If the hood presents some form of anomaly, unplug the appliance or remove the fuse corre-

sponding to the appliance’s power line.

30

It is used to close the aspiration panel completely or to position it at intermediate

heights at least cm 18 above the cooktop. While closing the aspiration panel keeps

on working at the speed set up to the height of cm 18 from the cooktop. Below this

height the aspiration function is automatically cut out.

It is used to extract the aspiration panel up to the maximum height of cm.

30 and to set automatically the first aspiration speed when reaching the height of

cm 18 from the cooktop.

When pressing the button again after reaching this height, the aspiration motor

speed can be encreased.

If the aspiration panel is positioned at an intermediate height between cm 18 and cm

30, the aspiration panel can start raising again by pressing first

and then .

The different speed levels are indicated by blue leds.

It is working only if the position reached by the aspiration panel is higher than cm 18

from the cooktop. It is used to decrease the aspiration motor speed.

It is used to stop automatically the aspiration system and to close automatically the

aspiration panel ten minutes it has been set.

Calibration of the hood

After installing the hood and connecting the equipment to the electrical mains circuit, press

the red button positioned on the box of the electrical installation that is separated by the hood

and start the self-calibration procedure of the product by carrying out the following instruc-

tions:

1. Press the

key to activate the extraction of the filter unit.

2. When the carriage has reached a height of 18 cms press the

key to stop the carriage

rising.

3. Press the

key and then the

key within 2 seconds.

The hood carries out the calibration of the filter unit by shifting the carriage up and down by

a few cms. During this phase the keys on the keypad flash.

When the calibration is finished, press the

key so that the hood closes.

Then switch on the hood. When the carriage is completely raised, release the panel by lightly

pulling on the sides, remove the PVC protection of the anti-grease filters and position the

filters as indicated in Fig. 9.

Attention: The calibration must be carried out correctly because this contributes to your safety

whilst using the equipment to avoid being crushed by the carriage during the descent phase.

3/ HOW THE HOOD WORKS

EN

31

4/ CLEANING THE HOOD

EN

Careful maintenance helps guarantee proper operation and good results from an appliance

over time

The hood must be unplugged from the electrical power source, both by unplugging

the appliance from the socket as well as de-activating the breaker, before removing the

metal filters. After cleaning, you must replace the metal filters as outlined in the instruc-

tions..

MAINTENANCE HOW TO PROCEED? ACCESSORY/PRODUCTS TO USE

External surfaces

and

accessories

Do not use metallic scrubbers,

abrasive products, or hard

brushes.

To clean the external surfaces of the

hood and the light housing screen

use only commercially available

household detergents diluted in wa-

ter. Then rinse with clean water and

dry with a soft cloth.

Filter cartridge

After 30 hours’ operation, the

button pad will signal that the

grease filter is saturated by

flashing the 4 speed LEDs.

Press the timer button to re-

set

.

The grease filters can be washed by

hand or in the dishwasher. These fil-

ters need to be cleaned on a regular

basis because otherwise they may

present a fire risk. Refit the grease

filters and front panel, making sure

that the panel is properly fitted at the

sides so that it does not cause the

downdraft to stop operating.

Carbon filter

In the recirculation mode, you

must substitute the active

carbon filter periodically.

To remove the fibre panel you

must first remove the anti-

grease grill and pull the plas-

tic knob on the panel itself,

removing it from its housing.

To replace the active carbon

filter, do the reverse. Replace

the used carbon filter on an

average of every six months.

OTHER FUNCTIONS:

• After 30 hours of appliance operation, the pushbutton panel indicates saturation of the

grease filters by the buttons flashing. To reset, press the timer button

.

• After 4 hours of continuous operation from the last setting, the appliance turns off and

closes automatically.

• When the front panel is removed for cleaning and maintenance operations, all the elec-

tronic aspiration and movement functions are locked.

• Anti pinching safety device: if anything is obstructing the closure operation of the down-

draft, the operation will stop and the downdraft will move up again.

32

6/ AFTER SALES SERVICE

EN

Any maintenance on your equipment should be undertaken by:

- either your dealer,

- or another qualified mechanic who is an authorized agent for the brand appliances.

When making an appointment, state the full reference of your equipment (model, type and

serial number). This information appears on the manufacturer’s nameplate attached to your

equipment.

5/ OPERATIONAL ANOMALIES

EN

SYMPTOM SOLUTION

The hood does not

work...

Check that:

• Thereisnotapoweroutage.

• Aspecificspeedhasactuallybeenselected.

• Theredresetkeypositionedabovetheelectricalinstallationboxis

pressed.

• Checkthattheleadsarewellinsertedintothenine-poleconnector

(too much pressure when making the connections could bend the

contacts).

The hood has low

output...

Check that:

• Themotorspeedselected is sufficient forthequantity of fumes

steam present.

• Thekitchenisventilatedwellenoughtoallowforairintake.

• Thecharcoalfilterhasnotbeenused(filteringmodeversion).

• Theairoutletconduitisunobstructedandconformstoparagraph2.

The cooker hood

does not close

again.

Check that:

• Thereisnotapoweroutage.

• Thesingle-polecontactorbreakerswitchhasnottripped.

33

EN

FR

ES

IT

Gentile cliente,

Lei ha appena acquistato una cappa DE DIETRICH e di questo La ringra-

ziamo.

I nostri team di ricerca hanno progettato per Lei una nuova generazione di

apparecchi che, per la loro qualità estetica, funzionalità e evoluzione tec-

nologica rappresentano dei prodotti d’eccezione che testimoniano la nostra

esperienza.

La Sua nuova cappa DE DIETRICH si integrerà armoniosamente nella sua

cucina e coniugherà perfettamente performance di aspirazione e facilità

d’uso. Abbiamo voluto offrirLe un prodotto di eccellenza.

Nella gamma dei prodotti DE DIETRICH potrà trovare inoltre un’ampia scel-

ta di forni, forni a microonde, piani di cottura, lavastoviglie, frigoriferi da

incasso, liberamente coordinabili con la sua nuova cappa DE DIETRICH.

Poiché, come è naturale, il nostro obiettivo coincide con la soddisfazione

dei nostri clienti per i nostri prodotti, il nostro servizio consumatori è a Sua

completa disposizione, per rispondere a qualsiasi richiesta e per accogliere

ogni utile suggerimento (i riferimenti alla fine di questo libretto).

Collegatevi inoltre al nostro sito www.dedietrich-elecromanager.com dove

potrete trovare le nostre ultime innovazioni oltre a tutte le informazioni

utili.

DE DIETRICH

I nuovi oggetti di valore

3

13

23

33

www.dedietrich-electromenager.com

Nell’intento costante di migliorare i nostri prodotti, ci riserviamo il diritto di ap-

portare alle loro caratteristiche tecniche, funzionali o estetiche, tutte le modifiche

derivanti dalla loro evoluzione.

Importante: Prima di azionare l’apparecchio leggere attentamente il manua-

le di installazione e d’uso per familiarizzare più rapidamente con il suo fun-

zionamento.

34

INDICE

IT

1/ ALL’ATTENZIONE DELL’UTENTE 35

- Istruzioni di sicurezza 35

- Montaggio della cappa 36

- Descrizione dell’apparecchio 36

2 / COME INSTALLARE LA CAPPA 37

- Montaggio del motore separato 38

- Smontaggio del filtro cartuccia 39

- Montaggio del filtro a carbone 39

- Connessione elettronica della cappa 39

3 / COME FUNZIONA LA CAPPA 40

4 / COME PULIRE LA CAPPA 41

5 / ANOMALIE DI FUNZIONAMENTO 42

6 / SERVIZIO DI ASSISTENZA POST VENDITA 42

Page is loading ...

43

1

2

3

5

4

44

6

7

8

9

91051201112 - B - 09/2011

Graphics by: X TYPE ENGINEERING S.r.l

FAGORBRANDT SAS

Locataire Gérant- société par actions simplifiée au capital de 20.000.000 Euros - RCS Nanterre 440 303 196

De Dietrich DHX1101X Owner's manual

This manual is also suitable for

De Dietrich DHX1101X Owner's manual

in other languages

Related papers

Other documents